Music Thing Modular - Volts (Turing Machine Expander)
Product information "Music Thing Modular - Volts (Turing Machine Expander)"
• Tweak five potentiometers to set up another voltage output from the Turing Machine. This can be a different melodic sequence, related to but different from the main output.
• This is a simple, low-parts count, low-current expander for the Turing Machine Random Sequencer in 4HP. It connects around the back with a 16-way ribbon cable and works with any Turing Machine (Mk2, or Mk1 with the backpack).
• It acts like a variable 5-bit digital-to-analog converter, taking 5 bits from the Turing Machine GATES expansion port, running them through five potentiometers and giving one summed voltage output.
• Multiple Volts expanders can be daisychained from one Turing sequencer to give melodically different outputs that are all related to (and change with) the main Turing sequence.
• You can try out a fully operational Turing Machine + Pulses + Volts in the free VCV Rack software.
• Volts is a shrunken version of the original Voltages expander, and was designed in one day while on holiday in Cornwall.
• Volts is a very straightforward through-hole DIY build, that would be a good first DIY project. If you get stuck, the Volts Github Issue List or the main Turing Machine issue list are probably the best places to start, although very few people have ever had difficulty with this module.
• Multiple VOLTS modules can be daisy-chained on a single Turing Machine to give a ‘polyphonic’ CV output.
DIY-Kit-Type:
THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
• This is a simple, low-parts count, low-current expander for the Turing Machine Random Sequencer in 4HP. It connects around the back with a 16-way ribbon cable and works with any Turing Machine (Mk2, or Mk1 with the backpack).
• It acts like a variable 5-bit digital-to-analog converter, taking 5 bits from the Turing Machine GATES expansion port, running them through five potentiometers and giving one summed voltage output.
• Multiple Volts expanders can be daisychained from one Turing sequencer to give melodically different outputs that are all related to (and change with) the main Turing sequence.
• You can try out a fully operational Turing Machine + Pulses + Volts in the free VCV Rack software.
• Volts is a shrunken version of the original Voltages expander, and was designed in one day while on holiday in Cornwall.
• Volts is a very straightforward through-hole DIY build, that would be a good first DIY project. If you get stuck, the Volts Github Issue List or the main Turing Machine issue list are probably the best places to start, although very few people have ever had difficulty with this module.
• Multiple VOLTS modules can be daisy-chained on a single Turing Machine to give a ‘polyphonic’ CV output.
DIY-Kit-Type:
THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
| DIY Level: | Easy |
|---|---|
| Depth [mm]: | 24 |
| Width [HP]: | 4 |
| Format: | 3U |
| Panel / Color: | Silver Alu |
Manufacturer / Hersteller:
Thonk Ltd.
New England House
BN1 4GH Brighton
UK
support@thonk.co.uk
EU responsible:
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Nonnenstrasse 19
04229 Leipzig, Germany
support@exploding-shed.com
WEEE-Nr.: DE94097895
Product Safety Information
Eurorack DIY Kits
Important Notice & Intended Use
Please read this safety guide before installation or use. This kit is intended for adult users experienced in electronics and modular synthesis. Assembly, including soldering, is required. Proper testing and installation are essential to ensure safe and functional operation. The completed module is intended for installation in a Eurorack-compatible synthesizer system powered by ±12V and +5V.
General Warnings
1. Electrical Hazards:
• Ensure the power supply matches the module’s specified voltage and current ratings (refer to the product manual). Incorrect voltage can damage the module and pose a safety risk.
• Never connect or disconnect the module while the Eurorack system is powered on.
• Wrong polarity can damage your module or system. Make sure the module is connected with correct polarity.
2. Heat Generation:
• The module may generate heat during operation. Ensure proper ventilation within your Eurorack case to prevent overheating.
3. Sharp Edges:
• The module’s faceplate and components may have sharp edges. Handle with care to avoid cuts or scratches.
4. Small Parts:
• Contains small parts that could cause a choking hazard. Keep away from children and pets.
5. Compatibility:
• This module is designed specifically for Eurorack-compatible systems. Connecting it to non-compatible systems may result in damage or malfunction.
Assembly Requirements
• Soldering skills are required to complete the module.
• Ensure a clean, well-lit and ventilated workspace free of flammable materials during assembly.
• Use appropriate tools and safety equipment, such as eye protection.
Testing
• Test the module thoroughly for shorts or incorrect assembly before powering it in your Eurorack system. When the unit has malfunctions due to incorrect assembly, the entire Eurorack system might be damaged. It's a good idea to test it in a separate case with only that single module.
• Use a multimeter or other appropriate tools to confirm proper functionality.
Installation and Use
• Mount securely in a Eurorack case using the provided screws.
• Use only the included or manufacturer-recommended power cable.
• Connect only when the power is off.
• Follow the module's user guide for instructions on operation. Do not exceed the input/output limits specified.
Responsibility
Users are solely responsible for proper assembly and testing. Contact manufacturer support for assistance if needed.
Environmental Safety
• Dispose of the module, its components, and packaging in accordance with local electronic waste regulations.
Liability Disclaimer
• The manufacturer or distributor is not responsible for any injury, damage, or malfunction resulting from improper installation, use, or modification of this product.
Contact Information
For further assistance, contact the manufacturer (you'll find the info under each product in our shop) or our shop support team at:
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Nonnenstrasse 19, 04229 Leipzig, Germany
support@exploding-shed.com
Thonk Ltd.
New England House
BN1 4GH Brighton
UK
support@thonk.co.uk
EU responsible:
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Nonnenstrasse 19
04229 Leipzig, Germany
support@exploding-shed.com
WEEE-Nr.: DE94097895
Product Safety Information
Eurorack DIY Kits
Important Notice & Intended Use
Please read this safety guide before installation or use. This kit is intended for adult users experienced in electronics and modular synthesis. Assembly, including soldering, is required. Proper testing and installation are essential to ensure safe and functional operation. The completed module is intended for installation in a Eurorack-compatible synthesizer system powered by ±12V and +5V.
General Warnings
1. Electrical Hazards:
• Ensure the power supply matches the module’s specified voltage and current ratings (refer to the product manual). Incorrect voltage can damage the module and pose a safety risk.
• Never connect or disconnect the module while the Eurorack system is powered on.
• Wrong polarity can damage your module or system. Make sure the module is connected with correct polarity.
2. Heat Generation:
• The module may generate heat during operation. Ensure proper ventilation within your Eurorack case to prevent overheating.
3. Sharp Edges:
• The module’s faceplate and components may have sharp edges. Handle with care to avoid cuts or scratches.
4. Small Parts:
• Contains small parts that could cause a choking hazard. Keep away from children and pets.
5. Compatibility:
• This module is designed specifically for Eurorack-compatible systems. Connecting it to non-compatible systems may result in damage or malfunction.
Assembly Requirements
• Soldering skills are required to complete the module.
• Ensure a clean, well-lit and ventilated workspace free of flammable materials during assembly.
• Use appropriate tools and safety equipment, such as eye protection.
Testing
• Test the module thoroughly for shorts or incorrect assembly before powering it in your Eurorack system. When the unit has malfunctions due to incorrect assembly, the entire Eurorack system might be damaged. It's a good idea to test it in a separate case with only that single module.
• Use a multimeter or other appropriate tools to confirm proper functionality.
Installation and Use
• Mount securely in a Eurorack case using the provided screws.
• Use only the included or manufacturer-recommended power cable.
• Connect only when the power is off.
• Follow the module's user guide for instructions on operation. Do not exceed the input/output limits specified.
Responsibility
Users are solely responsible for proper assembly and testing. Contact manufacturer support for assistance if needed.
Environmental Safety
• Dispose of the module, its components, and packaging in accordance with local electronic waste regulations.
Liability Disclaimer
• The manufacturer or distributor is not responsible for any injury, damage, or malfunction resulting from improper installation, use, or modification of this product.
Contact Information
For further assistance, contact the manufacturer (you'll find the info under each product in our shop) or our shop support team at:
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Nonnenstrasse 19, 04229 Leipzig, Germany
support@exploding-shed.com
Manufacturer "Music Thing Modular"
Eurorack Modular Synth format. They are designed in Herne Hill, London by Tom Whitwell.
I’m a former journalist and magazine editor (Mixmag & The Face). In the noughties I ran the Music Thing blog, before working at The Times. Got into DIY electronics after attending a workshop with Tom Bugs, reading Handmade Electronic Music, playing with Arduino and building guitar pedals.
Contacting me directly is rarely a quick way to get help with a project or a technical problem. GitHub issue lists are a good place to start (Turing Machine, Radio Music), a search of MW DIY will often find answers, as will looking at the Facebook Synth DIY group.
You can read more about Music Thing Modular and open source in this article: Why Open Source Music Hardware works for Music Thing Modular.
Login
Info & Downloads
Git Hub
Video 1
Video 2
DIY Infos
Build Guide
User Manual
Modular Grid
Manufacturer Website