T-Shirt - 'This is not a fucking Theremin'
LeafAudio Microphonic Soundbox T-Shirt: 'This is not a fucking Theremin'. White print on black shirt, quality: 195 g/m2, sizes S, M, L, XL.
Previously we printed only 10 copies and used the shirt on fair trades like Superbooth and Soundmit. But then many of you asked if this would be available. Now here is it!
16,90 €
incl. VAT, shipping costs apply
- 0,25 kg
- Available
- Ships within 3-5 days1
Tote Bag
Exploding Shed tote bag.
8,90 €
incl. VAT, shipping costs apply
- 0,1 kg
- Sold out at the moment
Drawstring Bag
Exploding Shed drawstring bag.
8,90 €
incl. VAT, shipping costs apply
- 0,1 kg
- Available
- Ships within 3-5 days1
4x Nut Tool Set
Forget scratched panels! This set includes tools for the 4 most common nuts in Eurorack!
1) Thonkiconn / Knobbicon 8mm knurled nut
2) Thonkiconn / Knobbicon 8mm hex nut
3) Befaco Bananuts / Cliff FC681374V / PJ3410 split nut
4) Doepfer (Cliff CL1384) hex nuts
20,00 €
incl. VAT, shipping costs apply
- 0,05 kg
- Available
- Ships within 3-5 days1
Wirecutter
A simple cheapo wirecutter. It's a must have for DIY! These are not the same quality as Knipex of course but only cost a part - it's kind of ok for entry level DIY.
6,50 €
incl. VAT, shipping costs apply
- 0,1 kg
- Available
- Ships within 3-5 days1
Mini Wirecutter
A simple mini wirecutter. Not the best but cheap. A wirecutter is a must have for DIY!
6,50 €
incl. VAT, shipping costs apply
- 0,1 kg
- Sold out at the moment
Mini Multimeter
A simple, small and affordable multi tool with all the neccesary modes you need when starting DIY. Later you can upgrade, but with this thing you can check your built for shorts, correct polarity and measure some voltages and resistances. Maybe most importantly it has a "beep" mode to check connections, traces, short circuits and so on.
DC Voltage: 200mV ~ 600V
AC Voltage: 200mV ~ 600V
DC Current: 200uA ~ 200mA
AC Current: 200uA ~ 200mA
Resistance: 200Ω ~ 20MΩ
Power: 3V CR2032 (NOT INCLUDED)
Size: 120 x 55 x 10mm
12,90 €
incl. VAT, shipping costs apply
- 0,12 kg
- Sold out at the moment
Stannol Kristall 611 - 0,7mm
Kristall 611 is the best solder we could currently find, so we would like to offer it to you for your DIY projects. We tested dozens of solder wires and this stood out, even on difficult surfaces. The diameter of 0,7mm makes it kind of universal. What Stannol say in their own words: The Soldering Wire Kristall 611 electronics soldering wire is based on a halogen-activated "No-Clean" flux. It has been developed for high requirements for conventional soldering and for soldering SMDs in industrial production and for repair and resoldering. The wire flux Kristall 611 is a well activated flux based on synthetic resins. it combines high activity and good flow characteristics in an outstanding way with small amounts of solid and electrically safe residues.
Here you'll find the data-sheet and savety
instructions.
Product Advantages
• Very low flux spitting
• Leaves just slightly coloured residues
• Fast soldering
• No-Clean residues
• Chemically modified resin, reducing the health risks of using rosin based fluxes
• Mild odour
11,90 €
incl. VAT, shipping costs apply
- 0,12 kg
- Available
- Ships within 3-5 days1
Gaffa - Pro-Quality - matte black
If you are a musician and play live, at one point you need Gaffa tape. We've been on tour for years and have seen it all. Greasy adhesive residues on cables and equipment and all that uglyness. Here is the real one:
- Professional Quality
- 50m lenth, 50mm width
- Matte black, doesn't reflect on stage
- Leaves no residues even after a couple of days or when it gets warm
- Very stable
14,00 €
incl. VAT, shipping costs apply
- 1 kg
- Available
- Ships within 3-5 days1
Gaffa - Standard Quality - Glossy Black
Standard quality Gaffa tape.
- Professional Quality
- 50 length, 50mm width
- Glossy black
8,90 €
incl. VAT, shipping costs apply
- 1 kg
- Available
- Ships within 3-5 days1
Labelling Tape - Pro-Quality - Matte White
Professional labelling tape. Super for labelling mixing desks, hard disks or any kind of equipment.
- Professional Quality
- 33m length, 19mm width
- Matte white
- Leaves no residues
4,90 €
incl. VAT, shipping costs apply
- 0,2 kg
- Available
- Ships within 3-5 days1
Double Sided Adhesive Dots 25mm
Double sided, transparent adhesive dots, 25mm. Professional industrial quality - once they stick, they stick! Extremely thin and durable. They are perfect for fixing our piezo contact mics somewhere.
0,75 €
incl. VAT, shipping costs apply
- 0,01 kg
- Available
- Ships within 3-5 days1
Double sided Adhesive Pads
Double sided adhesive pieces 25,4 x 25,4mm, 0,8mm thick white foam. You get 10 pieces on 1 pad. Professional industrial quality - once they stick, they stick! Extremely durable, you can fix anything with this, they are hard to remove. We fixed multiple power outlets with them on the wall and it stays! Also perfect for fixing our piezo contact mics somewhere, when you want to decouple them a bit from the surface.
1,90 €
incl. VAT, shipping costs apply
- 0,01 kg
- Available
- Ships within 3-5 days1
Reaming Tool
Universal Hole Drill / Reaming Tool. A nice tool to extend holes in front panels and plastic boxes. This is no high quality Kruppstahl german engineering of death™ tool, but still very handy. It is for extending holes, we do not recommend to use it for starting a hole from zero.
5,95 €
incl. VAT, shipping costs apply
- 0,1 kg
- Sold out at the moment
Triple Set Step-Drills
Triple Set of cheapo-stepdrills. Works, but don't expect high and very long lasting quality. But good if you have to do some little jobs. Steps of 2mm each. a) 4-12mm, b) 4-20mm, c) 4-32mm
2,99 €
incl. VAT, shipping costs apply
- 0,25 kg
- Sold out at the moment
Stepped Drill
Stepped drill 3mm-13mm, titanium coated. Always needed when you DIY panels or pedal enclosures.
4,99 €
incl. VAT, shipping costs apply
- 0,06 kg
- Sold out at the moment
Love Music, Hate Presets
Cardboard sign with embossed print. Handmade in Leipzig-Connewitz by Papp-O-Mania.
5,00 €
incl. VAT, shipping costs apply
- 0,1 kg
- Sold out at the moment
Meanwell Power Supply DC +12V / 1,25A
Meanwell switching power supply. In = 90-260V (AC), out = +12V DC stabilized at ~1250mA, Euro-plug. Polarity: center positive. Plug: standard 5,5/2,1mm. In combination with our 12V to 9V power converter you can get a clean and stable 9V (DC) source for your DIY projects or stompboxes.
16,50 €
incl. VAT, shipping costs apply
- 0,15 kg
- Sold out at the moment
Meanwell Power Supply DC +12V / 0,5A
Meanwell switching power supply. In = 100-240V (AC), out = +12V DC stabilized at ~500mA, Euro-plug. Polarity: center positive. Plug: standard 5,5/2,1mm. In combination with our 12V to 9V power converter you can get a clean and stable 9V (DC) source for your DIY projects or stompboxes.
12,50 €
incl. VAT, shipping costs apply
- 0,1 kg
- Available
- Ships within 3-5 days1
Meanwell Power Supply DC +9V / 0,66A
Meanwell switching power supply. In = 100-240V (AC), out = +9V DC stabilized at ~660mA, Euro-plug. Polarity: center positive. Plug: standard 5,5/2,1mm.
12,50 €
incl. VAT, shipping costs apply
- 0,11 kg
- Sold out at the moment
Standard Power Supply DC +12V / 1A
Standard switching power supply. In = 230V (AC), out = +12V DC, Euro-plug. Polarity: center positive. Plug: standard 5,5/2,1mm. Might have a switch or not, manufacturer might change. Min. 1A, might have more.
8,90 €
incl. VAT, shipping costs apply
- 0,15 kg
- Sold out at the moment
Ersa Lötfibel
Ersa Lötfibel, german. Some interesting information about soldering. Free with every order if you like.
0,00 €
incl. VAT, shipping costs apply
- 0,1 kg
- Sold out at the moment