Electrosmith - Daisy Seed (No Headers)
Product information "Electrosmith - Daisy Seed (No Headers)"
Plug in a USB cable to power the board and start making sound, upload an example program over USB, and tweak it in real time. Firmware developed for Daisy is released free under a permissive open-source licence, and the platform is programmable in C++, Arduino, Max/MSP Gen~ and Pure Data.
Hardware highlights include stereo audio I/O at 96 kHz / 24-bit (AC-coupled), an ARM Cortex-M7 MCU running at 480 MHz, 64 MB of SDRAM (enough for up to 10-minute audio buffers), 8 MB of external flash, an SD-card interface, 31 GPIOs, 12 16-bit ADC inputs, 2 12-bit DC-coupled DAC outputs, PWM outputs and common serial buses (SPI, UART, SAI/I2S, I2C), plus a dedicated VIN pin for external power – everything you need for complex, standalone audio devices.
Features:
• Stereo audio I/O – 96 kHz / 24-bit audio hardware (AC-coupled)
• Programmable in: C++, Arduino, Max/MSP Gen~, Pure Data
• ×31 GPIO, ×12 ADC inputs (16-bit), ×2 DAC outputs (12-bit, DC-coupled)
• ARM Cortex-M7 MCU running at 480 MHz
• 64 MB of SDRAM for up to 10-minute audio buffers, 8 MB external flash
• SD-card interface, PWM outputs, and various serial protocols for external devices (SPI, UART, SAI/I2S, I2C)
• Dedicated VIN pin for external power
| Header: | No Header |
|---|---|
| Pin Count: | 40 |
| Pin Pitch [mm]: | 2,54 |
| Technology: | THT |
Electrosmith believes that designing audio devices is an art form, not just a science.
That belief drives the creation of a seamless hardware and software platform that lets audio designers, musicians, and developers focus on making the world sound better – instead of reinventing the wheel.
Since its launch in 2019, the Electrosmith Daisy platform has powered million-dollar Kickstarter audio products, been taught in Ivy League university courses and brought cutting-edge sound to interactive art installations around the world.
Login
Manufacturer / Hersteller:
Electro-Distro
1100 Calle Cordillera
San Clemente, CA 92673-6238 United States
orders@electro-distro.com
EU responsible:
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Nonnenstrasse 19
04229 Leipzig, Germany
support@exploding-shed.com
WEEE-Nr.: DE94097895
Product Safety Information
Please read this safety guide before installation or use.
Intended Use
• Electronic components, including potentiometers, knobs, switches, connectors, resistors, capacitors or integrated circuits (ICs), are designed for use in electronic circuits and devices.
• Use these components only for their intended purposes in electrical and electronic applications, according to their specified voltage, current, and environmental conditions.
• Any use outside the intended applications may result in malfunction or safety risks.
Handling and Installation
Installation:
• Handle electronic components with appropriate tools, such as tweezers, to avoid physical damage or exposure to electric shock.
• Ensure that the components are installed in the correct orientation and according to manufacturer specifications to avoid malfunction or damage to the circuit.
Storage:
• Store components in a dry, cool, and static-free environment to avoid damage from moisture, extreme temperatures, or electrostatic discharge (ESD).
• Avoid direct exposure to sunlight, which could affect component stability and performance.
Protection from Static Electricity:
• Use antistatic equipment (e.g., wrist straps, ESD mats) when handling electronic components to prevent electrostatic discharge, which can damage sensitive devices like ICs.
Compatibility:
• Make sure electronic components are compatible with the circuit in terms of voltage, current, and other technical specifications.
Warnings
Electrical Shock Hazard:
• Some components can retain charge even when disconnected. Use appropriate tools and take precautions when handling components to minimize the risk of electric shock.
Burn or Fire Risk:
• Overloading or misusing electronic components may result in overheating, which could lead to burning or fires. Ensure that components are used within their specified voltage and current ratings.
Danger from Misuse:
• Incorrect handling or use outside specified limits can damage the components or affect the performance and functionality of connected devices. Only use components within their specified tolerances and conditions.
Choking Hazard:
• Small electronic components can pose a choking hazard if swallowed. Keep components out of reach of children.
Contact Information
For further information visit the manufacturers homepage or shop support team at:
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Nonnenstrasse 19, 04229 Leipzig, Germany
support@exploding-shed.com
Product Safety Information
Please read this safety guide before installation or use.
Important Notice & Intended Use
• This kit is intended for adult users experienced in electronics and modular synthesis.
• The completed module is intended for installation in a Eurorack-compatible synthesizer system.
General Warnings
Sharp Edges:
• The module’s faceplate and components may have sharp edges. Handle with care to avoid cuts or scratches.
Small Parts:
• Contains small parts that could cause a choking hazard. Keep away from children and pets.
Compatibility:
• This module is designed specifically for Eurorack-compatible systems. Connecting it to non-compatible systems may result in damage or malfunction.
Assembly Requirements
• Soldering skills are required to complete the module.
• Ensure a clean, well-lit and ventilated workspace free of flammable materials during assembly.
• Use appropriate tools and safety equipment, such as eye protection.
Testing
• Test the module thoroughly for shorts or incorrect assembly before powering it in your Eurorack system. When the unit has malfunctions due to incorrect assembly, the entire Eurorack system might be damaged. It's a good idea to test it in a separate case with only that single module.
• Use a multimeter or other appropriate tools to confirm proper functionality.
Installation and Use
• Mount securely in a Eurorack case using the provided screws.
• Connect only when the power is off.
• Follow the module's user guide for instructions on operation. Do not exceed the input/output limits specified.
Responsibility
Users are solely responsible for proper assembly and testing. Contact manufacturer support for assistance if needed.
Environmental Safety
• Dispose of the module, its components, and packaging in accordance with local electronic waste regulations.
Liability Disclaimer
• The manufacturer or distributor is not responsible for any injury, damage, or malfunction resulting from improper installation, use, or modification of this product.
Contact Information
For further assistance, contact the manufacturer or our shop support team at:
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Nonnenstrasse 19, 04229 Leipzig, Germany
support@exploding-shed.com