ADDAC System - 604 Dual Filter
only 1 left
While developing our ADDAC105 4 Voice Cluster module we made a new multimode filter to place after the summing mix stage. We were so pleased with its sound that decided to release it as a dedicated filter.To make it more interesting we duplicated its circuitry to be able to use it in a stereo signal path.To make it more versatile we added a switch to set the working mode from Stereo to Dual Mono where both filters can be used independently.In Stereo Mode the Left Cutoff is used to control the Right Cutoff.In this case the Right Cutoff Knob and CV Input are simply bypassed and will have no impact on the Right Channel operation.This allows immediate sync of both filter frequencies when the Stereo position is engaged.Optionally there’s a jumper in it’s back that, when placed, connects the Right Controls back to the Right CV control allowing the possibility to control the offset of the Right Channel Cutoff.Resonance is independent on both Modes and still has to be set manually to match both channels.Both the Audio and CV inputs are normalled from the Left into the Right channels.As standard plugging any input to the Right channels removes this connection.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€149.90*
ADDAC System - 605 Spectral Tilt
available
The TILT EQ concept was first introduced in the 1970's by Quad Ltd, featured on the company’s model 34 preamplifier. The tilt control tilts the frequency spectrum of the audio signal by simultaneously boosting the treble and cutting the bass frequencies, or vice versa, making it a simple to use but powerful EQ.As stated by Quad Ltd, it was designed to produce a very gradual change in balance across the musical spectrum without changing the overall subjective level. This gradual fall from Bass to Treble, or vice versa, means there’s no sudden change and hence no ‘coloration’ added to the sound, the sound will remain entirely natural but with a slight added bottom or high end. In practice, it rotates most of the audio-range frequency response around a 1kHz axis, so as to change the overall balance of the sound from warm to cool without affecting either the apparent volume or the "color" of the sound.Here we introduce this idea into the modular world in a stereo configuration. CV input with attenuverter was added for the Tilt control as well as a Spectral Motion switch that allows stereo spectral matching or inverted spectrum use of the Tilt control: Left = Right matches both channels direction, i.e. when left channel is tilted to the low end the right channel will also be tilted to the low end. Left ≠ Right inverts the Right channel spectrum, i.e. when left channel is tilted to the low end the right channel will be inversally tilted to the high end, or vice-versa. This possibility is extremely interesting when applied as a stereo effect, in other words, a spectral EQ panner.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€118.00*
ADDAC System - 710 Balanced Outputs
sold out at the moment
ADDAC710 is a dual channel Isolated DI box and is all about keeping the sound coming from your Modular free from any undesired noisy interferences, making sure that what you’re getting from your outputs is what your Modular is actually producing. It provides galvanic electrical isolation between the Modular system and external sources preventing impedance mismatch and ground loop induced hum.ADDAC’s 710 circuit is designed around a unity 1:1 type Audio Transformer operating in the 20 Hz to 20 KHz range, this impedance matching transformer provides two fully balanced outputs (via XLR connectors).ADDAC710 is an alternative to our ADDAC800X High-End Outputs module, we redesigned the original circuit using a smaller transformer that also reduced it’s depth allowing it to fit shallow Eurorack cases.The LIFT/FLOAT/GND 3-way switch lets you choose between lift, ground or floating ground.In the LIFT position (left) the module circuit will be “lifted” to ground through a 100R resistor and a 10nF capacitor.In the FLOAT position (middle) Ground will not be shared leaving ins and outs grounds completely apart from each other fully isolating both signals.in the GND position (right) Ground will be shared between inputs and outputs, here no isolation is used.Any of these three positions may be the best form of avoiding ground loops or any other undesired interference occurring between your modular and the sound system you’re plugging it into.Try out which one of these options will work best in any given situation.DIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.
€138.00*
ADDAC System - 711 Balanced Inputs
only 2 left
ADDAC711 is a dual channel Isolated DI box and is all about keeping the sound coming into your Modular free from any undesired noisy interferences, making sure that what you’re getting from your inputs is what your external hardware is actually producing. It provides galvanic electrical isolation between the Modular system and external sources preventing impedance mismatch and ground loop induced hum.ADDAC’s 711 circuit is designed around a unity 1:1 type Audio Transformer operating in the 20 Hz to 20 kHz range, this impedance matching transformer provides two fully balanced outputs (via XLR connectors).The LIFT/FLOAT/GND 3-way switch lets you choose between lift, ground or floating ground.In the LIFT position (left) the module circuit will be “lifted” to ground through a 100R resistor and a 10nF capacitor.In the FLOAT position (middle) Ground will not be shared leaving ins and outs grounds completely apart from each other fully isolating both signals.in the GND position (right) Ground will be shared between inputs and outputs, here no isolation is used.Any of these three positions may be the best form of avoiding ground loops or any other undesired interference occurring between your modular and the external hard- ware. Try out which one of these options will work best in any given situation.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€210.00*
ADDAC System - 712 Vintage Pre
available
ADDAC712 is a dual channel discrete gain staging amplifier, based on a famous discrete preamp board from the 70’s used in some legendary equipment. What caught our attention was the character of it’s clipping and resulting saturation/distortion.The module can be used with modular signals to add a distortion/fuzz character or as a preamp for an external source such as a line source, keyboard, guitar... It’s also a great side companion for our ADDAC711 Balanced Inputs.At the top an On/Off [BYPASS] switch routes the signal into the Effect (Up: Active) or to the bottom output gain stage (Down: Bypassed).The amount of amplification is set by the [GAIN] control, the maximum amount of amplification can be set by the user using the [MAX GAIN] trimmer.Up to ±5,5v the incoming signal will keep it’s integrity, beyond this point saturation will start to increase. At approx. ±6v a hard clipping will start to occur, this clipping also has a particular quality that at extreme levels it drifts the audio 0v bias reference, moving it upwards which results are similar to a Gate effect.In the middle, an x2 op-amp based output gain stage with a clipping LED, which monitors the clipping at the output, and an [OUTPUT] control to set the output volume.Having the top and middle gain stages provides flexibility allowing the user to completely distort the signal on the top stage and tame it’s output level with the second stage.At the bottom, input and output for both channels (left input is normalled into right input).DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€105.90*
ADDAC System - 713 Stereo Discrete Mixer
sold out at the moment
ADDAC713 is the stereo version of our 703 Discrete Mixer. Inspired by Moog’s CP3 mixer, this is a fully discrete analog mixer and it's not, by any means, your standard breakfast mixer, although it can behave like one.This is a wolf in sheep's clothing. Despite its harmless looks there's a dark snarly soul behind that panel that wants to take your sounds into a realm of gritty gnarly growls.This new version was initially thought of as a percussion mixer, with mono inputs and panning, to allow placing percussive voices in the stereo field, while keeping channel 4 in mono for low end sources like a kick drum or Bass. In the development process we slightly changed this initial idea, adding stereo inputs for the first 3 channels, but still kept the 4th channel in mono.All four [GAIN] controls go to extreme levels, the first 3 channels also feature [PAN] controls.Feedback is used to overdrive the whole mix. As the control is turned clockwise the sound will be clipped harder until it goes completely off, this happens as feedback is increased the audio bias reference also moves up, at extreme levels it offsets the whole signal upwards until it completely goes above the top rail clipping the whole signal hence the resulting gate effect.The [MASTER OUTPUT] sets the overall output gain of the mixer, the two LEDs monitor the audio output signal.The soft clipping switch engages an anti-click circuit which adds a low pass before the output, the switch allows 3 states: Soft low pass / Off / Hard low passFeatures:• Three channels with stereo inputs, gain and pan knob• One channel with mono input and gain knob• Feedback/gate knob• Master output volume knob• Soft clipping switchDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€137.50*
ADDAC System - 805 VC Signal Router V2
available
Inspired by our ADDAC701 VCO waveform mixing section, our new VC Signal Router also updates our legacy X-Fade/Panner to a stereo configuration that also allows 4 quadrant mixing.Featuring two dedicated X-faders and a stereo VCA that can also be used as a third X-Fader. All controls have their own CV inputs and dedicated Attenuverters for precision control.4 quadrant mixing is achieved by using the stereo Master as a X-fader between left and right channels, this way you can plug 4 audio sources and sweep/crossfade between each and any of them using the 3 x-faders. Plug any 4 sources (4 waveforms of a VCO, 4 LFOs, 4 envelopes...) and sweep through morph through or have them all mixed together.For other configuration types Left and Right X-fader channels can be routed through the Master stereo VCA or sent directly to the outputs. A stereo Direct input can also be routed through the Master VCA or sent straight to the outputs.The Mono Sum output always mix Left and Right outputs together allowing the possibility to use the module as a peculiar 6 channel mono mixer.It can be used for both Audio or CV Signals.Features:• 6 mono inputs• 2 dedicated X-faders with Control knob + CV Input and Attenuverter Each X-fader can be routed through the Master mix or straight into the outputs.• Master channel can be used as a stereo VCA or an X-fader• Stereo direct inputs can be routed through the Master mix or straight into the outputs.• Fully analog audio path with high quality/low noise VCAs.DIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.
€168.90*
AI Synthesis - Line I/O Interface
available
The AI026 Eurorack Line Interface converts between +/- 2V line signals and +/- 5V Eurorack signals. This allows for the best headroom and highest quality when processing line signals with Eurorack modules, and vice versa.Features:• Stereo i/o• Left inputs are normalled to the right when no jack is inserted to the Right Input.• Volume control for Eurorack to line level signal conversion.• Volume control for line to Eurorack level signal conversion, with the ability to add gain/overdrive for non normalized signals.• Input and output jacksDIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.
€99.00*
Apollo View - CanCan
available
CanCan delivers studio-quality headphone amplification in a compact 4HP Eurorack module. Powered by high-current parallel op-amps, it drives headphones from 16 to 600 ohms with remarkable clarity, offering exceptional audio fidelity for any impedance.Designed for two independent headphone outputs, CanCan provides separate volume controls for precise monitoring in both solo and collaborative settings. Each channel uses a low-noise Baxandall active volume control, ensuring perfect left-right balance and stereo imaging.With built-in 8-segment LED program meters for peak or average signal monitoring, CanCan is a must-have tool for detailed audio tracking and mixing. Ideal for musicians and producers who demand clarity and precision in every headphone session.Features:• Low Output Impedance (0.5 Ohm): Ensures a high damping factor for precise control and exceptional low-frequency response• Universal Headphone Compatibility: Supports a broad impedance range of 16 to 600 Ohms• Multi-Stage Low Noise Design: Guarantees low distortion and high stability for true-to-source audio reproduction• High Output Current (Up to 140mA): For driving power-intensive headphones up to 600 Ohms with ease• Visual Feedback: Dual 8-segment LED program level meters for monitoring input signal levels• Output Flexibility: One output can be used for driving monitors (using a Y-splitter)• Full-Spectrum Audio Fidelity: Offers a 20Hz to 20kHz bandwidth, perfect for all audio experiences• Protection Features: Includes comprehensive RF and DC input protection with resettable fuses for short-circuit output safetyDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€154.00*
Apollo View – Manic
only 1 left
Developed with DivKid, Manic is a compact 8HP dual VCA module built for advanced sound sculpting. It supports mono, dual mono, or true stereo workflows with precision linear VCAs and selectable unipolar or bipolar response—ideal for amplitude shaping or ring modulation.Each channel features a dedicated post-VCA shaping stage:Shape1 delivers TanH soft clipping and classic Serge-style wavefolding.Shape2 adds hard clipping and a Buchla-inspired wavefolder.The asymmetrical design between channels creates rich, animated stereo effects from mono or stereo sources—perfect for depth and width in modular mixes.Optimized for both CV and audio, Manic is a performance-ready tool that brings hands-on control, creative modulation, and stereo imaging into any Eurorack setup.Features:• A collaborative design from both DivKid & Apollo View Modular• Selectable unipolar or bipolar VCA circuitry per channel• Three distinct shape outputs per channel: Inverted, Clipped, and Wavefolding• TanH soft clipping & hard clipping• Serge style wavefolding & Buchla style wavefolding• Stereo operation with perfectly matched gains for the clipping and wavefolding circuits, creating a stunning stereo widening effect• DC-coupled signal path for processing both audio and CV signals• Input and modulation normalisations for simple mono to stereo operation• Flexible signal flow allows for creative combinations, such as ring modulation into clipping or wavefoldingDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€238.00*
Befaco - BF-22
only 1 left
The BF-22 VCF is a dual Hi/Low-pass filter inspired by the Sallen-Key filter from the early MS-20.DISCLAIMER: This filter brings to your modular system the character of early MS-20 sound: Kick-ass-rocking-dirty screams! It inherited not only it’s amazing sound, also MS-20 noise floor. If noise floor is an issue for you, this might not be your filter.Features:• Dual-channel Sallen-Key Filter. Inspired by the early MS-20• High and Lowpass operation.• Two CV inputs per channel with a dedicated attenuverter for the first one.• CV controlled resonance.• The first channel can be linked to the second one with the “Link” switch.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
€146.37*
Befaco - Hexmix
only 2 left
Hexmix System is a six channel performance mixer specially designed for Eurorack.The system has two separate modules, the core of the mixer: Hexmix that has six channels with three band EQ, mute, pan and EQ section on the master, and Hexpander that add three auxiliar sends per channel, PFL, individual outs and balanced output.The mixer has a strong inspiration in classical DJ mixers, providing sharp EQ’s for enhanced performance, auxilliar send for effects and individual outputs to record your performance per channel.The system is designed to be placed in 6U, instead of the traditional 3U paradigm in Eurorack. So we will have every feature for each channel vertically as a conventional tabletop mixing deck.Six channel mixer with three band EQ, vactrol mutes, pan and volume control per channel.Inputs for every channel are located at left side of Hexmix. Each jack is normalized to a VCA Expander connection in the back, so if you have a Hexmix VCA , you will have the output of each VCA to every input. connecting a jack in any input will disconnect whatever is coming from VCA.Gain is set to unity, so it will act as an attenuator of the input signal. Mutes are clickless, as they are vactrol based. This circuit provide some decay on the mutes, rather than a sharp cut.Swithces have latch position and momentary ones to unmute the channel, providing some really nice performative capabilities.EQs are quite sharp (12dB) inspired in classic dj mixers to aggresively cut selected frequencies.Master section has it’s own EQ and volume control for the mix of all channels. Master EQ is softer than individual channel’s (6dB) and it’s meant to provide control over the final mix.It’s possible to change output level from line to synth with a switch located in the back.This will be pretty useful when used in combination with hexpander, that provides a balanced out at line level. Like this its possible to have a mix at synth level to re-route the master signal while having an output to PAFeatures:• Six Channel Performance Mixer• Three Band EQ per channel inspired in classical DJ mixers• Vactrol based mutes with momentary action.• Pan and Volume control• VCA Expander connection to plug every channel of an Hexmix VCA directly.• Selectable Line or Modular output level.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
€312.97*
Befaco - Hexpander
only 2 left
Hexpander adds great functionality to Hexmix module. Featuring Three aux send with stereo returns, individual outputs for each channel, complete PFL system and balanced output.Hexpander is designed to be placed on top of Hexmix. Expanding Eurorack concept to 6U, allows every channel to be aligned as in traditional tabletop mixers.Features:• Three auxiliar sends with stereo returns and individual controls per channel.• Pre and Post Fader/EQ outputs.• Selectable Line/Modular level at return inputs.• Monitor section with PFL per channel.• Individual PostEq output per channel.• Master section with Headphones amp and balanced line outputsDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
€265.37*
Befaco - InAmp
only 2 left
Inamp is a dual pre-amp in just 4 HPs. Featuring 6,3 Jacks inputs as well as Minijacks.The unit is designed to amplify up to x20 the input signal, allowing to amplify most of the music machines out there (Domestic line levels) as well as some guitars (Humbucker-like pickups and so).DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
€76.16*
Befaco - ST Mix
sold out at the moment
STMix is a compact 4 channel stereo mixer with an auxiliar input. This input will allow us to chain a few of them or to insert an extra fifth input.This module is compatible with our Hexmix System and can be internally connected to the Hexmix module to add the output of STMix to your main mix.Features:• Four channels stereo inputs with volume control• Aux input straight to the Mix out• Input Impedance selector• Level meter LEDs• Connector in the back to interface with Hexmix module.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
€76.16*
Befaco - ST Mix 1U
sold out at the moment
STMix is a four-channel stereo mixer in 28 HP and 1U format. It can work independently or as an expansion of our Hexmix module via the six-pin connector located in the back. The module is designed under the Intellijel 1U format.Features:• Four channels stereo inputs with volume control.• AC Coupled inputs to improve audio performance.• Output clipping LED indicators.• Connector at the back to interface with the Hexmix module.• 1U Intellijel format.• Pulp Logic Panel format available on demand. Call Befaco.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€70.21*
Befaco / DivKid - Output Bus
sold out at the moment
The Output Bus is your ultimate output module: Presented by DivKid and Befaco, meant to be the last link in your modular chain!Inspired by pro audio and studio summing units the Output Bus allows for summing style mixing, external gear integration, soft clip limiting, flexible output types, headphone monitoring and level visualization.The module works great mixing all your other mixers in your setup, to return mono or stereo FX into the master bus and for bringing in external stereo line level gear with ease. All of this in just 8HP while also being able to visualize your final levels, output appropriate signals on the right cable type and monitor in headphones.Features:• Six stereo inputs.• Line/synth selector in input six.• Modular level minijack out.• 6,5 mm Jack balanced out.• Minijack and 6,5 mm phones out.• Led Vu-meter.• Soft clipping circuit at main output.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
€155.00*
Black Noise Modular - Voltage Processor
only 1 left
Voltage Processor is designed to pack a lot of features in a small module.Here a some of the features you can achieve with Voltage Processor. You can find how to setup those features in the manual below.Features:• Dual VCA• Stereo VCA• CV Crossfader 2:1• CV Crossfader 1:2• Dual AM• CV PAN• Dual Attenuator• Dual Inverter• Dual Offset generator• Dual Voltage generator• Dual Exponential converter• Logarithmic converter• Dual PWM• Dual CV overdrive• Dual waveshaper• Complex waveshaper• Dual RingMod• RindMod• Compressor• Sidechain compressorDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€140.00*
CubuSynth - Dual CS-20 VCF
sold out at the moment
The CubuSynth Dual CS-20 VCF is a versatile module that combines two 12db filter cores in a dual/stereo configuration. It is inspired by the iconic Korg MS-20 synthesizer, offering similar sound characteristics while the resonance can be pushed even further.The module provides multiple filter modes, including low pass and high pass, which can be blended together to create a diverse range of filter responses. This allows you to shape your audio signal in various ways, from smooth and warm low pass filtering to more aggressive high pass filtering.One of the standout features of the CS-20 VCF is its self-oscillating resonance capability. When the resonance is turned up, the filter produces a sine wave that can be used as an additional sound source. This feature adds to the versatility of the module, allowing you to create complex and evolving sounds and even cross-FM modulation possibilities.The frequency and resonance parameters can be controlled via control voltage (CV) inputs. The frequency CV input can be attenuverted, meaning it can both attenuate and invert the incoming CV signal. This gives you precise control over the modulation depth and direction for frequency modulation.The resonance CV input includes an attenuator, allowing you to adjust the modulation depth for the resonance parameter. This feature gives you the flexibility to add dynamic and expressive modulation to your sounds.Additionally, the CS-20 VCF provides a 1V/Oct input, which allows you to control the filter's frequency using a standard 1V/Oct control voltage. This input is stable over a range of at least 2 to 3 octaves, ensuring melodic tracking and integration with other modular synthesizer components.Overall, the CubuSynth Dual CS-20 VCF offers a powerful and flexible filtering solution with intuitive routing and modulation options. It is designed to inspire creativity and provide a wide range of sonic possibilities for your modular synthesizer setup.Features:• 2 individual Filter cores with common Frequency and Resonance controls• CV control over Frequency and Resonance for each Filter core• Self-oscillating Resonance with LED feedback circuit (visible on the Front)• 1 V/oct input, tracking over 2~3 octaves• Frequency Range: 22 Hz - 20 kHz• Blend between LP / HP Filter modes• Ability to use as 2 pole (12db) stereo HP/LP Filter, 4 pole (24db) mono LP/HP or a Band Pass (12db) Filter• Cross FM Modulation possibleDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
€140.00*
CubuSynth - Dual Vintage VCA
sold out at the moment
The CubuSynth Dual Vintage VCA is a nice sounding, zero bleed, analog Voltage controlled amplifier based on the LM13700 chip.It can work as two independent VCAs or as a stereo unit, and CV input 1 on channel 1 is normalized to the CV input 1 on channel 2. (same signal can control both channels).Features:• LEVEL Knobs set the Amplitude for each channel• CV AMOUNT Attenuators for the Control voltage from CV input 1• Second CV input per channel, without attenuatorDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
€58.00*