Black Noise Modular - Voltage Processor
only 1 left
Voltage Processor is designed to pack a lot of features in a small module.Here a some of the features you can achieve with Voltage Processor. You can find how to setup those features in the manual below.Features:• Dual VCA• Stereo VCA• CV Crossfader 2:1• CV Crossfader 1:2• Dual AM• CV PAN• Dual Attenuator• Dual Inverter• Dual Offset generator• Dual Voltage generator• Dual Exponential converter• Logarithmic converter• Dual PWM• Dual CV overdrive• Dual waveshaper• Complex waveshaper• Dual RingMod• RindMod• Compressor• Sidechain compressorDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€140.00*
Dannysound - Dynamics
only 1 left
The Dannysound Dynamics is a compressor / expander originally designed to process drums but like most processing devices, it can be used for a wide variety of applications.The module comprises of:• Compressor / Expander• Sub Bass Enhancer• 3 Band Inductor-based EQ• Harmonic ExciterThe compressor / expander section uses a discrete transistor-based circuit that allows for soft clipping when overdriven.The envelope detector is known as a feedforward type of circuit; taking it’s input from the signal before it goes to the compressor rather than after.This type of circuit is known for having fast attack times.The Sub Bass enhancer has its own compression circuit that “ducks” the initial transient. This allows the sub bass to be increased without distortionon the transient peaks increasing the overall level.There is a MIX control to allow the unprocessed signal to be mixed back in with the processed signal.The 3 band EQ is an inductor based LCR design. After trying out various EQ topologies this was the design that sounded the nicest.When overdriven it gives a nice “bite” to the sound and it has a certain characterful charm that’s hard to put into words.The controls have a response that are subtle to begin with and get more pronounced as the controls are increased.The Harmonic Exciter adds a little distortion to the high frequencies which bring out the sparkle of cymbals or the snap snare drums.The operating bandwidth can be switched between Low (snare drum snap) or High (Cymbals sparkle).There are inputs for side chaining and control with an external envelope as well as an envelope out to make the envelope detector output available to drive other modules.It also features separate inputs and outputs for the Compressor / Expander and EQ sections, so they could be used as 2 separate modules.Features:• Compressor / Expander• Sub Bass Enhancer• 3 Band Inductor-based EQ• Harmonic Exciter• Envelope In/Out• Sidechain Input• Separate In/Out for Comp/Exp and EQ sectionsDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
€210.00*
Erica Synths - EDU DIY Compressor
available
Need some professional polish in your modular system? With this simple diode-based compressor, you can shape the dynamics of your sound, adding punch and consistency to your patches. Whether you’re looking to beef up your basslines, add sustain to your leads, or tame the peaks of your percussion, this circuit’s got you covered.Erica Synths and Moritz Klein - have developed a series of educational DIY kits under the brand name mki x es.EDU with one specific goal in mind: to teach people with little-to-no prior experience how to design analog synthesizer circuits from scratch. What you’ll find in the box is not simply meant to be soldered together and then disappear in your rack. Instead, we want to take you through the circuit design process step by step, explaining every choice we’ve made and how it impacts the finished module.NB! All kits in these series are simple and come with extensive user manuals which can be downloaded separately, therefore we will not provide customer support in case your DIY build fails to function or similar.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
€79.90*
New
Feedback - 4XXX Compressor
only 2 left
The 4XXX Compressor is a audio tool inspired by the legendary British stereo bus compressor that has shaped the sound of countless hit records since the 1980s. Often referred to as the “glue compressor,” it helps your entire mix come together seamlessly, delivering a polished, professional sound heard on classic and modern albums alike.Perfect for mixing and mastering, the 4XXX Compressor adds punch, warmth, and cohesion—especially to drums, making them pump, breathe and groove.This module is the result of a collaboration between Feedback Modules and CMS-LAB.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
€200.00*
Feedback Modules - Squeeze 2
available
4HP Compressor designed for continuous adjustment of gain, threshold and compression ratio with a single potentiometer. There is also a knob for input level and a knob for make-up gain. The module is based on high-performance THAT4305 Blackmer® VCA chip.Features:• 1 audio input (In)• 1 audio level pot (Input)• 2 control pots:Less/More = compression, Make-Up Gain• 1 output (Out)DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
€59.50*
Ginko Synthese - Magma
available
Magma is a 10 HP Eurorack compressor with novel circuitry and a classic sound.The Magma uses feedforward diode-bridge compression which gives it a unique character. The Magma excels in providing punch, and can pump hard when set to extreme settings.The interface is easy to control and designed for live performance – it’s easy to change the entire groove with just a few controls. The glass orb lights up like hot lava and visualizes the amount of compression being applied.Sculpt your sound in even more detail with the cv and audio side chain inputs. The Magma aims to make compression both creative and fun!DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
€126.14*
Threetom Modular - Doppio
only 1 left
The Threetom Modular Doppio is a compact stereo amplifier, drive, and soft limiter module. Doppio helps complex and dynamic stereo sounds to find their place in a modular synthesizer context, where signals are hot, and headroom is extremely limited. Doppio does this by implementing a compact, yet flexible, soft-knee limiter. The limiter is specifically designed for eurorack levels and avoids the need for unnecessary make-up gain, resulting in a lower noise floor.Doppio offers three different gain settings (x1, x5, x21), and three different ratios (linear, drive, and limit). In addition to this Doppio has gain and volume knobs for more precise control. Different combinations of these settings cater to applications like saturating complex stereo signals without turning them into mush, end-of-chain limiting, and boosting line level signals to eurorack level, while still retaining enough oomph to also saturate them nicely. Finding the right settings is made easy by DOPPIO’s unique coffee-bean-shaped indicator lights.Even though Doppio’s architecture is stereo, that doesn’t mean it has no uses on mono signals: Either process two mono signals with identical settings, or chain the two channels to form a two-stage high-gain mono drive. Finally, it’s important to note that Doppio is DC-coupled and can also be used to process CV signals.In summary: Doppio is to your signals what a double espresso is to you – it makes you bigger and bolder – and you know you’re hooked when the withdrawal symptoms kick in.Features:• Three different maximum levels of gain: x1 (0dB), x5 (+14dB) and x21 (+26dB)• Three different soft-clipping modes: Drive mode, Off / linear mode and Limit mode• Caffeine knob for fine control over the gain applied to the inputs• Volume control for post-gain attenuation• Coffee-bean-shaped indicator lights make finding the desired settings easy• Reverse power protection• 4-layer PCB design with completely separate of audio supply rails and groundDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€124.95*