DIY Kits
sold out at the moment
Knapplåda is a DIY case with 104 HP space for your modules, a busboard with 16 bus-connectors and ~1 Ampere on +12V, -12V and +5V. The cover also acts as a stand, so you have your modules placed in a nice angle in front of you.It is your perfect entry into the modular world without spending much cash on power supply and case. Who did some research on that topics knows that it quickly gets complicated and expensive. Our answer: just get an all-in-one solution and focus on music instead of tech stuff! Here is Knapplåda!The DIY kit includes all materials you need to build the case. On top of that you will need some tools. You need solder- and woodworking skills. We think it will take around one or two evenings to build it for most of you. Please make sure to check the building instructions before you buy the kit. We put a lot of effort in this project and we hope you like it!Features:• 104 HP• Including busboard & power supply• Cover/stand included• Slide nuts or threaded strips (M3) can be inserted from the side• ~1 Ampere each on +12V/ -12V/ +5V• Find more specs in the manualDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
Microphonic Playground is the newest addition in our series of sound design instruments. Like its bigger sister, the Microphonic Soundbox, it's a playground for sonic exploration of any kind. It can also be your inexpensive entry into the Soundbox world before you possibly upgrade later.It works through body sound transmission on basis of a contact microphone. In comparison to airborne sound transmission (via a microphone), all sounds created on the box can be listened to in a very intimate and direct way. Imagine it like listening to the materials from the inside, very much in an ASMR way.The difference to the Microphonic Soundbox are two things:1) It is passive, has no active amplification and needs no power supply.2) It's an open playground with no audio sources or objects built into it, so you are free to attach everything to it what you can imagine.To get you started with ideas we now offer a variety of add-ons, that can be used with both the Microphonic Soundbox and the Microphonic Playground.The unit has an audio input and an output. Its audio output can be amplified by the external input of a Microphonic Soundbox and therefore act as an extension. Or it can be amplified by any pre-amplifier, mixing desk or audio interface. Multiple Playgrounds can be cascaded in series. Play it on its own, or extend your Microphonic Soundbox with one or two Playgrounds and some of the new add-ons.You're free to use it as a platform for sonic experimentation or just convert it into a Bass Kalimba, for example, and leave it that way. Please choose your own way to play with it and let your imagination and creativity guide you.Features:• built in contact microphone• passive, no power supply needed• many mounting possibilities for add-ons through five threaded M3 strips• universal wooden object holder on the side• four M3 thumb screws included• 1 audio input, 1 audio output• multiple units can be linked• soft rubber feet• 162 mm x 147 mm x 60 mm (w/d/h)• 0,244 kg
available
The Microphonic Soundbox is an instrument for experimental sound creation. It features a resonant wooden body equipped with contact microphones, battery-powered low-noise preamps and a variety of sound-generating surfaces, including springs, rods, textured panels and a kalimba. Use it standalone to create textures and samples or pair it with delay and loop-based effects for evolving soundscapes.The Instrument features a range of playable surfaces and objects that allow the creation of unheard sounds and textures. The main components are:• Two metal rods – you can excite them with a stick or similar to get bell-like sounds, or play them with a bow to create ethereal–metallic tones. Pitching recordings down reveals deep metallic drones.• Three metal springs – pluck, pull or whip them to produce vintage reverb-like spring sounds.• Sandpaper surface – scratch it with different objects and materials to create sounds ranging from soft whispering to harsh scraping noises.• Kalimba with 5 strips – play harmonic melodies or use the freely tunable mechanism to explore microtonal tunings. Transposing these recordings down can create low bass patterns.The Soundbox is designed to be modular, featuring M3 threaded strips that allow additional objects to be attached using thumb screws.To pick up the vibrations created by the surfaces and objects, two contact microphones are built into the instrument. One is placed at the centre for the kalimba, rods, springs and sandpaper. The second is positioned at the side to capture sounds from attached objects.The internal preamp is specially designed to amplify contact microphones, delivering low-noise amplification with precise detail – allowing you to boost even the smallest and quietest objects and turn them into cinematic, gigantic soundscape.Two Channels, One Input, Two OutputsThe Microphonic Soundbox offers two independent amplifier channels and a 1/4″ input for external contact microphones, enabling extended routing options. The Microphonic Playground can serve as an extension as well to multiply your sonic possibilities.Output 1 provides a mono mix of both channels. Using Output 2 alongside Output 1 splits the channels, allowing the Soundbox to be played on one output while the second one functions as an amplifier for an external contact microphone.Expand the Soundbox with Add-ons for New Sonic DimensionsThe Microphonic Soundbox is designed for experimentation and for playing with different objects, materials and surfaces. You are free to use whatever you like to develop your own signature sounds. To help you get started, we’ve developed several Add-on Packs that create interesting sounds straight out of the box.Features:• Two channels with internal contact microphones• Battery powered low noise pre-amps (~100x / ~40dB Gain)• Two outputs: mixed mono or channels separated• Channel one can act as pre-amp for external input• Multifunctional holder, based on M3 threaded strips (left side & under Kalimba)• Removable Kalimba• Soundbox is a hub for external contact mics: use channel 1 as pre-amp on out 1 while play the actual Soundbox on out 2• Output features an attenuator switch• Power management switches the LED from blue to red when battery goes under 7 volt• Soft grip rubber feet for acoustic decoupling• Removable metal rods which come in a plastic tube which is great for transpor
available
The MLT Passive Multiple is a 1 input to 6 output or 2 input to 3 output signal multiplier. If nothing is patched into input 2, it is normalized to input 1. As the device is passive, it can also be used to combine signals. For example 3-to-1 or 6-to-1. This DIY kit is very beginner friendly.Passive module, no power required.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
only 2 left
The MLT Passive Multiple is a 1 input to 6 output or 2 input to 3 output signal multiplier. If nothing is patched into input 2, it is normalized to input 1. As the device is passive, it can also be used to combine signals. For example 3-to-1 or 6-to-1. This DIY kit is very beginner friendly.Passive module, no power required.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
Noisefoc is an experimental Oscillator, good for noise and Pan Sonic style buzz sounds. It's nice as a pure sound source or as a base for Hi-Hat and percussion sounds. Noisefoc is a great learning project, in the manual the basic parts and their functions are explained. It is based around three CMOS NAND gates as oscillators, controlled by potentiometers and a light dependent resistor (LDR). There's an optical representation of the frequencies via LEDs, two mixing circuits (different sound via diode or resistor mixing) to mix the oscillators and a power starving function which makes the device completely out of control. It features a CV input (no 1V/Oct) for pitch influence via optocoupler.The frontpanel was designed by Hannes Pasqualini / Papernoise.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
VCO-1 (v1.4) is a purely analogue VCO for the modular Eurorack system. It can complemented by EXP-1 Expander module to add many functions like Sync, lin. FM, Wave Morphing, LFO etc. VCO-1 is temperature stable and provides a clean 1V/oct tracking over minimum 4 octaves. VCO-1 and EXP-1 are a powerful combination of modules with lots of instant fun! High quality parts, switches, pots and knobs, good feeling and big enough for comfortable everyday work, no fiddly controls. Check out the module on Modular Grid. https://www.modulargrid.net/e/leafaudio-vco-1Check buttons below for a build video about VCO-1 and EXP-1 by Synth DIY guy. Very nice to watch before you build it, specially for beginners. And make sure to check the Soundcloud audio demos - they're good!Controls:• Tuning (Coarse) ca. 20Hz - 20kHz• Tuning (Fine) ca. 8 half tones• Pulsewidthmodulation (PW)Connectors:• 1V/oct input for CV-controlled pitch• PWM input for CV-controlled pulsewidth• Pulse audio output• Saw audio outputAfter finishing it, the 1V/oct tracking has to be adjusted, what might need some experience.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
D3MIX by Maffez is a passive triple level-module that lets you route signals between different paths in a clever way.First, your signal is routed between ground and a point "b", allowing you to cover simple tasks like signal starvation, attenuation, splitting and passive mixing. With creative patching you can also do some pretty interesting things like asymmetric modulations, which is illustrated and explained in more detail in the manual.Another mode lets you control between individual channels and a common "node", creating multiples in a flash, realising a 3-1 mixer or a 1-9 distributor. Experimental or pragmatic? Definitely both, and fun either way!Read more info and hear audio demos on the Maffez website. https://maffez.com/?page_id=2872Maffez developed this module in dialogue with Pedro Eustache, who uses some of the gizmos in his rack during the show "The World of Hans Zimmer" and the soundtracks of "The Mandalorian" and "Avatar: The Way of Water". Maffez said he would like to donate part of the income from the module to Omas for Future.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
only 2 left
Farb Highpass is an analog transistor ladder highpass filter, and features a distinct circuit from the classic lowpass ladder. We tweaked the circuit and added CV-able resonance to the feedback path.We also added a Tilt EQ. It lets you either bring some of the warmth back in, or double down on the highpass and go all sizzly.We have always been fascinated with analogue effects circuits, and we love the way their quirks and nonlinearities inspire us to find new sounds.Farb Highpass features a distinct circuit from the classic lowpass ladder. We tweaked the circuit and added CV-able resonance to the feedback path. This module crosses the sonic richness of the classic East Coast highpass ladder filter with added fine control from its weighted input stage.It is part of our Farbfilter (colour filter) range of sound colouring modules, offering a wide sonic palette from lending glowing warmth to electric sizzle in 4 HP.Farb Highpass is designed to be an easy, beginner-friendly DIY build you can solder yourself.Features:• Classic analog circuit: Transistor Ladder Highpass Filter.• CV and Offset for Low Cut.• CV and Attenuation for Resonance.• Tilt EQ to add bass or sizzle.• Backlit panel offers instant visual feedback over CV.• Flip panel: with or without number.DIY-Kit-Type:Semi-DIY-Kit. Most of the components are completely ready, you only have to assemble panel, knobs and some screws/washers.
available
Farbfolder is an analog wavefolder for Eurorack, designed to add harmonically related overtones to an audio signal.We have always been fascinated with analogue effects circuits, and we love the way their quirks and nonlinearities inspire us to find new sounds.Farbfolder does this weird and wonderful trick of folding up the wave at the zero points, "squaring" a sine off with more and more sinusoid edges, thus adding odd harmonics.This module is excellent at adding rich harmonics to a basic waveform. Its circuit can produce characteristic timbres similar to pulse-width and frequency modulation.It is part of our Farbfilter (colour filter) range of sound colouring modules, offering a wide sonic palette from lending subtle colour to rich timbre bending tones in 4 HP.Farbfolder is designed to be an easy, beginner-friendly DIY build you can solder yourself.Features:• Classic analog West Coast circuit: odd harmonics Wavefolder.• Offset and Attenuation for Fold CV for flexible modulation.• Bias Folding: Offset Audio input with CV.• Push Bias into dead zone for VCA-like use.• Backlit panel offers instant visual feedback over CV.• Flip panel: with or without number.DIY-Kit-Type:Semi-DIY-Kit. Most of the components are completely ready, you only have to assemble panel, knobs and some screws/washers.
available
Farbshaper is a classic West Coast analog waveshaper for Eurorack, designed to shape the overtones of an audio signal with two voltage controlled stages.We have always been fascinated with analogue effects circuits, and we love the way their quirks and nonlinearities inspire us to find new sounds.Farbshaper is based on a classic circuit that turns a ramp into a sine, and was historically used in function generators and oscillators. On any other signal it will add one or multiple wave folds.The circuit produces opposite offsets internally, so the knob settings interact strongly and are fun to automate with CV.This module is excellent to use as a non-linear shaper for acoustic and electronic sounds, ranging from gentle timbral transformation to colourful wavefolding.It is part of our Farbfilter (colour filter) range of sound colouring modules, offering a wide sonic palette from lending subtle colour to rich timbre bending tones in 4 HP.Farbshaper is designed to be an easy, beginner-friendly DIY build you can solder yourself.Features:• Classic analog West Coast circuit: multi stage Waveshaper / -folder.• CV and Attenuation to control first single Fold stage.• CV and Attenuation to control Pleat, a second dual Fold stage.• Internal CV offset creates dead zones for VCA-like use.• Backlit panel offers instant visual feedback over CV.• Flip panel: with or without number.DIY-Kit-Type:Semi-DIY-Kit. Most of the components are completely ready, you only have to assemble panel, knobs and some screws/washers.
available
Multiplikand is a compact routing utility module for Eurorack in 6HP. It takes Audio and CV, with optional DC filtering.At its core, Multiplikand offers four active precision multiples. Clever normalisation and a switch allow you to configure how the signals are summed.The module has pin headers in the back so you can break out from prototyping platforms like Arduino, Teensy, Daisy and Bela to Multiplikand's inputs with jumper wires.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
available
Tausend dB is a four channel amplifier module for Eurorack in 6HP, allowing you to boost Audio and CV.Tausend dB works great for bringing line signals to Eurorack levels, and saturating Eurorack levels into overdrive. We love feeding piezo signals into Eurorack with it.The module has pin headers in the back so you can break out from prototyping platforms like Arduino, Teensy, Daisy and Bela to Tausend dB's inputs with jumper wires.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
available
DivSkip is a 4 Channel Trigger and Gate Processor, with loads of great modes. Bernoulli Gates, Clock Division, Turing, Euclidean Split, Euclidean Classic, Ramp / Gate Length, Retrigger and Pattern.Plug in triggers or gates from a clock, logic module or sequencer and generate new rhythms and variations. Modes include Probability, Clock Division, Turing, Euclidean, Retrigger, Gate Delays and 64 step preset patterns.Features:• 4 Channels of Triggers or Gates• push-to-mute• 8 modes per Channel• LED rings for visualizationDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
only 2 left
nexusMIDI is a 6HP Eurorack phybus expander that adds four classic DIN MIDI ports to connected midiphy modules such as zetaSID. With two MIDI inputs and two MIDI outputs in standard 5-pin DIN format, it makes it easy to connect external keyboards, controllers, sequencers, DAWs and MIDI hardware to a phybus-based modular setup.Designed as the central MIDI gateway for zetaSID and other phybus instruments, nexusMIDI enables polyphonic MIDI keyboard control, MIDI clock synchronization, modulation via pitch bend and mod wheel, velocity-sensitive dynamics, SysEx patch transfer and ASID SID-file playback. In combination with multiple zetaSID modules, it turns a phybus instrument cluster into a classic MIDI-controlled polyphonic synthesizer with up to six stereo voices.The module uses reliable standard MIDI circuitry for stable communication, even with longer MIDI cables. MIDI data can be routed through the phybus network using virtual patching, reducing cable clutter while keeping connected modules flexible and recallable. Status LEDs provide clear visual feedback for MIDI activity and available ports, making nexusMIDI practical in both studio and live setups.With its high-quality milled aluminium front panel, compact 30mm depth and standard Eurorack power connection, nexusMIDI is a focused expansion module for musicians who want to integrate zetaSID and phybus systems with traditional MIDI workflows.Features• 6HP Eurorack MIDI expander for phybus systems.• Adds 2 × MIDI In and 2 × MIDI Out via standard 5-pin DIN ports.• Designed for zetaSID and other midiphy phybus modules.• Enables polyphonic MIDI control of zetaSID clusters.• Supports MIDI clock sync for arpeggiators, LFOs and wave sequencers.• Routes pitch, gates, triggers and modulation via phybus.• Supports pitch bend, mod wheel and velocity-based control.• Sends arpeggios, SysEx patch data and MIDI messages to external gear.• ASID over SysEx support for SID-file playback with zetaSID.• Status LEDs for MIDI activity and port feedback.• High-quality milled aluminium front panel.• Power consumption: +12V 90mA, no −12V or 5V required.• Up to 15 nexusMIDI units per bus expansion, 60 physical MIDI ports total.
available
zetaSID is a compact 4HP Eurorack synthesizer voice that brings the legendary SID sound into a modern modular format. Based on the MIDIbox SID synthesis engine, it offers deep digital sound design, animated OLED visual feedback and powerful expansion through the midiphy phybus system.A single zetaSID works as a monophonic CV/gate-controlled SID voice, while multiple units can be linked into a larger polyphonic instrument. With nexusMIDI and phybus expansion, zetaSID can grow into a full MIDI-controlled synthesizer with up to six stereo voices, while unused CV and gate inputs can be reassigned as additional modulation sources.The sound engine includes six LFOs, two advanced envelopes, eight modulation paths, four wave sequencers, three oscillator arpeggiators and a 24 × 14 trigger matrix. This allows everything from classic chiptune tones and animated arpeggios to acid-style basslines, evolving digital textures and percussive C64-inspired sounds. zetaSID also includes Lead, Bassline and Drum engines, giving it a wide range of synthesis options in a very small footprint.The integrated OLED display visualizes oscillator outputs, arpeggio patterns, filter curves and other sound parameters, making patch editing more immediate. Thanks to phybus UI cooperation, multiple zetaSID modules can work together as one expanded interface, with different units controlling different parts of the same patch.zetaSID ships with 100 preset patches in its internal ROM bank and supports optional microSD storage for session recall and patch handling. With its milled aluminium front panel, compact depth and strong modular connectivity, zetaSID is a powerful SID-inspired Eurorack voice for chiptune, basslines, drums, experimental synthesis and expandable polyphonic setups.Features• Compact 4HP Eurorack SID synthesizer voice.• Based on the MIDIbox SID synthesis engine.• Monophonic CV/gate control or expandable polyphonic MIDI setup.• phybus expansion for multi-unit linking and UI cooperation.• Up to six stereo voices with 12 linked zetaSID modules.• Lead, Bassline and Drum sound engines.• Six LFOs, two envelopes and eight modulation paths.• Four wave sequencers and three oscillator arpeggiators.• 24 × 14 event trigger matrix for deep sound design.• Animated OLED display for oscillator, filter and pattern visualization.• 100 factory ROM patches included.• Optional microSD support for saving and recalling sessions.• CV input, gate input and Eurorack audio output.
available
The MAT 16X8 is an extremely compact ultra light audio and MIDI interface for mobile live setups, hardware synthesizers, drum machines, modular systems and external effects units. With 16 inputs, 8 outputs and extensive MIDI connectivity, it offers a flexible solution for performance, recording and complex routing in a format that fits easily into any mobile setup.In combination with a computer, iPad, MPC or any other USB Audio Class 2.0 compatible host system, the MAT 16X8 can be used via the host software as a performance mixer, multitrack recorder, effects routing hub or compact studio interface. For modular systems, a level converter may be required depending on the application.The interface operates at 24-bit resolution with sample rates of up to 96 kHz and high-quality converters offering up to 110 dB signal-to-noise ratio. Thanks to its Direct-In concept without additional preamps, the noise floor remains especially low, making it ideal for line-level signals from synthesizers, grooveboxes and drum machines. The very low roundtrip latency of up to 3.7 ms ensures a direct playing feel for live performance and recording.Measuring only 222 × 60 × 11 mm and weighing just 135 g, the MAT 16X8 is exceptionally lightweight and space-saving. It is powered directly via USB and requires no external power supply. The 16 inputs and 8 outputs are provided through robust 3.5 mm TRS stereo jacks, with enough spacing for common connectors. Standard Y-cables can be used for 6.3 mm jack connections or mono signals.An adjustable headphone amplifier with pre-listening function allows separate monitoring of output 1/2 or 3/4. For MIDI setups, the interface provides a TRS-A/B auto-sensing MIDI input and two independently addressable TRS-A MIDI outputs, making it easy to integrate more complex devices or create separate clock routings.The DC-coupled outputs allow CV control in the range of ±2.5 V, expanding the interface for modular applications. The reduced, robust PCB design without a traditional enclosure keeps weight and height to a minimum, while synthetic rubber bands serve as scratch and slip protection and help with cable management. Design, development, final assembly and testing are carried out in Germany.Features• 16 inputs and 8 outputs in an ultra-compact format.• USB Audio Class 2.0 compatible and bus-powered.• 24-bit audio with up to 96 kHz sample rate.• High-quality converters with up to 110 dB SNR.• Direct-In concept for a low noise floor with line-level signals.• Very low latency of up to 3.7 ms roundtrip.• 8 TRS 3.5 mm stereo inputs for 16 input channels.• 4 TRS 3.5 mm stereo outputs for 8 output channels.• Adjustable headphone amplifier with pre-listening function.• TRS-A/B auto-sensing MIDI In and 2 × TRS-A MIDI Out.• DC-coupled outputs for CV applications up to ±2.5 V.• Compatible with iOS, macOS, Windows, Linux and many standalone hosts.• Only 222 × 60 × 11 mm and 135 g.• Designed, developed, assembled and tested in Germany.
sold out at the moment
A-RYTH-MATIK Eurorack sequencer with its 6-channel gate/trigger outputs. This 6HP module delivers complex Euclidean rhythms through an intuitive interface, featuring a 128x64 pixel OLED display and a Rotary encoder. Alternative firmwares like Bit Garden, Time Bandit, and Uncertainty, makes it a playground for musical experimentation.Designed for performance and community hackability.Features:• 6 outputs with LED indicators• External Clock (TRIG IN) and Reset Trigger (RESET)• 128x64 pixel 0.96” OLED Display• Rotary encoder with push button• Alternative Firmware Options and flip panel for mounting the module upside down.Alternative Firmware Options:• nEuclidean• Gate Sequencer with auto Mode• Bit Garden• Euclidean - Pam's style• Time Bandit• UncertaintyDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
only 1 left
MULTVERT is a high-quality buffered multiple designed to provide extended functionality in a sleek, ultra-compact form factor. Developed with passion and precision at Modulove, this module enhances the standard buffered multiple concept, offering an innovative approach to signal distribution. MULTVERT combines reliability with creative potential, proving that even simple tools can be improved for a more inspiring experience.Features:• 40mA +12V Rail 40mA -12V• 2 Buffered input Channels• 2 Buffered Bipolar LEDs (green = positive, red = negative)• Reverse Polarity Protection• 1 Channel with 4 buffered copies• 1 Channel with 2 buffered copies and 1 inverted copy• Normalisation of channel 1 to channel 2DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
MVMNT is a versatile Eurorack module designed to infuse your patches with dynamic, smooth random modulation. Based on the original HAGIWO design, it offers precise control over the shape, intensity, and randomness of your CV, creating unpredictable yet musical results. With features like a smooth Bezier curve, adjustable frequency, and multiple firmware options, MVMNT introduces rich modulation possibilities including Perlin noise, ADSR, and generative CV sequencing.Features:• Precise control over the shape and rate of smooth random modulation• Adjustable intensity for fine-tuning randomness• Track & Hold• Additional inverted and Bipolar Outputs.• Alternative Firmware Options and Dual-Panel Design by bkrsmdesign, featuring the original SYNC MOD LFO on the backside.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.