Thonkiconn is the standard audio connector in Eurorack. 3,5mm mono connector with switching function for PCB mounting. Dimensions: total body height 10mm, thread 4,5mm, needs a 6mm hole in the panel. We've got a nice set of nut driver tools for the most common Eurorack nuts here.

• Knurled or hex nuts
• Bags of 20 or 50 available

If you need more than one, please increase the number during checkout.

PJ301CM is a 3,5mm stereo connector, which is quite polular and used in some designs recently. Please check the measurements on the picture.  We've got a nice set of nut driver tools for the most common Eurorack nuts here.

• Knurled, hex or smooth nuts available
• Bags of 20 or 50 available

If you need more than one, please increase the number during checkout.

Black M6 knurled nuts for use with Thonkiconns and similar 3,5mm audio connectors. Bags a 50 pcs.

If you need more than one, please increase the number during checkout.

Stereo version of the Thonkiconn. No switching function like the mono one. It has the same form-factor and height as the mono version, except it is 1mm more wide. We've got a nice set of nut driver tools for the most common Eurorack nuts here.

• Knurled or hex nuts
• Bags of 20 or 50 available

If you need more than one, please increase the number during checkout.

PJ398S-BM is the new version of the famous PJ301BM connector with some little improvements (fully compliant). Also known as Erthenvar jack. 3,5mm mono connector with switching function for PCB mounting. Dimensions: total body height 10mm, thread 4,5mm, needs a 6mm hole in the panel. We've got a nice set of nut driver tools for the most common Eurorack nuts here.

• Knurled or hex nuts
• Bags of 20 or 50 available

If you need more than one, please increase the number during checkout.

A very reliable 6,3mm TRS (stereo) connector with switching function. Slimline version, very useful when space is limited, for example in DIY pedals or synths. PCB mount.

If you need more than one, please increase the number during checkout.

Cliff FC681374V - 3,5mm TRS (stereo) connector with switching function for the tip contact. Solder lugs with hole. Dimensions: with 9mm, height 10,5mm, lenth (body) 13mm. Needs an 8mm hole. We've got a nice set of nut driver tools for the most common Eurorack nuts here.

If you need more than one, please increase the number during checkout.

Cliff S6/BB PC (CL1384) 3,5mm mono connector for Doepfer replacement for PCB-mount. With switching function, print contacts. This replaces the original Doepfer ones and they are definitely less wobbly than the really old Doepfer ones! Nice feeling.

If you need more than one, please increase the number during checkout.

Cliff S6/BB (CL1382) 3,5mm mono connector for Doepfer replacement with solder lugs. With switching function, print contacts. This replaces the original Doepfer ones and they are definitely less wobbly than the really old Doepfer ones! Nice feeling.

If you need more than one, please increase the number during checkout.

Power supply connector by Lumberg. Super reliable and useful when space is limited. Solder lugs with hole, plastic body. Works with all connectors specified as: opening Ø 5,5mm / pin Ø 2,1mm.

If you need more than one, please increase the number during checkout.

Reliable miniatur SPDT on/on switch with solder lugs. We use them ourselves for our builds. Dimensions: width 13mm / depth 8mm / height 10mm.

If you need more than one, please increase the number during checkout.

High quality subminiatur SPDT switch on/on, made by Salecom. PCB mount, no thread. Dimensions: width 8mm / depth 5mm / height 8,5mm. Height matches with our potentiometers.

If you need more than one, please increase the number during checkout.

High quality subminiatur SPDT switch on/on, made by Salecom. Solder lugs, chassis mount. Dimensions: width 8mm / depth 5mm / height 8,5mm. Max 3A at 128V. Electrical life = about 30.000 cycles.

If you need more than one, please increase the number during checkout.

High quality subminiatur SPDT switch on/off/on, made by Salecom. PCB mount, no thread. Dimensions: width 8mm / depth 5mm / height 8,5mm. Height matches with our potentiometers. Max 3A at 128V. Electrical life = about 30.000 cycles.

If you need more than one, please increase the number during checkout.

Quality Miniatur (bigger than Subminiatur!) switch by Dailywell. Various types, please check pics and select by the drop down menu.
Body Length: 12.7mm
Body Width: 6.86mm (11.43mm DPDT)
Body Height: 8.89mm
Pin Size (Print Contacts): 1.27mmx0.76mmx5.10mm // Pin Size (Solder Lugs): 2.03mmx0.76mmx3.96mm
Pin Spacing: 4.70mm
Mounting Hole: 6.35mm diameter

If you need more than one, please increase the number during checkout.