Skorn da Bask is a expert for creating Drones. Its composed 3 analog Oszillator and a low pass filter. The VCOs can not only be used to generate audio signals, but for modulating the VCF’s cutoff frequency as well. Check a video here.

Features
• 3 analog OSCillators/LFOs
• 1 analog Low Pass Filter (24dB)
• Osc 1, 2, 3 CV Modulation input
• Filter Audio Input
• Filter Modulation input

Power: 25mA @ 12V, 10mA @ -12V
Width: 16 HP
Depth: 32mm

Panel: Silver Alu

This is a Do-It-Yourself kit, not an assembled module. SMD parts are pre-soldered, THT parts to solder.

Building instructions can be downloaded here.

DIY level: medium.

The two fuzzes share the same controls. The Fuzzes and EQ are slightly differents (great for strereo). You can output the Stereo signal by plugin a stereo cable or you can output a mono signal: Fuzz1 - clock wise or Fuzz2 - counterclock wise, or a mix of the 2 fuzzes by turning the morphing pot. There is a video here.

Features

• Selected Silicon transistors

• Mono input

• Stereo output - with stereo cable

• Mono morphing output - with mono cable

• Feedback (with cv control)

• EQ (low high)

• Morphing (with cv control) Clock wise Fuzz1, counter clock wise Fuzz2

• Input Volume

• Gain

• Stupid Breton name

Power: 19mA @ 12V, 17mA @ -12V

Width: 8 HP

Depth: 32mm

Panel: Black Alu

This is a Do-It-Yourself kit, not an assembled module. SMD parts are pre-soldered, THT parts to solder.

Building instructions can be downloaded here.

DIY level: medium.

Sonveskan is a three-channel mixer, which was built using discrete components like germanium transistors.
Each audio path comes equipped with a dual gain stage, voltage controlled feedback, a mute switch and a direct output.

Features
• 3 Discrete Preamps
• 3 Channels Mixer
• 3 CV Controlled FeedBacks
• EQ High/Low
• Direct Out / Mute

Power: 0mA @ 12V, 10mA @ -12V
Width: 16 HP
Depth: 32mm

Panel: Black Alu

This is a Do-It-Yourself kit, not an assembled module. SMD parts are pre-soldered, THT parts to solder.

Building instructions can be downloaded here.

DIY level: medium.

Strakal Brulu is a gread sounding Germanium Fuzz Module. Very characteristic for the module´s sound if the feedback that is coupled to the feedback. The more fuzz, the more feedback.  The Strakal Brulu 2 can get pretty nasty and it screams a lot at high fuzz settings and low input level. The fuzz amount can be voltage controlled, with an inverse attenuator.

Features
• 2 NOS Germanium Transistors
• Cv controled by vactrol
• Classic Fuzz sound for mudular levels
• Feedback screaming

Power: 10mA @ 12V, 10mA @ -12V
Width: 8 HP
Depth: 32mm

Panel: Silver Alu

This is a Do-It-Yourself kit, not an assembled module. SMD parts are pre-soldered, THT parts to solder.

Building instructions can be downloaded here.

DIY level: medium.

BLACK PANEL!

Strakal Orsel is a powerful, hand-wired tube distortion module. Crude VCA, Noise Generator and Oscillator.

Features
• Tube sound
• Compatible with 6j1P, 5654, 6AK5, EF95 tubes
• Hand-wired, Boutique quality, Made in Plougastel-Daoulas

Power: 5mA @ 12V, 5mA @ -12V, 350mA @ +5V
Width: 12 HP
Depth: 32mm

The kit come with 2 x Russian Tubes – NOS – 6j1P

This is a Do-It-Yourself kit, not an assembled module. SMD parts are pre-soldered, rest to solder.

Building instructions can be downloaded here.

DIY level: medium.

Ar Merc'het Brao is a nice sounding Dual Filter Overdrive. It can be used with a stereo signal or with two mono signals. The module is modular as well as guitar friendly. The filters are resonant with a slope of -12dB. A switch allows to switch each filter from LowPass to HighPass. The filter cutoffs are voltage controlled thanks to dedicated CV inputs. Check this demo video here and nice Ambient video by Hainbach here.

Features

• 2 X Resonant 12 dB slope Filter (High Pass/Low Pass)
• 2 X Classic Overdrives
• Filter Cutoff CV inputs
• Global controls for Cutoff and Resonance
• Stereo and double mono use
• Modular and Guitar friendly
• Anodized & serigraphied 2mm aluminium panel

Power: 20mA @ 12V, 20mA @ -12V
Width: 16 HP
Depth: 25mm

This is a Do-It-Yourself kit, not an assembled module. All SMD Parts are pre-populated.

Building instructions can be downloaded here.

DIY level: medium.

This is a Standalone Guitar Pedal enclosure.

Ar Merc'het Brao is a nice sounding Dual Filter Overdrive. It can be used with a stereo signal or with two mono signals. The module is modular as well as guitar friendly. The filters are resonant with a slope of -12dB. A switch allows to switch each filter from LowPass to HighPass.  The filter cutoffs are voltage controlled thanks to dedicated CV inputs.

Features

• 2 X Resonant 12 dB slope Filter (High Pass/Low Pass)
• 2 X Classic Overdrives
• Filter Cutoff CV inputs
• Global controls for Cutoff and Resonance
• Stereo and double mono use
• Modular and Guitar friendly
• Anodized & serigraphied 2mm aluminium panel

Power: +12V/+9V
Enclosure Size: 1590BB

This is a Do-It-Yourself kit, not an assembled module. All SMD Parts are pre-populated.

Building instructions can be downloaded here.

DIY level: medium.