Befaco - Star Multiple
only 10 left
Pack of 3 units with random colors. This is a passive 1 to 5 multiple in a star shape.Features:• 1 input / 5 outputs• 3,5 mm adapter splits line into five 3,5 mm ports• Connectors: 6 x TS 3.5mm mono socket
€11.90*
Cordial - CFY 1,5 WPP
available
3,5 mm (1/8“) stereo to 2x 6,3 mm (1/4“) mono jack, 1,5m long. With this cable you could use both 6,3mm outputs of Microphonic Soundbox and send it to a stereo 3,5mm (TRS) input of devices like 1010music Blackbox etc. but of course you can use this cable for any other application, too.Features:• 1x 3,5 mm (1/8“) stereo jack connector• 2x 6,3 mm (1/4“) mono jack connector• Length 1,5 meter
€9.90*
Exploding Shed - Indicator Touch Points (+/-)
only 4 left
Pack of 2 Indicator Touch Points. These ones feature a bi-polar LED inside so you can easily detect the polarity of your signal. Of course you can use them in the same way like the original Touch Points.They are assembled and no DIY.
€19.94*
Exploding Shed - Touch Points (Black)
only 1 left
5 Touch Points in black. We made them as an extension for our Touch Source, but of course you can use them without the module for wireless patching in your Eurorack system. We made them higher and smaller than comparable products or most DIY versions, so the Touch Points are easily accessible between cables and buttons in your system.
€26.50*
Exploding Shed - Touch Points (Orange)
only 6 left
5 Touch Points in orange. We made them as an extension for our Touch Source, but of course you can use them without the module for wireless patching in your Eurorack system. We made them higher and smaller than comparable products or most DIY versions, so the Touch Points are easily accessible between cables and buttons in your system.
€26.50*
LeafAudio - ADPT-3,5-JACK-XLR-MALE-ASYM
only 7 left
Use this adaptor for connecting LeafAudio's Field Amp to symmetrical XLR inputs. As the Field Amp does not feature a symmetrical input or outputs, this adaptor is actually asymmetrical (XLR pins 1 and 3 bridged).Make sure to read the notes about inputs and outputs in the Field Amp manual, you'll find it on the LeafAudio website. www.leaf-audio.comFeatures:• Asymmetrical 3,5mm (1/8") mono jack to XLR male• Amphenol 3,5mm (1/8") mono jack• HiCon XLR connector male• Sommer Cable Onyx Tynee cable material• Length: 0,5m (~1,6 feet)
€17.90*
LeafAudio - Contact Microphone 3,5mm (1/8") Connector
only 5 left
LeafAudio Contact Mic - 3,5mm (1/8") ConnectorCable with rubber-sealed contact microphone in special housing which is electrically shielded. Means: no hum is introduced, only your crystal clear signal. Made for LeafAudio's Field Amp, but you can use it with any mixer, interface, recorder. Usable as contact mic or pressure sensor for modulars. It is rubber coated but not waterproof (it might be, but was not ment as hydrophone, but try if you feel like it - your risk).Please note that LeafAudio's Field Amp needs the 3,5mm (1/8") version, Microphonic Soundbox uses the 6,3mm (1/4") version!Available in 2 lengths:1,5m (~5 feet)3,0m (~10 feet)3,5mm (1/8") Amphenol connector and Sommer Cable Cicada wire. Small diameter, durable jacket, oxygen free copper. Diameter 2,6mm, conductor 0,14mm2, shielding factor 95%, temperature range -30°C to +70°C, resistance 148Ω/km, weight 13g/m.
€28.00*
LeafAudio - Contact Microphone 6,3mm (1/4") Connector
only 5 left
LeafAudio Contact Mic - 6,3mm (1/4") ConnectorCable with rubber-sealed contact microphone in special housing which is electrically shielded. Means: no hum is introduced, only your crystal clear signal. Made for Microphonic Soundbox (which also is a ultra low noise high class amp with 40dB amplification), but you can use it with any mixer, interface, recorder. Usable as contact mic or pressure sensor for modulars. It is rubber coated but not waterproof (it might be, but was not ment as hydrophone, but try if you feel like it - your risk).Please note that LeafAudio's Field Amp needs the 3,5mm (1/8") version, Microphonic Soundbox uses the 6,3mm (1/4") version!Available in 2 lengths:1,5m (~5 feet)3,0m (~10 feet)6,3mm (1/4") HiCon connector and Sommer Cable Cicada wire. Small diameter, durable jacket, oxygen free copper. Diameter 2,6mm, conductor 0,14mm2, shielding factor 95%, temperature range -30°C to +70°C, resistance 148Ω/km, weight 13g/m.
€28.00*
Making Sound Machines - Braided Patch Cables 30cm (5pc)
only 5 left
High-quality braided 3.5mm mono Eurorack patch cables, black.You don't get into modular synths without becoming a bit of a nerd for patch cables.We knew we wanted the braided, high-quality kind that won't suffer from the saggy plastic feel we had come to expect. And we knew we wanted them in black to complement the wild colour scheme of our synth.So we found a manufacturer that could make them to our exact specifications, and had them send us a big box of delicious cables.We think they turned out great, so we'll make them available to you as well.Each set contains five 30 cm cables, an excellent choice for self-patching a module or connecting to its neighbour.
€11.90*
Making Sound Machines - Braided Patch Cables 60cm (5pc)
only 4 left
High-quality braided 3.5mm mono Eurorack patch cables, blackYou don't get into modular synths without becoming a bit of a nerd for patch cables.We knew we wanted the braided, high-quality kind that won't suffer from the saggy plastic feel we had come to expect. And we knew we wanted them pitch black to match our preference for a fine cup of coffee.So we found a manufacturer that could make them to our exact specifications, and had them send us a big box of delicious cables.We think they turned out great, so we'll make them available to you as well.Each set contains five 60 cm cables, an excellent choice for patching across rows in a system and within the same rack.
€12.90*
Making Sound Machines - Braided Patch Cables 90cm (5pc)
only 6 left
High-quality braided 3.5mm mono Eurorack patch cables, blackYou don't get into modular synths without becoming a bit of a nerd for patch cables.We knew we wanted the braided, high-quality kind that won't suffer from the saggy plastic feel we had come to expect. And we knew we wanted them pitch black to match our preference for a fine cup of coffee.So we found a manufacturer that could make them to our exact specifications, and had them send us a big box of delicious cables.We think they turned out great, so we'll make them available to you as well.Each set contains five 90 cm cables, an excellent choice for patching across rows in a system and within the same rack.
€14.90*
Making Sound Machines - MIDI Adapter
only 1 left
DIN to TRS 3.5mm, Type AThis adapter allows you to use a standard DIN MIDI cable with instruments that come with a MIDI TRS port.Please note that multiple standards exist. This adapter is Type A, compatible with devices from Making Sound Machines, Plinky, Make Noise, ADDAC, Dreadbox, Intellijel, Teenage Engineering, Twisted Electrons, Akai, Korg, Elektron and others.We have included a wiring diagram for your reference with the pictures on this page. You can find a simplified guide to TRS MIDI and a list of devices at Minimidi.world.
€6.50*