H11F1 Optocoupler

The H11F series consists of a Gallium-Aluminum-Arsenide IRED emitting diode coupled to a symmetrical bilateral silicon photo- detector. The detector is electrically isolated from the input and performs like an ideal isolated FET designed for distortion-free control of low level AC and DC analog signals. Datasheet can be found here. Can be used as:

  • isolated variable resistor
  • gain control
  • CV & audio applications

If you need more than one, please increase the number during checkout.

H11F1 Optocoupler

2,99 €

  • 0,01 kg
  • Available
  • Ships within 3-5 days1

Thonkiconn (Mono)

Thonkiconn is the standard audio connector in Eurorack. 3,5mm mono connector with switching function for PCB mounting. Dimensions: total body height 10mm, thread 4,5mm, needs a 6mm hole in the panel. We've got a nice set of nut driver tools for the most common Eurorack nuts here.

  • Knurled or hex nuts
  • Bags of 20 or 50 available

If you need more than one, please increase the number during checkout.

Thonkiconn (Mono)

0,60 €

  • 0,01 kg
  • Available
  • Ships within 3-5 days1

Thonkiconn (Stereo)

Stereo version of the Thonkiconn. No switching function like the mono one. It has the same form-factor and height as the mono version, except it is 1mm more wide. We've got a nice set of nut driver tools for the most common Eurorack nuts here.

  • Knurled or hex nuts
  • Bags of 20 or 50 available

If you need more than one, please increase the number during checkout.

Thonkiconn (Stereo)

0,60 €

  • 0,01 kg
  • Available
  • Ships within 3-5 days1

PJ301BM Connector

PJ398S-BM is the new version of the famous PJ301BM connector with some little improvements (fully compliant). Also known as Erthenvar jack. 3,5mm mono connector with switching function for PCB mounting. Dimensions: total body height 10mm, thread 4,5mm, needs a 6mm hole in the panel. We've got a nice set of nut driver tools for the most common Eurorack nuts here.

  • Knurled or hex nuts
  • Bags of 20 or 50 available

If you need more than one, please increase the number during checkout.

PJ301BM Connector

0,60 €

  • 0,01 kg
  • Available
  • Ships within 3-5 days1

6,3mm TRS Connector

A very reliable 6,3mm TRS (stereo) connector with switching function. Slimline version, very useful when space is limited, for example in DIY pedals or synths. PCB mount.

If you need more than one, please increase the number during checkout.

1,00 €

0,70 €

  • 0,01 kg
  • Available
  • Ships within 3-5 days1

3,5mm TRS connector (Cliff FC681374V)

Cliff FC681374V - 3,5mm TRS (stereo) connector with switching function for the tip contact. Solder lugs with hole. Dimensions: with 9mm, height 10,5mm, lenth (body) 13mm. Needs an 8mm hole. We've got a nice set of nut driver tools for the most common Eurorack nuts here.

If you need more than one, please increase the number during checkout.

3,5mm TRS connector (Cliff FC681374V)

0,65 €

  • 0,01 kg
  • Available
  • Ships within 3-5 days1

Cliff S6/BB PC (CL1384) PC-Mount

Cliff S6/BB PC (CL1384) 3,5mm mono connector for Doepfer replacement for PCB-mount. With switching function, print contacts. This replaces the original Doepfer ones and they are definitely less wobbly than the really old Doepfer ones! Nice feeling.

If you need more than one, please increase the number during checkout.

Cliff S6/BB PC (CL1384) PC-Mount

1,10 €

  • 0,01 kg
  • Available
  • Ships within 3-5 days1

Cliff S6/BB (CL1382) Solder-Lugs

Cliff S6/BB (CL1382) 3,5mm mono connector for Doepfer replacement with solder lugs. With switching function, print contacts. This replaces the original Doepfer ones and they are definitely less wobbly than the really old Doepfer ones! Nice feeling.

If you need more than one, please increase the number during checkout.

Cliff S6/BB (CL1382) Solder-Lugs

1,10 €

  • 0,01 kg
  • Available
  • Ships within 3-5 days1

Song Huei 9mm Tall Trimmer Pot

The usual Song Huei R0904N 9mm snap-in trimmer potentiometer with knurled 17mm long shaft.  Linear (B) and logarithmic (A) taper, black, blue or red shaft. Rotation angle 280°. 6mm diameter round, knurled shaft with white indicator line. If you need more than one, please increase the number during checkout.

Song Huei 9mm Tall Trimmer Pot

0,99 €

  • 0,01 kg
  • Available
  • Ships within 3-5 days1

Potentiometer 2k Ohm

High quality Song Huei potentiometer 2kΩ, linear taper, horizontal version. Rotation angle 300°. 6mm half flat shaft for push-on or knobs with set-screw.

If you need more than one, please increase the number during checkout.

Potentiometer 2k Ohm
1,00 €

0,95 €

  • 0,01 kg
  • Available
  • Ships within 3-5 days1

Potentiometer 10k Ohm

High quality Song Huei potentiometer 10kΩ, linear taper, horizontal version. Rotation angle 300°. 6mm half flat shaft for push-on or knobs with set-screw.

If you need more than one, please increase the number during checkout.

Potentiometer 10k Ohm
1,00 €

0,95 €

  • 0,01 kg
  • Available
  • Ships within 3-5 days1

Potentiometer 100k Ohm

High quality Song Huei potentiometer 100kΩ, linear taper, horizontal version. Rotation angle 300°. 6mm half flat shaft for push-on or knobs with set-screw.

If you need more than one, please increase the number during checkout.

Potentiometer 100k Ohm
1,00 €

0,95 €

  • 0,01 kg
  • Sold out at the moment

Potentiometer 500k Ohm

High quality Song Huei potentiometer 500kΩ, linear taper, horizontal version. Rotation angle 300°. 6mm half flat shaft for push-on or knobs with set-screw.

If you need more than one, please increase the number during checkout.

Potentiometer 500k Ohm
1,00 €

0,95 €

  • 0,01 kg
  • Available
  • Ships within 3-5 days1

Alps 10k linear

Alps RK09 (RK09L1140A66) 10kΩ, linear taper. The footprint fits for the Mulable Instruments clones, but the thread has a bigger diameter than the original MI, please check your front panels first or be ready to drill their holes bigger! Works for knobs with 6mm half flat shaft or knobs with set-screw. They have a relative short shaft, which is good for many knobs. If you have really high knobs with set screw it might be a problem, check the data sheet before you buy. www.alps.com/prod/info/E/HTML/Potentiometer/RotaryPotentiometers/RK09L/RK09L1140A66.html

If you need more than one package, please increase the number during checkout.

Alps RK09L1140A66

0,75 €

  • 0,01 kg
  • Sold out at the moment

Knob - Soft Grip

Soft grip knob (push on) for 6mm half flat shaft (D-shaft), black/light grey, you can use it with our potentometers. They fit on the original pots used for the Mutable Instruments modules and have the same size as the bigger ones for example on Clouds or Ripples. With black aluminium inlay (has to be fixed by you with a drop of glue).

If you need more than one, please increase the number during checkout.

Knob - Soft Grip

0,95 €

  • 0,01 kg
  • Sold out at the moment

SPDT Switch on/on (Miniatur)

Reliable miniatur SPDT on/on switch with solder lugs. We use them ourselves for our builds. Dimensions: width 13mm / depth 8mm / height 10mm.

If you need more than one, please increase the number during checkout.

Miniatur SPDT on/on

0,99 €

  • 0,01 kg
  • Available
  • Ships within 3-5 days1

Salecom SPDT on/on Sub-Mini (PCB mount/no thread)

High quality subminiatur SPDT switch on/on, made by Salecom. PCB mount, no thread. Dimensions: width 8mm / depth 5mm / height 8,5mm. Height matches with our potentiometers.

If you need more than one, please increase the number during checkout.

Salecom SPDT on/on Sub-Mini (PCB mount/no thread)

1,59 €

  • 0,01 kg
  • Sold out at the moment

Salecom SPDT on/on Sub-Mini (lugs & thread)

High quality subminiatur SPDT switch on/on, made by Salecom. Solder lugs, chassis mount. Dimensions: width 8mm / depth 5mm / height 8,5mm. Max 3A at 128V. Electrical life = about 30.000 cycles.

If you need more than one, please increase the number during checkout.

Salecom SPDT on/on Sub-Mini (lugs & thread)

1,59 €

  • 0,01 kg
  • Available
  • Ships within 3-5 days1

Salecom SPDT on/off/on (Sub-Mini)

High quality subminiatur SPDT switch on/off/on, made by Salecom. PCB mount, no thread. Dimensions: width 8mm / depth 5mm / height 8,5mm. Height matches with our potentiometers. Max 3A at 128V. Electrical life = about 30.000 cycles.

If you need more than one, please increase the number during checkout.

Subminiatur SPDT on/off/on (print/no thread)
2,10 €

1,99 €

  • 0,01 kg
  • Sold out at the moment

Power supply connector

Power supply connector by Lumberg. Super reliable and useful when space is limited. Solder lugs with hole, plastic body. Works with all connectors specified as: opening Ø 5,5mm / pin Ø 2,1mm.

If you need more than one, please increase the number during checkout.

0,90 €

  • 0,01 kg
  • Available
  • Ships within 3-5 days1

Piezoceramic Transducer

Piezoceramic transducer by Murata. You can use it to build your own contact microphone or pressure sensor for your modular synth etc. ø 27mm, impedance ~200Ω, resonance frequency 4,6 ± 0.5 kHz. Among many, we picked this one, as it sounds crisp and beefy. Make sure, to have a look at our industrial quality adhesive dots for fixing them on any surfaces.

If you need more than one, please increase the number during checkout.

Piezoceramic Transducer

0,90 €

  • 0,01 kg
  • Available
  • Ships within 3-5 days1