Products of Sebsongs Modular
Hi! I’m Sebastian and I’m the person behind Sebsongs Modular. I’ve been building and designing modular kits, guitar pedals and other electronics for 20 years. In the fall of 2021 I made my eurorack module designs available as DIY kits. We now have four modules available, with more to follow in the future! If you have questions or just want to say hello, contact me via the contact page or follow Sebsongs Modular on Instagram!
Sebsongs - Attenuvert x6
sold out at the moment
ATTENUVERT x6 is just what it sounds like - six attenuverters in one module!The module consists of six inputs, six outputs and six knobs. Each attenuverter can handle +/- 12V signals. All attenuverters are DC coupled.ATTENUVERT x6 is a very useful utility module for tuning in modulation amplitudes and polarities, but it can also be used to invert gate signals and attenuate audio signals.DIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.
€70.00*
Sebsongs - Euclidean
available
EUCLIDEAN is a gate sequencer for the Eurorack format based on the euclidean algorithm. It is based on the euclidean DIY module developed by Music Thing Modular’s Tom Whitwell, and he has blessed this module with his approval.The module consists of three channels of sixteen step sequences, and each channel can be set to any length, density and offset between one an sixteen. You get clear visual feedback due to the 8×8 matrix LED display, and setting each channel is easily done with the three encoders.EUCLIDEAN is perfect for creating polymetric rhythms, odd time signature sequencing or clock division with a twist.The module runs an internal clock set to 120 BPM by default, but can be triggered and reset externally. Each sequencer channel has a dedicated trigger output. In addition, the first channel has an inverted output that outputs triggers on every offbeat.Trigger output voltage: 5VDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
€158.27*
Sebsongs - Odds
sold out at the moment
ODDS is a generative melodic looping sequencer for the Eurorack format. It generates notes based on random probability, and it is designed to be as musical as possible while maintaining a direct and minimalistic interface. It enables you to set a probability to generate random notes within a given octave, scale and chord structure.The module can via the LOOP switch either be set to indefinitely generate random notes, or be set to loop the last up to 64 steps. The V/OCT input acts as transposition within the chosen scale, making it easy to create chord progressions.Gate output voltage: 5 VCV output voltage range: 0-7 VDIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.
€122.57*
Sebsongs - Offset x6
available
OFFSET x6 is the perfect sibling to the ATTENUVERT x6 - six DC offset channels in a slim package!The module consists of six inputs, six outputs and six knobs. Each offset channel can offset AC or DC signals with +/- 5V DC. Without any signal connected to the inputs, the outputs generate adjustable +/- 5V DC voltages, which for instance could be handy for offsetting v/oct inputs on a VCO.OFFSET x6 is a very useful utility module for tuning in DC offsets for modulation. Many digital modules only accept unipolar modulation (only positive voltages), and many modulation sources are bipolar (positive and negative voltages). OFFSET x6 makes it possible to “shift” the +/- 5V signal from an LFO to instead being a 0-10V signal. Use it in conjunction with ATTENUVERT x6 to also shape the amplitude and polarity of your modulation sources.DIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.
€71.28*
Sebsongs - Polyseq
available
Designed with performance in mind, POLYSEQ delivers a flexible polyphonic step sequencing workflow. Any of the 8 memory slots can be programmed via external CV/GATE up to 64 steps in length. In playback mode, any of the three outputs can play back from any memory slot, making it possible to create polyphonic and polymetric sequences with low effort. POLYSEQ can be clocked internally with swing or externally via the clock input.Polyseq can be clocked internally (5-300 BPM) or externally. The internal clock has swing from 5 to 95% (Hold MODE and adjust the tempo pot).Beside CV and GATE, sequences can have rests, ties and glide. There’s also a skip function which steps forward in the sequence without overwriting anything. This is handy for editing sequences or changing the sequence length. Each channel can do forward, backward, ping-pong and random playback (Hold MODE and press channel switch to toggle through the modes). Each playback channel can also be clock divided from 1 through 8 (Hold MODE+CH and adjust the memory division rotary switch). Finally, each channel can be individually muted (Short press on channel switch, latching).DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€159.00*
Sebsongs - Sampler
only 2 left
The Sebsongs Modular SAMPLER is an intuitive 12 bit audio recorder and manipulator designed for short loops and one shots. Sounds can be recorded either with the built in microphone or a mono input jack, which can handle anything from a regular laptop or smartphone to modular level signals. The SAMPLER has granular control of the recorded audio and you can play around with pitch, forward and reverse, start position and loop length (or connect cv/gate to any parameter) to open up a world of interesting sounds!The SAMPLER can be used in looping mode, where for instance time stretch like effects can be obtained easily by modulating the start parameter, or in one shot mode where the reset input is used to trigger playback of the recorded audio and the SAMPLER can function as a drum sample player.The maximum recording length is around 3.5 seconds in the highest sample rate (pitch control fully forward or reverse). If you lower the pitch you get longer recording time. Change the pitch while sampling to obtain pitch fluctuations and tape stop effects.Sound can be recorded either with the built in electret microphone or via mono input jack*. The audio input has enough gain for amplifying regular laptop or smartphone headphone outputs, and the input can also handle modular level signals.* If connecting stereo signal from a laptop / smartphone via either TS or TRS mini jack cable it is advisable to pan the source fully left to avoid distortion.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
€172.55*
Sebsongs - ST Mixer XL
only 1 left
ST MIXER XL is effectively an eight channel stereo mixer with a really good sounding headphone amplifier built in. It is designed to be the final output module of a larger system that you want to use with headphones and simultaneous recording via 1/8 inch stereo jack cable to a portable recorder.The module consists of four mono channels with level, panning and aux send control, and two stereo channel with level control and separate inputs for left and right. The stereo PHONES and LINE OUT outputs also have level control. The AUX output is a mix of the aux sends from the four mono channels. The OUT 1 is a buffered direct out from channel one, to feed to a looper for instance.ST MIXER XL is perfect for a larger system with up to four mono synth voices and a stereo effect. The headphone output can drive most headphones quite well and the line output is perfect for recording with a portable recorder or an audio interface.DIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.
€170.00*
Sebsongs - Stereo Mixer
sold out at the moment
Panning Stereo Mixer. ST MIXER is effectively a five channel stereo mixer with a really good sounding headphone amplifier built in. It is designed to be the final output module of a small portable system that you want to use with headphones or for recording via 1/8 inch stereo jack cable to a portable recorder.The module consists of three mono channels with level and panning control and one stereo channel with level control and separate inputs for left and right. The stereo headphone output also has level control.ST MIXER is perfect for a starter system with a couple of synth voices and a stereo effect. The headphone output can drive most headphones quite well and also doubles as a recording output to connect to for instance a Zoom recorder.Headphone output power: 6,4 mW @ 73 ohmsDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
€101.15*