Plinky & Crey - Bib, Buzzrito & Blueberry
Product number:
100937
Product information "Plinky & Crey - Bib, Buzzrito & Blueberry"
Meet Bib, Buzzrito, and Blueberry – three playful and powerful Plinky-inspired modules that bring rich sound design and expressive touch control to your Eurorack setup. Designed by Alex Evans (creator of Plinky) and Ray Yokell (CrazyEmperor893 of The Crey Emporium), these unique characters break out Plinky’s sensitivity into three specialized creatures: Bib, a stereo effect chain with drive, delay, and lush reverb; Buzzrito, a lively swarm oscillator with 2D touch control and CV-morphing presets; and Blueberry, a generative touch sequencer that responds to pressure and gesture with pitch and gate outputs. Each module stands strong on its own, but they shine even brighter together, combining tactile control and rich stereo sound.
Features:
Bib
• Stereo drive, delay, and reverb effects with touch-based page selection
• Real-time modulation via pressure-sensitive interface
• CV input assignable to any parameter using tap-and-turn gesture
• Rear TRS stereo I/O header (Intellijel-compatible) for line or headphone output
Buzzrito
• Stereo swarm oscillator with 2D touchplate for preset morphing
• Seven built-in presets with XY CV control and looping gesture recording
• V/Oct and Gate inputs for easy integration into any Eurorack voice chain
Blueberry
• Generative touch sequencer with 5 pressure-sensitive pads
• Record and play up to 5 pitch patterns with individual tunings
• CV control for transposition, memory selection, clocking, and scrub
• Clocked mode with expressive step sequencing and preserved dynamics
DIY-Kit-Type:
SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
Features:
Bib
• Stereo drive, delay, and reverb effects with touch-based page selection
• Real-time modulation via pressure-sensitive interface
• CV input assignable to any parameter using tap-and-turn gesture
• Rear TRS stereo I/O header (Intellijel-compatible) for line or headphone output
Buzzrito
• Stereo swarm oscillator with 2D touchplate for preset morphing
• Seven built-in presets with XY CV control and looping gesture recording
• V/Oct and Gate inputs for easy integration into any Eurorack voice chain
Blueberry
• Generative touch sequencer with 5 pressure-sensitive pads
• Record and play up to 5 pitch patterns with individual tunings
• CV control for transposition, memory selection, clocking, and scrub
• Clocked mode with expressive step sequencing and preserved dynamics
DIY-Kit-Type:
SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
| Current draw +12 V [mA]: | 307 |
|---|---|
| Current draw -12 V [mA]: | 14 |
| DIY Level: | Easy/Medium |
| Depth [mm]: | 38 |
| Width [HP]: | 12 |
| Format: | 3U |
| Panel / Color: | Black FR4 |
Manufacturer / Hersteller:
Making Sound Machines Nebe, Gissel GbR
Flurstr. 68
40235 Düsseldorf
Germany
post@makingsoundmachines.com
Product Safety Information
Eurorack DIY Kits
Important Notice & Intended Use
Please read this safety guide before installation or use. This kit is intended for adult users experienced in electronics and modular synthesis. Assembly, including soldering, is required. Proper testing and installation are essential to ensure safe and functional operation. The completed module is intended for installation in a Eurorack-compatible synthesizer system powered by ±12V and +5V.
General Warnings
1. Electrical Hazards:
• Ensure the power supply matches the module’s specified voltage and current ratings (refer to the product manual). Incorrect voltage can damage the module and pose a safety risk.
• Never connect or disconnect the module while the Eurorack system is powered on.
• Wrong polarity can damage your module or system. Make sure the module is connected with correct polarity.
2. Heat Generation:
• The module may generate heat during operation. Ensure proper ventilation within your Eurorack case to prevent overheating.
3. Sharp Edges:
• The module’s faceplate and components may have sharp edges. Handle with care to avoid cuts or scratches.
4. Small Parts:
• Contains small parts that could cause a choking hazard. Keep away from children and pets.
5. Compatibility:
• This module is designed specifically for Eurorack-compatible systems. Connecting it to non-compatible systems may result in damage or malfunction.
Assembly Requirements
• Soldering skills are required to complete the module.
• Ensure a clean, well-lit and ventilated workspace free of flammable materials during assembly.
• Use appropriate tools and safety equipment, such as eye protection.
Testing
• Test the module thoroughly for shorts or incorrect assembly before powering it in your Eurorack system. When the unit has malfunctions due to incorrect assembly, the entire Eurorack system might be damaged. It's a good idea to test it in a separate case with only that single module.
• Use a multimeter or other appropriate tools to confirm proper functionality.
Installation and Use
• Mount securely in a Eurorack case using the provided screws.
• Use only the included or manufacturer-recommended power cable.
• Connect only when the power is off.
• Follow the module's user guide for instructions on operation. Do not exceed the input/output limits specified.
Responsibility
Users are solely responsible for proper assembly and testing. Contact manufacturer support for assistance if needed.
Environmental Safety
• Dispose of the module, its components, and packaging in accordance with local electronic waste regulations.
Liability Disclaimer
• The manufacturer or distributor is not responsible for any injury, damage, or malfunction resulting from improper installation, use, or modification of this product.
Contact Information
For further assistance, contact the manufacturer (you'll find the info under each product in our shop) or our shop support team at:
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Nonnenstrasse 19, 04229 Leipzig, Germany
support@exploding-shed.com
Making Sound Machines Nebe, Gissel GbR
Flurstr. 68
40235 Düsseldorf
Germany
post@makingsoundmachines.com
Product Safety Information
Eurorack DIY Kits
Important Notice & Intended Use
Please read this safety guide before installation or use. This kit is intended for adult users experienced in electronics and modular synthesis. Assembly, including soldering, is required. Proper testing and installation are essential to ensure safe and functional operation. The completed module is intended for installation in a Eurorack-compatible synthesizer system powered by ±12V and +5V.
General Warnings
1. Electrical Hazards:
• Ensure the power supply matches the module’s specified voltage and current ratings (refer to the product manual). Incorrect voltage can damage the module and pose a safety risk.
• Never connect or disconnect the module while the Eurorack system is powered on.
• Wrong polarity can damage your module or system. Make sure the module is connected with correct polarity.
2. Heat Generation:
• The module may generate heat during operation. Ensure proper ventilation within your Eurorack case to prevent overheating.
3. Sharp Edges:
• The module’s faceplate and components may have sharp edges. Handle with care to avoid cuts or scratches.
4. Small Parts:
• Contains small parts that could cause a choking hazard. Keep away from children and pets.
5. Compatibility:
• This module is designed specifically for Eurorack-compatible systems. Connecting it to non-compatible systems may result in damage or malfunction.
Assembly Requirements
• Soldering skills are required to complete the module.
• Ensure a clean, well-lit and ventilated workspace free of flammable materials during assembly.
• Use appropriate tools and safety equipment, such as eye protection.
Testing
• Test the module thoroughly for shorts or incorrect assembly before powering it in your Eurorack system. When the unit has malfunctions due to incorrect assembly, the entire Eurorack system might be damaged. It's a good idea to test it in a separate case with only that single module.
• Use a multimeter or other appropriate tools to confirm proper functionality.
Installation and Use
• Mount securely in a Eurorack case using the provided screws.
• Use only the included or manufacturer-recommended power cable.
• Connect only when the power is off.
• Follow the module's user guide for instructions on operation. Do not exceed the input/output limits specified.
Responsibility
Users are solely responsible for proper assembly and testing. Contact manufacturer support for assistance if needed.
Environmental Safety
• Dispose of the module, its components, and packaging in accordance with local electronic waste regulations.
Liability Disclaimer
• The manufacturer or distributor is not responsible for any injury, damage, or malfunction resulting from improper installation, use, or modification of this product.
Contact Information
For further assistance, contact the manufacturer (you'll find the info under each product in our shop) or our shop support team at:
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Nonnenstrasse 19, 04229 Leipzig, Germany
support@exploding-shed.com
Login