AtoVproject - MMx2
available
Expand the power of your modulations with the MMx2, a dual-pack module designed to bring flexibility and creativity into your system. Each MMx2 package contains a pair of MM modules.Sold as a pair, MM modules can function as two separate units or be linked for expanded matrix mixing capabilities. Connect even more MM modules to increase the power of your Eurorack synthesiser!Every MM module has attenuator on the first two inputs and attenuverters on the last two and the MM modules amplify the mixed output by 2.The MMx2 merges essential utilities into one powerful package, offering a CV mixer, attenuverters, signal amplification, offset generator, and a multiple, all in a compact form. Ideal for distributing modulations, creating complex mixers, generating stereo effects, and much more.The MMx2 is a testament to AtoVproject's dedication to creating instruments that allow you to express yourself and reward your understanding and exploration. To facilitate this, the MMx2 comes with a detailed manual full of inspirational patch ideas that will take your sound design to the next level.Dive into the world of advanced modulation manipulation with MMx2.Stay inspired! Stay innovative!Features:• Sold as a pair• 4 in 1 DC Mixer• Multiple MMs can be combined into a matrix mixer• Optimized for CV - Audio compatible• Input 1 and 2 have attenuators• Input 3 and 4 have attenuverters (polarizers)• Input 1 to 3 can be chained to the next module Input 4 is normalled to a voltage source so it can be used as offset controlDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
€160.00*
Black Noise Modular - Pipe
only 1 left
Now introducing PIPE in our sleek Black & Gold theme, featuring a reversible faceplate. Feel like installing your PIPE upside down? No worries – just unscrew the 8 jnuts, flip the faceplate, and put everything back together and Voila! You can now use your PIPE with the connector facing down!
With the ability to connect up to 8 inputs or outputs via an ethernet cable, the PIPE-S makes it easy to connect multiple cases together or avoid any cable mess accross a case. This makes it the perfect solution for simply setting up your Eurorack system in the studio or a live gig.
But that's not all, PIPE can also be used as a multiple passive 3 section. Want to transmit precise signals like pitch CV and want to avoid crosstalk induced by passive multiples? No worries you can easily deactivate this function for each section from the connector at the back of the module.
The best part is that PIPE is completely passive which means you can place it anywhere, it doesn't draw any current from your power supply, which perhaps makes it the simplest DIY module!
PIPE modules are sold by pair.
The ethernet cable is not supplied with the modules
Regarding Ethernet cable
We recommend shielded Straight-Thru RJ45 cable.
Using un-shielded or Crossover cable won't damage your modules but you may experience noise and or mixed channels.
Due to its passive nature we also recommend to avoid long ethernet cables.
DIY-Kit-Type:
SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€70.00*
Black Noise Modular - Pipe - S
only 2 left
With the ability to connect up to 8 inputs or outputs via an ethernet cable, the PIPE-S makes it easy to connect multiple case together or avoid any cable mess accross a case. This makes it the perfect solution for simply setting up your Eurorack system in the studio or a live gig.
But that's not all, PIPE-S can also be used as a multiple passive 3 section. Want to transmit precise signals like pitch CV and want to avoid crosstalk induced by passive multiples? No worries you can easily deactivate this function for each section from the connector at the back of the module.
The best part is that PIPE-S is completely passive which means you can place it anywhere, it doesn't draw any current from your power supply, which perhaps makes it the simplest DIY module!
PIPE-S modules are sold in pairs.
The ethernet cable is not supplied with the modules
Regarding Ethernet cable
We recommend shielded Straight-Thru RJ45 cable.
Using un-shielded or Crossover cable won't damage your modules but you may experience noise and or mixed channels.
Due to its passive nature we also recommend to avoid long ethernet cables.
DIY-Kit-Type:
SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€70.00*
Frequency Central - Looking Glass
sold out at the moment
Looking Glass is an 5 x 5 active patchbay/matrix mixer/switcher for both audio and control voltages.Features:• 5 inputs (1 through to 5), each with attenuators• 5 inverted outputs (A through to E) which are 180o out of phase with the inputs• 5 normal outputs (A through to E) which are in phase with the inputs• A switch matrix of 25 push on/push off switches and LED status indicatorsDIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.
€76.00*
Frequency Central - Wonderland
only 2 left
Wonderland is an 8×8 active patchbay/matrix mixer/switcher for both audio and control voltages.Any of the 8 inputs can be patched to any of the 8 outputs simply by pressing the corresponding switches. A patched signal will appear at both normal and inverted outputs simultaneously.A single input can be patched to a single output. A single input can be patched to multiple outputs. Multiple inputs can be patched to a single output. Multiple inputs can be patched to multiple outputs.Each input features a micro-attenuator which can be set with a small screwdriver. This space saving feature allows you to reduce the volume of an incoming signal without having to resort to external attenuators. If you add many inputs to one output you will of course cause clipping (which may or may not be desirable!), the micro-attenuators are your on-board way around this. I find it useful to leave the micro-attenuators set to 50% (which is how they come pre-set at delivery). Of course, their size is a little bit of a compromise, but they are a useful feature nonetheless. Wonderland’s sister module Looking Glass includes full size input attenuators as well as LED status indicators.Features:• 8 inputs (1 through to 8), each with micro-attenuators (which can be set with a small screwdriver)• 8 buffered inverted outputs (A through to H) which are 180o out of phase with the inputs• 8 buffered normal outputs (A through to H) which are in phase with the inputs• A switch matrix of 64 push on/push off switchesDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
€130.00*