DIY Kits
sold out at the moment
LO-FUSION is a remake of the classic Polyfusion from the 70s with some improvements. It is a low pass OTA VCF based on the well known LM13700 IC. We chose to make this circuit because it's v/oct stable, and the trimmers allow to calibrate it properly. It has a switch for 2 pole and 4 pole configuration, each with it's own character and timbre. This design produces nice sounding filter FM results.Features:• 1 audio input: IN• 1 audio level pot: ATT• 3 CV inputs: FREQ(with attenuator), FREQ (for v/oct), RESO• 1 CV level pot: FREQ CV (attenuator for FREQ cv input)• 2 VCF control pots: FREQ (frequency) and RESO ( resonance)• 1 configuration type switch: 2P and 4P (2pole or 4 pole)• 1 output: OUT• Standard 10 pin euro power (+12V / -12V)DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
Multi it's an 8 jack unbuffered multiple with front panel in black/gold Feedback style.It's separated in 2x4 sections with jack's 4 link going to jack 5.So you can use it as two independent multiples or one single 7 jack multiple.It uses PJ301BM jack, for a better strength of the module.This kit contains all the parts needed to build a complete MULTI module.No manual needed. All parts included, only through-hole (THT) parts to solder, no SMD parts.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
Sound Design channel strip based on a famous late eighties small mixer used by many electronic musicians for the techno sound of the nineties.Features:• 1 audio input• 1 gain pot• 2 EQ pots: low and hi• 1 output level pot• 1 audio outputDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
Sound Design channel strip based on a famous late eighties small mixer used mostly for the well known TB303 distortion sound.Features:• 1 audio input• 1 input gain potentiometer• 2 EQ potentiometers: low and hi• 1 output level potentiometer• 1 audio output• Standard 10 pin euro power (+12V / -12V) (works also at +15V / -15V)DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
Sound design channel strip based on a famous late seventies small mixer used by many electronic music bands.Features:• 1 Audio input• 1 Gain pot• 2 EQ pots - Low & Hi• 1 Output level pot• 1 Audio outputDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
This module is the result of almost a year of brainstorming to make a multipurpose sound destruction module.After checking several classic distortion/fuzz/overdrive/clipping circuits, we decided to blend several ideas in one module and give you enough options, so you can mangle your sound to your taste.The circuit blends direct clean sound with two different type of distortions.One circuit is a FET preamp based on a classic circuit of a mini portable cassette recorder & mixer combo from the eighties. It has variable gain and level control.The other circuit is based on classic guitar pedal distortion/fuzz with switchable diode or MOSFET distortion. This circuit also has variable gain and level control.The two distortion circuits are followed by a Baxandall two band equaliser (the one from our PRE-KM module) to shape the distorted sound to your pleasure.Finally the mangled (double distorted/clipped equalised) sound is blended with the clean sound for the right balance.This module sounds great on drums, bass synth or even acoustic sources. Enjoy your new sound shaping toy.On the technical side we took great care for the PCB design and although this is an SMD circuit board we decided to use through hole parts where we considered it matters (some capacitors and the FETs).DIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.
only 1 left
The smArTT Verter is a simple but very effective utility module for scaling the level and polarity of audio and CV signals.Features:• 1 audio/CV input• 1 input level potentiometer• 1 signal polarity switch (+/-)• 1 DC offset potentiometer (+/-5V or +/-10V)• 3 output jacksDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
4HP Compressor designed for continuous adjustment of gain, threshold and compression ratio with a single potentiometer. There is also a knob for input level and a knob for make-up gain. The module is based on high-performance THAT4305 Blackmer® VCA chip.Features:• 1 audio input (In)• 1 audio level pot (Input)• 2 control pots:Less/More = compression, Make-Up Gain• 1 output (Out)DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
Static module it's a comprehensive collection of noise sources generated with different methods.Features:• 2 control pots: MORPH, SPECTRUM• 1 switch: spectrum type TR/CHIP• 8 outputs: MSWHITE, MSPINK, ZNWHITE, ZNPINK, DARK, MORPH, TROUT, RNDVOLTDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
As the name suggests this module can produce sub frequencies of -1 and -2 octaves relative to the square wave signal provided at the input jack.But this is not just a simple SUB generator. It also has a little mixer that will let you add different levels of -1 and -2 octave signals to the original square wave. You can select the -2 octave signal to be a square wave or a pulse wave.The module has individual outputs for the mixed signal, the -1 octave and the -2 octave.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
Snappy nice colorful sound VCA. This is probably one of the snappiest and most colorful in sound VCA in Modularland. Why? Because it is based on the classic Japanese VCA from the seventies everyone loves.Most clones use CA3080 or LM13700, this use the original clone of BA662A made by Alfa RPAR. This VCA will give the classic rubbery sound of the modular, SH and JP series.Also check ENV100, together are the perfect combination.Features:• 3 controls: input, gain, CV attenuator• 1 switch: linear or logarithmic• 3 connectors: audio in, audio out, CV inDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
only 2 left
VCA2600 needs no introduction. The best sounding VCA in 4HP with matched and thermo coupled transistors.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
This filter is based on the classic 2600 from the seventies and uses the LM3900 Norton opamp chip.It has an audio inputs, two CV ins and an audio out.You can control audio input level, CV levels, frequency cutoff and resonance.It has a beautiful sound and it can go from relatively clean to dirty and screamy depending on audio signal level and resonance.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
The VCZIII voltage controlled oscillator modules are our latest creation and are based on the VCOs of one of the most revered analog instruments, the famous British pin matrix synth released in 1969.The VCZIII series VCO is a result of the collaboration of Feedback modules and CMS-LAB and is a modern re-creation of those temperamental, organic and beautiful sounding VCOs from 1969 but with enhancements and adaptations to the Eurorack needs of 21st century.There are two type of VCOs, VCZIII A based on VCO1 with variable shape SINE & SAW waveforms, VCZIII B based on VCO2 & VCO3 with variable TRIANGLE & PULSE waveforms.Also, each VCO comes in two versions, one with normal fine tune potentiometers and one with precision multiturn potentiometer.THIS VERSION IS WITH NORMAL FINE TUNE POTENTIOMETER.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
only 2 left
The VCZIII voltage controlled oscillator modules are our latest creation and are based on the VCOs of one of the most revered analog instruments, the famous British pin matrix synth released in 1969.The VCZIII series VCO is a result of the collaboration of Feedback modules and CMS-LAB and is a modern re-creation of those temperamental, organic and beautiful sounding VCOs from 1969 but with enhancements and adaptations to the Eurorack needs of 21st century.There are two type of VCOs, VCZIII A based on VCO1 with variable shape SINE & SAW waveforms, VCZIII B based on VCO2 & VCO3 with variable TRIANGLE & PULSE waveforms.Also, each VCO comes in two versions, one with normal fine tune potentiometers and one with precision multiturn potentiometer.THIS VERSION IS WITH BOURNS MULTITURN FINE TUNE POTENTIOMETER.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
The VCZIII voltage controlled oscillator modules are our latest creation and are based on the VCOs of one of the most revered analog instruments, the famous British pin matrix synth released in 1969.The VCZIII series VCO is a result of the collaboration of Feedback modules and CMS-LAB and is a modern re-creation of those temperamental, organic and beautiful sounding VCOs from 1969 but with enhancements and adaptations to the Eurorack needs of 21st century.There are two type of VCOs, VCZIII A based on VCO1 with variable shape SINE & SAW waveforms, VCZIII B based on VCO2 & VCO3 with variable TRIANGLE & PULSE waveforms.Also, each VCO comes in two versions, one with normal fine tune potentiometers and one with precision multiturn potentiometer.THIS VERSION IS WITH BOURNS MULTITURN FINE TUNE POTENTIOMETER.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
only 1 left
The VCZIII voltage controlled oscillator modules are our latest creation and are based on the VCOs of one of the most revered analog instruments, the famous British pin matrix synth released in 1969.The VCZIII series VCO is a result of the collaboration of Feedback modules and CMS-LAB and is a modern re-creation of those temperamental, organic and beautiful sounding VCOs from 1969 but with enhancements and adaptations to the Eurorack needs of 21st century.There are two type of VCOs, VCZIII A based on VCO1 with variable shape SINE & SAW waveforms, VCZIII B based on VCO2 & VCO3 with variable TRIANGLE & PULSE waveforms.Also, each VCO comes in two versions, one with normal fine tune potentiometers and one with precision multiturn potentiometer.THIS VERSION IS WITH BOURNS MULTITURN FINE TUNE POTENTIOMETER.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
The VCF from the famous British pin matrix synth released in 1969.The VCZIII series VCF is a result of the collaboration of Feedback modules and CMS-LAB and is a modern re-creation of those temperamental, organic and beautiful sounding VCF from 1969 but with enhancements and adaptations to the Eurorack needs of 21st century.Features:• AS394 ultra well-matched monolithic NPN transistor pair• selected and matched BC550 and BC560 transistor pairs• WIMA capacitors• selected 2N3819 FET transistor• two mixed signal inputs• the CVs are 0-5Vpp, 10Vpp CVs can be attenuated with the CV1 pot and RESO CV potDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
only 2 left
Akropoli is an extension and enhancement of our successful Little Melody and High Towers modules, offering the features of both of these modules as well as some of it’s own unique features such as mute buttons per channel, manual transpose knob and 1V/oct transpose CV input. Akropoli operates using our proprietary TOOL V2 code, and can count in integers as well as multiples for even more subtle and evolving variations:• top of the dial is /1• clockwise from the top are /2, /4, /8, /16, /32, /64, /128• anticlockwise from the top are /3, /5, /6, /7, /9, /10, /11Akropoli is a generative sequencer based around clock divisions and a chromatic quantiser, used to create in-the-moment licks and riffs. It is more that the sum of it’s parts.Akropoli’s internal operations can be considered as 4 clock dividers patched into a CV mixer via attenuators. The attenuators select notes over a 5 octave range, the clock dividers determine how often those notes are added to the mix. The final output of Akropoli is quantized chromatically for fast set up and continuously pleasing results. Akropoli has an onboard transposition knob, as well as a 1V/oct transposition CV input.The 4 clock dividers are labelled A, B, C, and D. They all receive clocks from the same source, the divisions may be selected using the presets and the individual division selectors. The clock dividers can be set to count up, down, or to one of a variety of modes that move between counting up and down. For further information on Presets and Modes see the Little Melody User Guide.Additionally, each clock divider has it’s own binary output (either high or low), these 4 outputs can be used to clock/gate/trigger other stuff on other modules to great effect.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
Berlin School is based around the classic CD4017 Johnson counter chip, under the control of a 16F1765 PIC which provides a few novel features.So what can Berlin School do? Well, it’s lots of fun, and far more fully featured than any old Baby 8, courtesy of being under PIC control. For example:you can externally control the length of each individual step via the DIV.CV input socket, by using another CV source, such as another Berlin School, an LFO, or evena sample and hold module – so any step can last for any clock length from 1 through to 8.You can externally control transposition of Berlin School via the TRANS.CV input socket, by using an external controller, such as another Berlin School (running at a slower speed), a 1V/oct keyboard (love this!), of any other CV source such as Little Melody for example.You can also do both of the above manually by using the DIV knob and the TRANSPOSE knob.Live tweaking of note information for each step in real time, secure in the knowledge that everything is accurately quantised.Berlin School has a 5 octave range (0V to 5V). A fun little feature is that if you’re running a sequence and then transpose it, any notes which end up beingtransposed above 5V are transposed down by one octave (rather than ‘clipping’ against the 5V ceiling), thus preserving the melody!All told, it’s hands on, tweakable, and lends itself perfectly to on-the-fly live use courtesy of the variations that are available from the use of the onboarddivider, transposition features and quantiser.Berlin School is perfectly partnered with Little Melody, and can be clocked and reset from an suitable external controller.Features:• 8 inputs (1 through to 8), each with micro-attenuators (which can be set with a small screwdriver)• 8 buffered inverted outputs (A through to H) which are 180o out of phase with the inputs• 8 buffered normal outputs (A through to H) which are in phase with the inputs• A switch matrix of 64 push on/push off switchesDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.