EUCLIDEAN is an algorithmic gate sequencer for the Eurorack format based on the euclidean algorithm. It is based on the euclidean DIY module developed by Music Thing Modular’s Tom Whitwell, and he has blessed this module with his approval.

The module consists of three channels of sixteen step sequences, and each channel can be set to any length, density and offset between one an sixteen. You get clear visual feedback due to the 8×8 matrix LED display, and setting each channel is easily done with the three encoders.

EUCLIDEAN is perfect for creating polymetric rhythms, odd time signature sequencing or clock division with a twist.

The module runs an internal clock set to 120 BPM by default, but can be triggered and reset externally. Each sequencer channel has a dedicated trigger output. In addition, the first channel has an inverted output that outputs triggers on every offbeat.

Trigger output voltage: 5V

Current draw +12 V [mA]: 62
Current draw -12 V [mA]: 0
Current draw +5 V [mA]: 0
Depth [mm]: 30
Width [HP]: 8
Panel: Silver Alu

This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only THT parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. check this link.
DIY level: medium.

ODDS is a generative melodic looping sequencer for the Eurorack format. It generates notes based on random probability, and it is designed to be as musical as possible while maintaining a direct and minimalistic interface. It enables you to set a probability to generate random notes within a given octave, scale and chord structure.

The module can via the LOOP switch either be set to indefinitely generate random notes, or be set to loop the last up to 64 steps. The V/OCT input acts as transposition within the chosen scale, making it easy to create chord progressions.

Gate output voltage: 5 V
CV output voltage range: 0-7 V

Current draw +12 V [mA]: 31
Current draw -12 V [mA]: 5
Current draw +5 V [mA]: 0
Depth [mm]: 25
Width [HP]: 4
Panel: Silver Alu

This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the link.
DIY level: medium.

Panning Stereo Mixer. ST MIXER is effectively a five channel stereo mixer with a really good sounding headphone amplifier built in. It is designed to be the final output module of a small portable system that you want to use with headphones or for recording via 1/8 inch stereo jack cable to a portable recorder.

The module consists of three mono channels with level and panning control and one stereo channel with level control and separate inputs for left and right. The stereo headphone output also has level control.

ST MIXER is perfect for a starter system with a couple of synth voices and a stereo effect. The headphone output can drive most headphones quite well and also doubles as a recording output to connect to for instance a Zoom recorder.

Headphone output power: 6,4 mW @ 73 ohms

Current draw +12 V [mA]: 27
Current draw -12 V [mA]: 27
Current draw +5 V [mA]: 0
Depth [mm]: 26
Width [HP]: 8
Panel: Silver Alu

This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only THT parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. check this link.
DIY level: medium.