DIY Kits
sold out at the moment
Della is a compact 3 HP expander module for the Eurorack DIY version of Scrooge. It’s a fully passive breakout that provides individual outputs for all 8 sequencer tracks via dedicated sockets.The module connects to a header on the back of Scrooge and is designed specifically for the Eurorack version – this header is not accessible on the desktop unit.Features:• Eurorack expander for the Scrooge sequenced malfunction generator• Breaks out all 8 sequencer tracks via individual output sockets• Designed for the Eurorack version of Scrooge• Simple ribbon cable connection to back-panel header• Not compatible with the desktop version of ScroogeDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
available
Elmyra 2 is a 4-voice digital/analog hybrid platform for microtonal sonic exploration, capable of creating anything from lush ambient soundscapes to gritty droning textures and shrieking noises, available as a 42 HP Eurorack module or semi-modular desktop synth. With 31 modulation targets, 4 polymetric sequencers, delay, additional per-voice effects, a choice of various filters, as well as onboard LFOs and utilities, it is essentially a purpose-built small modular system in itself. A set of preset cards (included) or electronic components like capacitors or diodes can be plugged into the front panel in order to change the sound character.Features:• 4 independent voices activated by touch or CV• wavetable-based complex oscillator engine, up to 12 oscillators in total, 1V/octave compatible• chromatic mode makes chords and harmonic sounds possible, microtonal scales supported• 41 patch points• 31 modulation targets• touchpads with analog envelopes that can be used as modulation sources• resonant filter switchable between:• boomy and aggressive multimode 2-pole state variable filter (low-pass, band-pass, high-pass)• creamy 4-pole low-pass ladder filter• delay with unhealthy amounts of feedback• lo-fi reverb• analog OUCH circuit: a unique combination of destructive distortion, waveshaping and filtering• sonic character can be customised by using special preset cards (set of 4 included) or components like diodes that can be plugged into the front panel• preset cards can be used with other Neutral Labs modules• external audio can be processed via audio input• 9 per-voice modulations and effects:• unison detune• dual sub-oscillators• saturation• bitmangler• sample rate reduction• noise• high-pass filter• low-pass filter• 2 LFOs: 1 sine, 1 complex morphable• 4 sequencers with arbitrary step length per voice (up to 128), allows polymetric structures• delay time and LFOs can be clock-synced or unsynced (tap tempo is also possible)• utilities• dual attenuator/buffered multiple/voltage generator• CV summing circuit• solid bamboo wood case• boutique synth handmade in GermanyDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
available
Elmyra 2 is a 4-voice digital/analog hybrid platform for microtonal sonic exploration, capable of creating anything from lush ambient soundscapes to gritty droning textures and shrieking noises, available as a 42 HP Eurorack module or semi-modular desktop synth. With 31 modulation targets, 4 polymetric sequencers, delay, additional per-voice effects, a choice of various filters, as well as onboard LFOs and utilities, it is essentially a purpose-built small modular system in itself. A set of preset cards (included) or electronic components like capacitors or diodes can be plugged into the front panel in order to change the sound character.Features:• 4 independent voices activated by touch or CV• wavetable-based complex oscillator engine, up to 12 oscillators in total, 1V/octave compatible• chromatic mode makes chords and harmonic sounds possible, microtonal scales supported• 41 patch points• 31 modulation targets• touchpads with analog envelopes that can be used as modulation sources• resonant filter switchable between:• boomy and aggressive multimode 2-pole state variable filter (low-pass, band-pass, high-pass)• creamy 4-pole low-pass ladder filter• delay with unhealthy amounts of feedback• lo-fi reverb• analog OUCH circuit: a unique combination of destructive distortion, waveshaping and filtering• sonic character can be customised by using special preset cards (set of 4 included) or components like diodes that can be plugged into the front panel• preset cards can be used with other Neutral Labs modules• external audio can be processed via audio input• 9 per-voice modulations and effects:• unison detune• dual sub-oscillators• saturation• bitmangler• sample rate reduction• noise• high-pass filter• low-pass filter• 2 LFOs: 1 sine, 1 complex morphable• 4 sequencers with arbitrary step length per voice (up to 128), allows polymetric structures• delay time and LFOs can be clock-synced or unsynced (tap tempo is also possible)• utilities• dual attenuator/buffered multiple/voltage generator• CV summing circuit• case made of plant-based bioplastic and native German oakwood• boutique synth handmade in GermanyDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
available
This is the DIY Desktop version of this unit.Logic, Unbound. Meet Luna. The first serious Lunetta synthesizer.Look beyond clean waveforms and predictable polyphony. Luna takes you back to a time when digital didn’t mean perfect. It meant raw. Inspired by the subterranean DIY culture of the 70s and 80s, Luna is a love letter to the Lunetta machines of old – living, breathing organisms built from CMOS logic chips. But where those machines were fragile experiments, Luna is a weaponised instrument of sonic confusion.The Nervous System Exposed. True to the Neutral Labs philosophy, we don’t believe in hiding the magic behind an opaque faceplate. Luna features exposed CMOS inputs and outputs directly on the front panel. You're not simply patching cables – you are rewiring the brain of the synthesizer itself. Combine signals, bend logic, and physically intervene in the computation to create sounds that shouldn’t exist.Rhythm is Timbre. Timbre is Rhythm. In the world of Luna, there is no difference between a sequencer and an oscillator. The same digital pulse that drives a bass line can be accelerated into a screeching lead or folded into a metallic drone.Five oscillators provide the raw material. A chaotic array of logic blocks (XOR, NOT, AND, shift registers, counters, multiplexer) chews up those signals and spits out complex, evolving mathematical noise.Taming the Digital Mess. Raw logic can be harsh. To turn this binary chaos into music, Luna feeds its digital soul through three organic low-pass gates. These analogue circuits impart a natural decay and percussive punch to the madness, transforming mathematical errors into bongos, plucks, and thumping basslines.Drench it in Atmosphere. Once you’ve constructed your signal, destroy it again. Luna comes equipped with a suite of effects – distortion, delay, reverb, chorus, bitcrusher, phaser and more – to smear your logic into a wash of ambient bliss or gritty industrial texture.Features:• 5 oscillators• Logic gates (2 XOR, 2 NOT, 2 AND)• 5 logic blocks (5-step ring counter, 4-bit binary counter, 2 shift registers, 4-channel multiplexer)• 3 touchpads that generate logic signals• 3 channels for audio manipulation (low-pass gates with adjustable decay and switchable trigger mode, gain, tilt EQ)• 13 audio effects freely assignable to 2 effect slots running in series (drive, delay, reverb, 6 filter types, bitcrusher, phaser, chorus, comb filter)• CV control for effects and 2 oscillators• MIDI control over 2 oscillators, all 3 low-pass gates, and 3 logic outputs• 2 sequencers with up to 64 steps, syncable to clock or MIDI• Headphone-compatible audio outputDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
available
This is the DIY Eurorack version of this unit.Logic, Unbound. Meet Luna. The first serious Lunetta synthesizer.Look beyond clean waveforms and predictable polyphony. Luna takes you back to a time when digital didn’t mean perfect. It meant raw. Inspired by the subterranean DIY culture of the 70s and 80s, Luna is a love letter to the Lunetta machines of old – living, breathing organisms built from CMOS logic chips. But where those machines were fragile experiments, Luna is a weaponised instrument of sonic confusion.The Nervous System Exposed. True to the Neutral Labs philosophy, we don’t believe in hiding the magic behind an opaque faceplate. Luna features exposed CMOS inputs and outputs directly on the front panel. You're not simply patching cables – you are rewiring the brain of the synthesizer itself. Combine signals, bend logic, and physically intervene in the computation to create sounds that shouldn’t exist.Rhythm is Timbre. Timbre is Rhythm. In the world of Luna, there is no difference between a sequencer and an oscillator. The same digital pulse that drives a bass line can be accelerated into a screeching lead or folded into a metallic drone.Five oscillators provide the raw material. A chaotic array of logic blocks (XOR, NOT, AND, shift registers, counters, multiplexer) chews up those signals and spits out complex, evolving mathematical noise.Taming the Digital Mess. Raw logic can be harsh. To turn this binary chaos into music, Luna feeds its digital soul through three organic low-pass gates. These analogue circuits impart a natural decay and percussive punch to the madness, transforming mathematical errors into bongos, plucks, and thumping basslines.Drench it in Atmosphere. Once you’ve constructed your signal, destroy it again. Luna comes equipped with a suite of effects – distortion, delay, reverb, chorus, bitcrusher, phaser and more – to smear your logic into a wash of ambient bliss or gritty industrial texture.Features:• 5 oscillators• Logic gates (2 XOR, 2 NOT, 2 AND)• 5 logic blocks (5-step ring counter, 4-bit binary counter, 2 shift registers, 4-channel multiplexer)• 3 touchpads that generate logic signals• 3 channels for audio manipulation (low-pass gates with adjustable decay and switchable trigger mode, gain, tilt EQ)• 13 audio effects freely assignable to 2 effect slots running in series (drive, delay, reverb, 6 filter types, bitcrusher, phaser, chorus, comb filter)• CV control for effects and 2 oscillators• MIDI control over 2 oscillators, all 3 low-pass gates, and 3 logic outputs• 2 sequencers with up to 64 steps, syncable to clock or MIDI• Headphone-compatible audio outputDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
Meg is a unique kind of waveshaper. Instead of folding the wave back in on itself like a common wavefolder, it shifts parts of the wave up or down, with the shifting threshold being adjustable. The resulting 2 half-waves can be flattened one by one, essentially morphing into a half square wave and eventually a full square wave. Essentially, it will add pulse-width modulation (and more) to any kind of wave. Both knobs can be fully CV controlled.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
Nermal is discontinued for now - sorry. Nermal is a destructive distortion Eurorack module that has some unique sonic qualities. There are 3 levels of distortion ranging from subtle saturation to utter destruction. An integrated modulator can switch or even blend between these modes, with the modulation frequency going well into the audio range, in which case, interesting harmonics and artefacts can be created on top of the incoming audio. Nermal rewards experimentation and unexpected sweetspots can often be discovered along the way. In addition to the onboard modulator, there are external modulation options via control voltages (CV) for the most commonly used parameters. LFOs and envelopes work great, but audio signals are accepted as well and make for the most interesting patches.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
A 4 HP distortion module that allows the flavour of the sound to be changed by separately available preset cards, or even just individual components that can be plugged directly onto the front panel, like diodes, capacitors and resistors. Maybe you would want to try an LED combined with a photoresistor? The cards (Product name: Nuts) are also compatible with the Scrat VCF module.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
Nuts is a set of four preset cartridges for Neutral Labs Scrat and Nijel. They give you instant access to a variety of filter sounds. Please read the Scrat manual to get a detailed explanation about how it works. Elmyra 2 has different preset cards, but they should also work with Scrat and Nijel.
sold out at the moment
Pip contains two morphable CV generators/complex LFOs in 8 HP that can be synced to each other in predefined ratios, unsynced or phase-shifted between each other. You can choose from a large variety of preset waveforms, random waves or even record and morph your own external CV or knob movements.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
Scrat - user customizable Steiner-Parker filter. Scrat is an aggressive sounding multimode Steiner-Parker filter with a twist: You can change the resonance response by plugging in components like diodes, capacitors or resistors (even LEDs and/or light-dependent resistors) directly to the front panel. A set of preset cartridges is also available, which gives you instant access to a variety of filter sounds. You could even make your own. Or go all in and connect some jumper wires to a breadboard for pretty much endless possibilities.The 2-pole filter (12 dB/octave) supports both high-pass and low-pass mode. Even without external components or cartridges, the resonance behaviour can be changed in various ways via switches on the front panel. A set of 4 preset cards called Nuts (Acorn, Almond, Cashew and Pecan) is also available.Both resonance and cutoff can be fully CV controlled, and the cutoff CV sensitivity can be adjusted as well. The module contains an adjustable pre-filter drive circuit, which pairs very well with the Steiner-Parker design.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
This is the DIY Desktop version of this unit with black panel.Scrooge is a sequenced malfunction generator, available as a 42 HP Eurorack module or semi-modular desktop synth. While you can convince it to deliver boomy kick drum sounds, clicky hi-hats or metallic snares, it would much rather be making glitchy artifacts, hollow crackles and horribly distorted growls. It contains a sophisticated and performance-oriented step sequencer with parameter locking and the possibility to control all steps across multiple tracks at once. Its 5 distinct and fully analog voices are made up of special circuits that work without dedicated power supplies, scrounging power from the sequencer control signals instead, which gives them an organic and unstable quality. As a bonus, it means you won’t have to power the unit itself if you sequence it from external gear.Features:• 5 distinct analog voices• device can work passively without a power supply if sequenced from external gear• each voice can be routed to either of 2 main outputs (headphone compatible)• individual voice outputs• individual voice CV inputs that respond well to audio signals• 2 modulation tracks, individually routable to voices• 2 modulation CV inputs• onboard step sequencer * parameter locking per step * "control all" mode (change parameters for several steps and tracks at once), great for interactive playing * arbitrary step length per track (up to 64 steps) * generative algorithm builds random variations on patterns (available while performing), or creates random patterns from scratch * pattern chaining (up to 32 patterns) * stores up to 128 patterns in 16 banks * microtiming * CV slew limiter per track• can sequence external gear• sync output• sync and reset inputs• MIDI input (TRS type A)• Bamboo wood caseDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
only 2 left
This is the DIY Eurorack version of this unit with black panel.Scrooge is a sequenced malfunction generator, available as a 42 HP Eurorack module or semi-modular desktop synth. While you can convince it to deliver boomy kick drum sounds, clicky hi-hats or metallic snares, it would much rather be making glitchy artifacts, hollow crackles and horribly distorted growls. It contains a sophisticated and performance-oriented step sequencer with parameter locking and the possibility to control all steps across multiple tracks at once. Its 5 distinct and fully analog voices are made up of special circuits that work without dedicated power supplies, scrounging power from the sequencer control signals instead, which gives them an organic and unstable quality. As a bonus, it means you won’t have to power the unit itself if you sequence it from external gear.Features:• 5 distinct analog voices• device can work passively without a power supply if sequenced from external gear• each voice can be routed to either of 2 main outputs (headphone compatible)• individual voice outputs• individual voice CV inputs that respond well to audio signals• 2 modulation tracks, individually routable to voices• 2 modulation CV inputs• onboard step sequencer * parameter locking per step * "control all" mode (change parameters for several steps and tracks at once), great for interactive playing * arbitrary step length per track (up to 64 steps) * generative algorithm builds random variations on patterns (available while performing), or creates random patterns from scratch * pattern chaining (up to 32 patterns) * stores up to 128 patterns in 16 banks * microtiming * CV slew limiter per track• can sequence external gear• sync output• sync and reset inputs• MIDI input (TRS type A)DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
The PCBSNR is a simple and low power portable noise device based on the Radical Chip (a collaboration between Max Wainwright and Dirty Electronics). 64 different chaotic digital algorithms make harsh noise, video game sounds, pulses and clicks, and more.Two knobs and one button for random algorithm "select".The design is based on the original stripboard version, and is thus very easy to modify and hack. All traces are visible, and cuts and front-side traces are labelled on the back of the circuit board.Features:• Two knobs that change the sound• 64 algorithms with random select• Patchable with pin or socket headers• Jumper for DC coupling for FM etc• Jumper for mono sum (for use with headphones)DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
System Sound is a feedback noise device for experimental music, sound design, sound art and more.It has a two channel mixer, a microphone, digital tone generator (sine/noise), two tilt equalisers, effects loop and a power amp. Simple standard circuits are connected in a clever way to enable many kinds of drones, noises, pulsations and chaotic messes even without anything plugged in.Features:• Two inputs with normalised feedback and plenty of gain• A digital tone generator with sine wave/noise + FM switch• A ~1.2W power amp with fast and solid speaker connectors• An electret microphone for electroacoustic feedback• Effects loop with "send blend" and even more gain• Auxiliary line outputDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
The Coiler Multi-mode Filter and Rectifier packs an entire nest of sound-shaping features into a single 8HP Eurorack module. It's a two-pole state-variable filter based on a unique integrator design which stores energy in both inductors and capacitors depending on the frequency range. The transition region between the two components, and the saturation characteristics of the traditional OTA-based amplifiers, offer warmth and ever-shifting timbres in the midrange, along with hissing highs and slithering lows. This is a somewhat unpredictable filter.With simultaneous low-pass, band-pass, and high-pass outputs, the Coiler works well in traditional subtractive patches. But its built-in full-wave rectifier is also great for adding harmonics and distortion in patches from the other coast. When combined with low-pass, the rectifier allows the Coiler to serve as a basic envelope follower, for compression and external-signal patches. It's a lot of bite for the buck, and for the rack space.The MSK 009 Coiler VCF is available as a pre-built 6HP Eurorack module or a DIY kit. Slide one into your rack today.Features:• High-quality potentiometers with bushings fastened to the panel for wobble-free operation; conductive plastic for smooth feel; rated for one million operations lifespan (compare to fifteen thousand or less for typical cheap pots)• All-new circuit, not a clone or imitation of anything else• Through-hole for easy hand construction and maintenance• No compromises on build quality: real aluminum panel, not PCB material, with colour printing; nickel and gold plating on the circuit board; close-tolerance metal film fixed resistors.• Fully open design - no lock-inDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
There are hundreds of analog synthesizer VCFs, but only a few core designs. You've got your Moog transistor ladder and imitators that use diodes or other substitutes; you've got your two-pole state variable filter, maybe cascaded to get additional poles; and that's about it. Your grandmother was making electronic music with these designs in the 1960s, and not much has happened since. There are a few more options available in digital and semi-digital (such as switched-capacitor) architectures, but most analog designers have given up trying to create really new filters. Instead, they compete on how well they can imitate or clone specific "vintage" filters.The North Coast Synthesis MSK 007 Leapfrog is new and different, with a sound all its own. The fifth-order "leapfrog" core topology, with five integrators and multiple feedback loops, originates in scientific work more recent than the 1960s and as far as we know never before available in a modular synth VCF. The near-elliptic response curve has an extremely sharp cutoff, with ripple in the passband and nulls in the stopband at frequencies chosen to be musically relevant.Sweep the cutoff and hear each harmonic pop into existence and wobble around before the next one arrives. Choose a timbre, and the temperature compensated volt per octave tracking will keep it consistent across the frequency range. Change it up with exponential and linear frequency modulation. There's even a built-in VCA, because you can never have too many VCAs.Features:• High-quality potentiometers with bushings fastened to the panel for wobble-free operation; conductive plastic for smooth feel; rated for one million operations lifespan (compare to fifteen thousand or less for typical cheap pots)• All-new design, not a clone or imitation of anything else• Ultra-sharp five-pole near-elliptic low-pass response, 61dB/octave at the least steep part of the main cutoff slope, with peaks and nulls at musically relevant frequencies• Built-in VCA switchable to feedback or output modes from the front panel - no jumpers• Temperature compensated V/octave tracking• Through-hole for easy hand construction and maintenance• Connectors between boards, and panel controls mounted on a board - no flying wires• No compromises on build quality: real aluminum panel, not PCB material, with colour printing; panel screwed solidly to both the PCBs and the pots and jacks, for maximum ruggedness; nickel and gold plating on the circuit boards; polystyrene integrator capacitors; close-tolerance metal film fixed resistors; multiturn trimmers.• Fully open design - no lock-inDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
only 1 left
The MSK 008 Voltage-Controlled Octave Switch is a multifunction voltage processor. The module has two channels, each containing a whole-volt quantizer that maps its input to the nearest integer number of volts from -2 to +2; a three-position toggle switch that shifts the quantizer boundaries up or down by a volt; and a precision adder (with optional subtraction function).If you simply route a pitch CV through one of the unquantized CV1 inputs, it can be a performance control, allowing easy transposition up or down an octave at the flip of a switch. That might be useful for VCOs without their own built-in octave switches. With no input signal, it generates a selectable offset of -1, 0, or +1 volts; feed that into an attenuated exponential FM input somewhere and you get the same tactile control over any other interval transposition you choose.But the possibilities really open up when you start using more inputs. An LFO into the quantized input gives the effect of flipping the octave switch under CV control, keeping your hands free to wiggle elsewhere. Using the unquantized inputs, which are normalled across the two channels, you can transpose one sequence by another. The CV2 input can add or subtract, selectable during build by a solder jumper on the circuit board; in a default build, CV2 adds on the left channel and subtracts on the right, but do-it-yourselfers can change this selection, or design their own expanders to make it switchable on the fly.Combining the two channels, with or without other utility modules, allows more complex melody-shifting effects. And it doesn't have to be just for oscillator pitch control. Switching fixed-voltage offsets on filter cutoffs also makes for great drops and timbral shifts. (And try putting the result through a slew limiter!) The default sum and difference configuration allows the module to act as a "mid-side" encoder or decoder. With other patching it can be a flip-flop or a wavefolder.The MSK 008 is fast enough to work on audio. The quantizer is built from hardware comparators, without a microcontroller, and it can do simple bit-crushing effects across the whole audio spectrum. Each channel can also be a unity mixer for audio, with two regular inputs plus the output of the bit-crusher.Features:• Two channels and multiple CV functions in a small space• Flash-style comparator quantization - no microcontroller• Through-hole design for easy hand construction and maintenance• Connectors between boards, and panel controls mounted on a board - no flying wires• No compromises on build quality: real aluminum panel, not PCB material, with colour printing; nickel and gold plating on the circuit boards; close-tolerance metal film fixed resistors; multiturn trimmers.• Fully open design - no lock-inDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
only 1 left
The MSK 010's Wien-bridge oscillator cores produce low-frequency sine waves natively, in a fully analog way with a minimum of harmonic distortion. There are no glitches from waveshaping or stair-steps from insufficiently filtered digital-to-analog conversion. Modulate synthesis parameters with these for smoothly evolving timbres and mind-expanding soundscapes. Because the cores are fully independent and will not synchronize, a patch using multiple LFOs will not repeat its modulation state for a long time, if ever.Choose one of three variants of this module, each with its own set of eight nominal frequencies and cycle times. There are no duplicate or near-duplicate frequencies between different variants, so with two or three, you get the full benefit of a larger modulation palette. Note that the nominal frequencies are just that; every module will have its own one-of-a-kind pattern of exact output frequencies within a few percent of the nominal values, due to component tolerances.• Variant A - 16mHz, 60mHz, 190mHz, 410mHz, 720mHz, 1.3Hz, 4.8Hz, 16Hz (63s cycle time down to 63ms)• Variant B - 34mHz, 88mHz, 160mHz, 280mHz, 600mHz, 1.8Hz, 3.4Hz, 11Hz (30s cycle time down to 94ms)• Variant C - 28mHz, 72mHz, 130mHz, 340mHz, 2.2Hz, 4.1Hz, 7.2Hz, 8.8Hz (35s cycle time down to 110ms)Features:• All-new design, not a clone or imitation of anything else• Fast starting - full amplitude oscillations within one cycle of power-up, unlike the usual behaviour of an oscillating filter• Through-hole design for easy hand construction and maintenance• Connectors between boards, and panel components, mounted on the boards; no flying wires• All three variants build from the same bill of materials; one full kit or PCB set can be used to build any one variant of your choice.• No compromises on build quality: real aluminum panel, not PCB material, with colour printing; nickel and gold plating on the circuit boards; close-tolerance fixed resistors and integration capacitors.• Complete technical documentation released under GPLDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
North Coast makes the Eurorack four-knob utility mixer sound great again with this minimalist design featuring just six transistors. Where a conventional mixer would typically require at least five operational amplifier units each containing a dozen or more transistors, we cut the complexity and distill mixing to its essence. This is a new design made with current components and modern manufacturing quality; but its Class A amplifiers operate on principles that go all the way to the dawn of electronic signal processing.Suitable for both audio and control voltages, with bonus features that don't compromise the minimalist philosophy: positive and negative offset; simultaneous DC- and AC-coupled outputs; maximum gain a little over unity for when you need that extra push over the cliff. It can also function as a transistor distortion effect, by offsetting the signal until it clips and then using the AC-coupled output.Features:• High-quality potentiometers with bushings fastened to the panel for wobble-free operation; conductive plastic for smooth feel• All-new design, not a clone or imitation of anything else• Classic discrete-transistor design style; DIY kit ships with silicon 2N5088 transistors for a clean modern sound, easily modifiable to use other recent or "vintage" types• No ICs!• Through-hole for easy hand construction and maintenance• No compromises on build quality: real aluminum panel, not PCB material, with colour printing; nickel and gold plating on the circuit board; film output coupling capacitor; close-tolerance metal film fixed resistors.• Fully open design - no lock-inDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.