Drums are the heart! AD110 is a 6-voice analog drum module inspired by the vintage Japanese machines with the same number. The module produces 6 voices; kick drum, snare drum, hand clap, closed hi-hat, open hi-hat, and ride cymbal, all of which are contained in a very compact 16 HP Eurorack module!

Note #1: Knob colors might differ from pictures, currently not all parts are available from time to time.
Note #2: Recently we had problems to get some of the Alpha pots and got replacements without the side-lugs. If you should have these included: make sure to put all pots and audio connectors in place, add the front panel, put nuts on. Then solder them from the back. This is to make sure, all is perfectly aligned in terms of height.

Note #3: KIts packed according to revision AK

Features
• Faithful recreation of all 6 DR110 voices outputted in Eurorack signal format.
• Additional tone adjustments beyond the standard DR110 settings: Kick pitch/resonance, Snare pitch/decay, Cymbal decay, and Clap spread/reverb.
• Individual outs + mix out with accent input.
• All through-hole parts (DIY Version) and no rare parts.

Power: 75mA @ 12V, 35mA @ -12V
Width: 16 HP
Depth: 37 mm

Panel: Black Alu

This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Building instructions can be downloaded here.
DIY level: advanced. Only for experienced DIYers, it's very complex kits.

TZ0 Thru-Zero VCO. Classic analog sound with TZFM! TZ0 is an analog Voltage Controlled Oscillator module in Eurorack format. TZ0 is a triangle-core VCO which is capable of thru-zero linear FM. This VCO has been engineered for extremely good 1 V/oct response over a large tuning range and great thermal stability.

Note #1: Knob colors might differ from pictures, currently not all parts are available from time to time.
Note #2: Recently we had problems to get some of the Alpha pots and got replacements without the side-lugs. If you should have these included: make sure to put all pots and audio connectors in place, add the front panel, put nuts on. Then solder them from the back. This is to make sure, all is perfectly aligned in terms of height.

Note #3: KIts packed according to revision AG

Features
• Thru-Zero Linear Frequency Modulation.
• 5 wave shapes: Sine, Triangle, Sawtooth, Square, & Pulse.
• Extremely good tuning linearity.
• Built-in high frequency compensation.
• Hard Sync input (reset type).
• Built in VCA for modulating Linear FM signal with an envelope.
• Robust old-school design with mostly through hole components, large copper traces, and easily obtainable replacement parts.

Power: 75mA @ 12V, 60mA @ -12V
Width: 12 HP
Depth: 37 mm

Panel: Black Alu

This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Building instructions can be downloaded here.
DIY level: advanced. Only for experienced DIYers, it's very complex kits.

2VL1 is a 12HP Eurorack module that offers 2 independent, syncable VCOs and 1 free-running LFO in one compact package. This module uses no rare parts and is an easy to medium DIY build with through hole soldering. This DIY module consists of an assembly of 3 PCBs and robust black anodized 2mm thick front panel with crisp laser engraved graphics.

Note #1: Knob colors might differ from pictures, currently not all parts are available from time to time.
Note #2: Recently we had problems to get some of the Alpha pots and got replacements without the side-lugs. If you should have these included: make sure to put all pots and audio connectors in place, add the front panel, put nuts on. Then solder them from the back. This is to make sure, all is perfectly aligned in terms of height.

Note #3: KIts packed according to revision 07

Features
• One VCO with Saw/Pulse/Triangle waves, another with Saw/Pulse
• One free-running LFO with square and triangle 20s (50mHz)-30Hz
• VCO B syncable to VCO A or external signal
• High thermal stability
• Extremely good tracking (<4 cents over 7+ octaves typical)
• Robust old-school design with all through hole components, large copper traces, and easily obtainable replacement parts.

Power: 55mA @ 12V, 55mA @ -12V
Width: 12 HP
Depth: 37 mm

Panel: Black Alu

This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Building instructions can be downloaded here.
DIY level: advanced. Only for experienced DIYers, it's very complex kits.

Bass and more! B2 contains everything you need to create deep, thumping kick drums or cutting bass lines in one compact 14HP unit: A 1 V/Oct VCO with 4 waveforms, a 3-way waveform mixer with sub-octave sine wave, 2 fast, switchable AR/AD envelope generators, a high quality VCA, and a multi-mode VCF for additional tone shaping!

Note #1: Knob colors might differ from pictures, currently not all parts are available from time to time.

Note #2: KIts packed according to revision AE

New features of B2 from B1:
• New reset/trigger circuit and faster minimum attack times (~25uS) without artifacts
• Sub-octave sine
• Wave select saw or 2x saw
• New VCF with LP/BP/HP selection
• Stable voltage references for VCO stability under power supply fluctuations
• All OTAs are LM13700 for easy parts sourcing

Power: 100mA @ 12V, 80mA @ -12V
Width: 14 HP
Depth: 37 mm

Panel: Black Alu

This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Building instructions can be downloaded here.
DIY level: advanced. Only for experienced DIYers, it's very complex kits.