Mutated Plaits. PCB only. We might have panels in the panel section. Check the DIY infos about this projects here.
All Mutated modules are designed by Olivier Gillet, and are released under CC-BY-SA license.
9,30 €
incl. VAT, shipping costs apply
Free shipping to the following countries: Show more Show less
Mutated Braids. PCB only. We might have panels in the panel section. Check the DIY infos about this projects here.
All Mutated modules are designed by Olivier Gillet, and are released under CC-BY-SA license.
8,00 €
incl. VAT, shipping costs apply
Free shipping to the following countries: Show more Show less
Mutated Clouds. PCB only. We might have panels in the panel section. Check the DIY infos about this projects here.
All Mutated modules are designed by Olivier Gillet, and are released under CC-BY-SA license.
9,00 €
incl. VAT, shipping costs apply
Free shipping to the following countries: Show more Show less
Mutated Elements. PCB only. We might have panels in the panel section. Check the DIY infos about this projects here.
All Mutated modules are designed by Olivier Gillet, and are released under CC-BY-SA license.
11,00 €
incl. VAT, shipping costs apply
Free shipping to the following countries: Show more Show less
Mutated Rings. PCB only. We might have panels in the panel section. Check the DIY infos about this projects here.
All Mutated modules are designed by Olivier Gillet, and are released under CC-BY-SA license.
8,00 €
incl. VAT, shipping costs apply
Free shipping to the following countries: Show more Show less
Mutated Ripples. PCB only. We might have panels in the panel section. Check the DIY infos about this projects here.
All Mutated modules are designed by Olivier Gillet, and are released under CC-BY-SA license.
8,00 €
incl. VAT, shipping costs apply
Free shipping to the following countries: Show more Show less
Mutated Peaks. PCB only. We might have panels in the panel section. Check the DIY infos about this projects here.
All Mutated modules are designed by Olivier Gillet, and are released under CC-BY-SA license.
8,00 €
incl. VAT, shipping costs apply
Free shipping to the following countries: Show more Show less
Mutated Tides. PCB only. We might have panels in the panel section. Check the DIY infos about this projects here.
All Mutated modules are designed by Olivier Gillet, and are released under CC-BY-SA license.
8,00 €
incl. VAT, shipping costs apply
Free shipping to the following countries: Show more Show less
Mutated Streams. PCB only. We might have panels in the panel section. Check the DIY infos about this projects here.
All Mutated modules are designed by Olivier Gillet, and are released under CC-BY-SA license.
8,00 €
incl. VAT, shipping costs apply
Free shipping to the following countries: Show more Show less
Worng LRMSMSLR. PCB only. Check demos and the DIY infos about this projects here on Muffwiggler.
8,00 €
incl. VAT, shipping costs apply
Free shipping to the following countries: Show more Show less
XIIO is a touch plate keyboard based around the MPR121 capacitive touch sensor controller. It’s tuning and output is quantised to semitones. The module has no pressure output but it’s equipped with two auxiliary switches, which can bring some additional movement to your composition. XIIO can save 15 presets, which includes note layout and all the parameters under settings. Other features: glide, octave plates, arpeggiator. A header on the back allows you to chain multiple units for even more inputs. FR4 panel + 2 PCB. Panel/PCB only, you have to source your own parts. Check the DIY documentation, Mouser cart etc for this projects here.
Width: 16 HP
Depth: 30mm
Power consumption: +12V: 50mA, -12V: 5mA
DIY level: medium. The kit contains SMD parts!
26,90 €
incl. VAT, shipping costs apply
Free shipping to the following countries: Show more Show less
6MIX is a six channel DC coupled utility mixer, for mixing audio or CV signals. It is split in two groups of three channels, both with their respective mute buttons. Group 1 is normaled to group 2 so you can use it as a 1x6 channel mixer. A header on the back allows you to chain multiple units for even more inputs. FR4 panel + 2 PCB. Panel/PCB only, you have to source your own parts. Check the DIY documentation, Mouser cart etc for this projects here.
Width: 6 HP
Depth: 20mm
Power consumption: +12V: 43mA, -12V: 5mA
DIY level: medium. The kit contains SMD parts!
21,50 €
incl. VAT, shipping costs apply
Free shipping to the following countries: Show more Show less
ATOM (v1.2) is a smaller redesign of the Mutable Instruments Elements module by Olivier Gillet. CC-by-SA Olivier Gillet. FR4 panel + 2 PCB. Panel/PCB only, you have to source your own parts. Check the DIY documentation, Mouser cart etc. for this projects here.
Width: 18 HP
Depth: 33mm
Power consumption: +12V: 130mA, -12V: 10mA
DIY level: advanced. The kit contains SMD parts!
26,50 €
incl. VAT, shipping costs apply
Free shipping to the following countries: Show more Show less
Knit (v1) is a smaller redesign of the Mutable Instruments Plaits module by Olivier Gillet. CC-by-SA Olivier Gillet. FR4 panel + 2 PCB. Panel/PCB only, you have to source your own parts. Check the DIY documentation, Mouser cart etc. for this projects here.
Width: 6 HP
Depth: 30mm
Power consumption: +12V: 50mA, -12V: 5mA
DIY level: advanced. The kit contains SMD parts!
24,50 €
incl. VAT, shipping costs apply
Free shipping to the following countries: Show more Show less
DVCA (v1.2) is a dual VCA based on the Mutable Instruments Veils. It features two separate voltage controlled amplifiers, both with a gain and a response curve potentiometer, that is variable from linear to exponential. The outputs are normaled, so when no patch cable is present on output 1, output 2 will contain both signals, allowing the module to be used as a mixer. Several DVCAs can be daisy-chained for voltage controlled mixer operation. Check the DIY documentation, Mouser cart etc. for this projects here. FR4 panel + PCB. Panel/PCB only, you have to source your own parts.
Width: 4 HP
Depth: 20mm
Power consumption: +12V: 17mA, -12V: 17mA
DIY level: advanced. The kit contains SMD parts!
17,50 €
incl. VAT, shipping costs apply
Free shipping to the following countries: Show more Show less
KNOT (v1.0) is a smaller redesign of the now discontinued Mutable Instruments Braids module designed by Olivier Gillet. CC-by-SA Olivier Gillet. Check the DIY documentation, Mouser cart etc. for this projects here. FR4 panel + PCB. Panel/PCB only, you have to source your own parts.
Width: 8 HP
Depth: 25mm
Power consumption: +12V: 100mA, -12V: 15mA
DIY level: advanced. The kit contains SMD parts!
23,00 €
incl. VAT, shipping costs apply
Free shipping to the following countries: Show more Show less
SMOG (v1.1) is a smaller redesign of the now discontinued Mutable Instruments Clouds module designed by Olivier Gillet. CC-by-SA Olivier Gillet. Check the DIY documentation, Mouser cart etc. for this projects here. FR4 panel + PCB. Panel/PCB only, you have to source your own parts.
Width: 8 HP
Depth: 30mm
Power consumption: +12V: 120mA, -12V: 10mA
DIY level: advanced. The kit contains SMD parts!
24,50 €
incl. VAT, shipping costs apply
Free shipping to the following countries: Show more Show less
BANK (v1.0) consists of 12 band-pass, one high-pass and one low-pass filter to cover the full audio range. The circuit is based on the Yusynth FFB, but it’s packed much smaller than other versions of this module. There are two inputs with different gain levels that go through an attenuator pot for input level adjust. All twelve bandpass filters feature a -12db/octave slope, while the low-pass and the high-pass filters feature a -24db/octave slope. All filters are resonant and their gain is easily adjustable from minimum (completely silent) to maximum. There are three outputs: one output for odd cells (dotted pots), one output for even cells (pots with solid line around them) and a mix output for all cells. This is an essential module for sound sculpting, it works like a graphic EQ, but at the same time there are some differences which lie mainly in the higher resonance, steeper bandpass slopes and the ability to completely mute the bands.
Check the DIY documentation, Mouser cart etc. for this projects here. FR4 panel + PCB. Panel/PCB only, you have to source your own parts.
Width: 8 HP
Depth: 33mm
Power consumption: +12V: 70mA, -12V: 70mA
DIY level: advanced. The kit contains SMD parts!
26,50 €
incl. VAT, shipping costs apply
Free shipping to the following countries: Show more Show less
ROT8 (v1.4) is an 8 step analog CV sequencer with a digital heart. Although it can be used as a very simple sequencer, it holds some tricks up it’s sleeves. It features an analog slew on the output path, CV input for direction and an assignable CV input and an assignable potentiometer for quick parameter editing. CV and the potentiometer can be assigned to: current step, pattern length, gate length, and pause. There is an option to insert held steps, where the sequencer halts and outputs the same CV and holds the gate open, allowing you to create longer steps. In tune mode the sequencer stops listening to the clock input and you can select the current step with the step buttons, allowing you to easily tune knobs to the desired level. 5V or 10V output levels are selectable on the back via a jumper.
Check the DIY documentation, Mouser cart etc. for this projects here. FR4 panel + PCB. Panel/PCB only, you have to source your own parts.
Width: 16 HP
Depth: 20mm
Power consumption: +12V: 106mA, -12V: 6mA
DIY level: advanced. The kit contains SMD parts!
28,00 €
incl. VAT, shipping costs apply
Free shipping to the following countries: Show more Show less
DIST (v1.1) is a very simple diode distortion module with two selectable distortion circuits. You are free to experiment and install the diode pairs of your choice for different flavours of distortion. Based on the MXR distortion+ / Hexinverter Batteryacid v1.0. Check the DIY documentation, Mouser cart etc. for this projects here. FR4 panel + PCB. Panel/PCB only, you have to source your own parts.
Width: 4 HP
Depth: 20mm
Power consumption: +12V: 18mA, -12V: 0mA
DIY level: medium. The kit contains SMD parts!
17,50 €
incl. VAT, shipping costs apply
Free shipping to the following countries: Show more Show less
KLIK (PCB v1.7) is a small and simple 16 step trigger sequencer with an intuitive interface. It features a 4x4 LED matrix as the interface which is easily navigated with the encoder and it's pushbutton. This interface enables a simple menu, which allows you to access several features, like euclidean mode, sequence length, direction, and different ways of random pattern generation. Triggered random pattern generation is available through the reset jack. For more information, please read the manual!
Check the DIY documentation, Mouser cart etc. for this projects here. FR4 panel + PCB. Panel/PCB only, you have to source your own parts.
Width: 4 HP
Depth: 20mm
Power consumption: +12V: 100mA, -12V: 0mA
DIY level: medium. The kit contains SMD parts!
18,80 €
incl. VAT, shipping costs apply
Free shipping to the following countries: Show more Show less
Connect yourself: Look for us on Facebook, Twitter, & Instagram!
Exploding Shed - DIY kits, modules & parts
Based in Leipzig, Germany
Shipping to Germany & EU, no USA
www.exploding-shed.com | shop@exploding-shed.com