Multiple
available
MUTE || VCA x6 might not be the smoothest of module names, however this module is a utility gem that packs a lot of punch per HP. In essence, MUTE || VCA x6 is six clickless and DC-coupled mute channels in 8 HP that can be used for muting virtually any signal within a Eurorack system. Each mute channel can be set on or off either by pushing the corresponding illuminated switch or by feeding it any signal that goes over +1 volt above ground.Six channels of mutes is surely a great thing, but what if you could configure each channel to be either a MUTE or a VCA? This module allows you to do just that! –(And this is also where the name comes from; || meaning OR)– On the back of the module there are six switches, one for each channel, and these can be set to either MUTE or VCA. This means that the module can be configured to any combination of MUTES and VCAs you wish. In VCA mode the CV input offers linear CV control over the VCA. The switch adds +5V to the CV input if it is activated, effectively making it possible to switch the CV input between bipolar and unipolar behaviour which is very handy when controlling the VCAs with LFOs.The inputs are also normalled against each other through the switched jacks, so connecting a signal into the first input cascades it to all other channels. This is perfect for sending one sound to different effects, or distributing a clock to several modules and having the option to turn the clocks on or off dynamically.Finally, with the mute switches laid out in a row to the right makes this perfect to mount to the rightmost edge of any Eurorack live system, enabling easy access to the mute switches during a live performance. All in all, this is by far the most flexible and feature packed module in the Sebsongs Modular “x6” utility series of modules!DIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
The SetonixSynth Noise Complaint! is a passive utility module which provides a bank of four passive attenuators which can be used with audio or CV. Each of the Noise Complaint’s four inputs are normalized (left to right), so that with nothing patched to a channel’s input it can be used as an attenuated mult, distributing up to four versions of one input signal and opening up myriad control possibilities, such as use of Channel One as a Macro control over the three other outputs. Channels 1-3 also have muting switches for performance-friendliness and preservation of settings.The Noise Complaint! has proven to be a very useful module for attenuation of all kinds, and adds a nice-feeling, sturdy set of performance controls to what is often a cluttered rack full of densely-packed jacks and tiny attenuation knobs.Features:• Four passive attenuator channels, three with mute switch• Inputs normalized A-D for use as an attenuated mult and more• Sturdy, performance-friendly hardware and designDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
The SetonixSynth Noise Complaint! is a passive utility module which provides a bank of four passive attenuators which can be used with audio or CV. Each of the Noise Complaint’s four inputs are normalized (left to right), so that with nothing patched to a channel’s input it can be used as an attenuated mult, distributing up to four versions of one input signal and opening up myriad control possibilities, such as use of Channel One as a Macro control over the three other outputs. Channels 1-3 also have muting switches for performance-friendliness and preservation of settings.The Noise Complaint! has proven to be a very useful module for attenuation of all kinds, and adds a nice-feeling, sturdy set of performance controls to what is often a cluttered rack full of densely-packed jacks and tiny attenuation knobs.Features:• Four passive attenuator channels, three with mute switch• Inputs normalized A-D for use as an attenuated mult and more• Sturdy, performance-friendly hardware and designDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
The Voltage Indicating Multiple is a high performance 2-channel buffered multiple with a 12-segment LED indicator for each channel that attractively shows the approximate voltage at the input and output of each channel. This custom designed, low current draw LED indicator is entirely discrete! The range is adjustable via the two rear trimmers to show a wide range of signals. Common ranges include +/-5V, +/-8V (default “factory” setting) and +/-10V. The Multiple section offers rail-to-rail performance with a <1mV offset between the input and output. These are two simple dual op-amp buffers, with each input transmitting signal to the two outputs below it. With nothing patched to the second input, the signal from the first input is normalized and its two outputs will also output the voltage present at the first Input jack. Features: • Two channel 1:2 precision buffered multiple • Can be used as 1:4 buffered multiple via normalization • 12-segment bi-polar LED bar indicators for each channel DIY-Kit-Type: SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
available
Meet the Swiss Army Knife's ambitious cousin - the multitasking marvel that sits in front of your Eurorack, ready to unravel musical puzzles, slice through soundscapes, and twea-zor its way into your sonic heart.Features:• Multiple• LFO• Attenuator• Fader• Swap• USB-PowerDIY-Kit-Type:Panel/PCB Kit. This is a do-it-yourself panel/PCB kit, no parts are supplied, you will need to source them yourself.
sold out at the moment
The u2X is a dual buffered multiple DIY kit for the 1U Intellijel format. With bicolor LEDs for monitoring signals. Each input is copied into three outputs. As the top section is normalled to the bottom section it’s also possible to get 6 copies of the same signal.DIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.