DIY Kits
available
Ok, a christmas module with pulsating lights does not make sense at all. But it’s for those nerds, who want to celebrate christmas in their Eurorack system. We made it for fun. We are sure this is one of the easiest DIY projects in the entire world. 4 LEDs, 2 resistors and a power header.DIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.
available
It's christmas time in your modular rack and this year we invented a proper christmas tree module! The LEDs of the tree change color and are used as oscillators to generate weirdo-sound. There are four sections with two LEDs each which modulate each other. You can patch the oscillator outs to the left or right output with mini-patch wires.With this DIY kit you have 2 options:1) The tree can be used standalone with a 9V battery as a simple light effect which is standing on a table etc. In this version there is no audio possible.2) You complete the whole module and solder the tree to the panel. Then you can make use of the full audio possibilities.This kit is perfect to build it with your kids or finally convince your partner, that modular maybe isn't that bad.DIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
Pack of 2 Indicator Touch Points. These ones feature a bi-polar LED inside so you can easily detect the polarity of your signal. Of course you can use them in the same way like the original Touch Points.They are assembled and no DIY.
available
5 Touch Points in black. We made them as an extension for our Touch Source, but of course you can use them without the module for wireless patching in your Eurorack system. We made them higher and smaller than comparable products or most DIY versions, so the Touch Points are easily accessible between cables and buttons in your system.
available
5 Touch Points in orange. We made them as an extension for our Touch Source, but of course you can use them without the module for wireless patching in your Eurorack system. We made them higher and smaller than comparable products or most DIY versions, so the Touch Points are easily accessible between cables and buttons in your system.
sold out at the moment
Explore wireless patching through Touch Points! Touch Source generates voltages between -10V and +10V, in the center is a touch plate with GND/0V. Place the Touch Points on any CV input of a module and connect a voltage to the Touch Point via your fingers. Or connect two Touch Points from any input to output through your body. Rule #1 is: there are no rules!Here is a review on Amazona (german) and some demo videos here and there.Touch Source includes 2 black Touch Points. Packs of 5 Touch Points are available separately in black or orange to visualize your signal flow. Packs of 2 indicator Touch Points with bi-plar LEDs are also available.The unit is pre-assembled and no DIY.
sold out at the moment
Super Sixteen is a 64-step control voltage sequencer with gate, pitch, linear CV, and clock outputs, and a unique 2-handed programming interface that makes programming melodies, rhythms, an basslines a joy.Features:• Patch memory for 99 sequences• Up to 64 step sequence length• Selectable scales and swing timing• Intuitive motion recording• Per-step glide/portamento• Real-time rhythm and pitch effects like beat repeat, stutter roll, and randomization.• Code and hardware files are open-source for you to edit and experimentDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
available
The 4XXX Compressor is a audio tool inspired by the legendary British stereo bus compressor that has shaped the sound of countless hit records since the 1980s. Often referred to as the “glue compressor,” it helps your entire mix come together seamlessly, delivering a polished, professional sound heard on classic and modern albums alike.Perfect for mixing and mastering, the 4XXX Compressor adds punch, warmth, and cohesion—especially to drums, making them pump, breathe and groove.This module is the result of a collaboration between Feedback Modules and CMS-LAB.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
only 2 left
THE CP3MINUS is the 6HP SMD variant of CP3+ Mixer, minus the MULTI section.Features:• 4 mono analog input• 4 input level pots• 1 dual level pot• One inverting and one non-inverting output jacks• Standard 10 pin euro power (+12V / -12V)DIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.
available
This is probably the fastest envelope generator in Modularland.Why? Because it is based on the fastest one. The classic Japanese modular from the seventies everyone loves.Features:• 4 control pots:Attack, Decay, Sustain, Release• 1 gate switch: triggers ADSR cycle• 1 time switch: switches between fast and slow envelope times• one normal and one inverting output jack 10V peak• standard 10 pin euro power (+12V / -12V)DIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
This is an envelope generator based on the SMD AS3310. The AS3310 is a modern recreation of the classic Curtis CEM3310 chip, used in many famous mono and poly analogue synth from the eighties. We took the best ideas from all the classic 3310 circuits and tried to squeeze the maximum from this fantastic chip. The MODE switch takes this module beyond a simple ADSR type envelope generator.It can work as:• NORMAL - a conventional ADSR envelope,• DAMPED - an ADRR piano envelope approximation• AUTO - a short gate will cycle the envelope shaper through a complete ADR envelopeIt has an additional TRIGGER input which can be used for generating multiple peak envelopes.Features:• 4 control pots:Attack, Decay, Sustain, Release• 1 gate switch: triggers ADSR cycle• 1 mode switch: Normal (ADSR),Damp (ADRR),Auto (ASR)• 1re trigger input• standard 10 pin euro power (+12V / -12V)DIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.
available
This is an envelope follower based on a classic module from the seventies but with some improvements to suit modern needs.The IN signal is routed to the envelope follower circuit and also to a THRU output, so the original signal is also available for external processing.The envelope follower has three controls, a switch to select response time (fast, medium, slow), a pot to adjust GATE threshold and a pot to adjust the envelope CV level.This little module will help you shape the timbre and/or the level envelopes of your sounds. From dynamic envelope filtering to compressor like side chaining there are lots of possibilities to mangle your audio.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
HI-FUSION is a remake of the classic Polyfusion from the 70s with some improvements.It is a low pass OTA VCF based on the well known LM13700 ic.We chose to make this circuit because it's v/oct stable, and the trimmers allow to calibrate it properly.It has a switch for 2 pole and 4 pole configuration, each with it's own character and timbre.This design produces nice sounding filter fm results.Features:This kit contains all the parts needed to build a complete HI-FUSION module.• 1 audio input: IN• 1 audio level pot: ATT• 3 cv inputs: FREQ(with attenuator), FREQ (for v/oct), RESO• 1 cv level pot: FREQ CV (attenuator for FREQ cv input)• 2 vcf control pots: FREQ (frequency) and RESO (resonance)• 1 configuration type switch: 2P and 4P (2pole or 4 pole)• 1 output: OUT• standard 10 pin euro power (+12V / -12V)DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
only 1 left
The JP8 VCF module is a versatile and authentic filter offering 2-pole (12 dB/oct) and 4-pole (24 dB/oct) low-pass modes, along with a high-pass filter. Built with AS3109D and AS662A ICs, WIMA polypropylene capacitors, and 2SK30ATM-GR J-FET transistors, it ensures high-quality performance.Key features include two mixed signal inputs, independent outputs for 2-pole and 4-pole modes, and an alternate output with selectable modes via a switch. CV inputs operate at 0-5Vpp, with attenuation available for 10Vpp signals through the CV1 pot.This module is a collaboration between Feedback Modules and CMS-LAB.Features:• AS3109D and AS662A, ALFA RPAR modern identical to the original IC clones• High Pass Filter made with AS662A• WIMA polypropylene capacitors• Selected 2SK30ATM-GR N-channel J-Fet transistor• Two mixed signal inputs• Independent outputs for 2-pole, 4-pole and an alternate output with selection of modes from a switch• The CVs are 0-5Vpp, 10Vpp CVs can be attenuated with the CV1 pot.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
only 1 left
Lazer Phazer it's at his core 2xSystem7xx phaser with a lot of addons.It can work as a stereo phaser, as a mono BI-Phaser, as two totally independent phasers, or as a 16stages phaser in series mode. Thath's not all, the LFOs of the phasers can work idendepently or linked. In inverted mode for stereo phase galore. The feedback can be modulated by internal LFOs, external CVs or both of them in the same time.Kits have 16 x 2SK30A fet transistors matched and selected from new old stock, so the retro sound it's totally there.This module is a collaboration between Feedback Modules and CMS-LAB.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
only 1 left
This little module is an evolution of the LFO of the famous MS monophonic synth from the seventies, adapted to Eurorack.Features:• 2 control pots for FREQUENCY and WAVEFORM• 1 FREQUENCY RANGE switch: LOW and HIGHLOW - 18mHz (55sec)- 0,7Hz (81,4sec)HIGH - 0,63Hz (1,6sec) - 24Hz (42msec)• 2 outputs: SQUARE 0/10V Vpp and TRIANGLE -5/5V Vpp• Standard 10 pin euro power (+12V / -12V)DIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
Complex analogue LFO from a vintage Japanese modular system!We injected some steroids in this LFO and the results are lots of features.Not only can you use 8 individual waveform outputs, but you can also use thealternative two linked outputs for which you can select any of the waveforms.This alternative output has a VCA so you can fade in the LFO signal in adefined duration with a potentiometer.The stair-like waveforms can be changed from 16steps, 8steps, 4steps or mangled.All of these are seasoned with cv control and waveform reset.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
only 2 left
Complex analogue LFO in just 4HP!Waveshaped Square and Triangle output plus extra inverted Triangle output.Reset and gate function, multiple LFOs can be chained for complex gates and CVs.Very long LFO time on minimum setting, more than 1 min.Features:• 2X control pots for FREQUENCY and WAVEFORM• 1X FREQUENCY RANGE switch: LOW and HIGHLOW - 4,7mHz (210sec/3.5min) - 0,625Hz (1.4sec)HIGH - 183mHz (6sec) - 25Hz (40msec)• 1X MODE switch : STOP and RESET• 1X input jack : RESET• 2X outputs : SQUARE 0/10V Vpp and TRIANGLE -5V/5V VppDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
LinMix is a compact 6HP mixer suitable for audio signals and modulation CVs. It is DC coupled.Features:• 4 audio/cv inputs• 1 audio/cv output• 4 input volume/gain pots• 1 output level pot• Standard 10 pin euro power (+12V / -12V)DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.