Sequencer
available
The M185 is the most intuitive and playable Eurorack sequencer.It appeals as a hands-on performance orientated module for easy creation of complex melodic sequences.It is the original multi-step-per-stage sequencer that inspired the Metropolis and Metropolix modules.• Features an expansion header for chaining two M185s for 16 stage sequences• Lots more quantisation scales• Live X0X style Gate Pattern programmingOVERVIEW• 8 unique gate modes for creative rhythmic possibilities• A/B split mode for two separate sequences, like having two sequencers in one box• 2 channels of CV/GATE and MIDI I/O• 15 Quantise scales OR pure analogue microtonal CV outputINPUTS & OUTPUTS• 2 channels of CV and Gate outputs• Expansion header to connect two M185s for 16 stage sequences• Reset input [ shared with MIDI input ]• Sync output [ shared with CH2 gate ]• Bidirectional Clock I/O• MIDI input for MIDI clock in, MIDI note transpose• MIDI output for MIDI clock out, MIDI note outputSTAGE DETAILS• 8 stages, each with individual 1-8 step repeats per stage• 8 gate modes per stage [ Off, Once, All, 1/2, 1/3, 1/4, Probability or Programmable, and Long ]• Programmable gate patterns for 'on the fly' X0X style programming of gate triggersEVEN MORE DETAILS !• AB serial split sequence mode with 1-8 sequence repeats for AAABAAAB sequence structures• AB parallel split mode, for two separate simultaneous sequences that play at the same time• Root note offset and reset trigger options from sequence B to A• 2.5V / 5V voltage range selectable• MIDI note output including programmable velocity• MIDI to CV converter mode [wow]• Programmable glide per stage• Easy user upgradable firmware using MIDI sysex filesPLEASE NOTE THE KIT IS ONLY SUITABLE FOR EXPERIENCED BUILDERS.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
only 2 left
EUCLIDEAN is a gate sequencer for the Eurorack format based on the euclidean algorithm. It is based on the euclidean DIY module developed by Music Thing Modular’s Tom Whitwell, and he has blessed this module with his approval.The module consists of three channels of sixteen step sequences, and each channel can be set to any length, density and offset between one an sixteen. You get clear visual feedback due to the 8×8 matrix LED display, and setting each channel is easily done with the three encoders.EUCLIDEAN is perfect for creating polymetric rhythms, odd time signature sequencing or clock division with a twist.The module runs an internal clock set to 120 BPM by default, but can be triggered and reset externally. Each sequencer channel has a dedicated trigger output. In addition, the first channel has an inverted output that outputs triggers on every offbeat.Trigger output voltage: 5VDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
ODDS is a generative melodic looping sequencer for the Eurorack format. It generates notes based on random probability, and it is designed to be as musical as possible while maintaining a direct and minimalistic interface. It enables you to set a probability to generate random notes within a given octave, scale and chord structure.The module can via the LOOP switch either be set to indefinitely generate random notes, or be set to loop the last up to 64 steps. The V/OCT input acts as transposition within the chosen scale, making it easy to create chord progressions.Gate output voltage: 5 VCV output voltage range: 0-7 VDIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.
available
Designed with performance in mind, POLYSEQ delivers a flexible polyphonic step sequencing workflow. Any of the 8 memory slots can be programmed via external CV/GATE up to 64 steps in length. In playback mode, any of the three outputs can play back from any memory slot, making it possible to create polyphonic and polymetric sequences with low effort. POLYSEQ can be clocked internally with swing or externally via the clock input.Polyseq can be clocked internally (5-300 BPM) or externally. The internal clock has swing from 5 to 95% (Hold MODE and adjust the tempo pot).Beside CV and GATE, sequences can have rests, ties and glide. There’s also a skip function which steps forward in the sequence without overwriting anything. This is handy for editing sequences or changing the sequence length. Each channel can do forward, backward, ping-pong and random playback (Hold MODE and press channel switch to toggle through the modes). Each playback channel can also be clock divided from 1 through 8 (Hold MODE+CH and adjust the memory division rotary switch). Finally, each channel can be individually muted (Short press on channel switch, latching).DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
available
Rhythmatic is a complete analog drum machine for Eurorack, inspired by the iconic CR-78 and packed with modern features. It includes six classic analog drum voices, Bass Drum, Snare Drum, Low Conga, Rim Shot, Hi-Hat, and Cymbal.The built-in sequencer supports up to 64 patterns with polymetric sequencing across 16 steps, and it comes pre-loaded with original CR-78 patterns and exclusive banks by Sebsongs Modular, Konstantine, and Salkinitzor.A standout feature is the central randomization knob, which adds or subtracts steps to create evolving patterns—ideal for live performance. Holding the shift button transforms this knob into a loop recorder, capturing real-time tweaks and changes. Rhythmatic also includes voice mute buttons, configurable trigger I/O jacks, voltage control over key parameters, external clock/reset inputs, and flexible audio routing. Combining vintage sound with creative control, Rhythmatic is a versatile and performance-ready analog drum module.Features:• Six analog drum voices: Bass Drum, Snare Drum, Low Conga, Rim Shot, Hi-Hat, and Cymbal• Tune and decay controls for Bass Drum and Snare, decay control for Cymbal• 64-step sequencer with polymetric capabilities• 64 pre-programmed patterns, including CR-78 classics and artist-created banks• Real-time pattern randomization with central performance knob• Loop recorder function for pattern changes and knob movements• Individual mute buttons for each drum voice• Configurable trigger jacks for input or output per voice• Voltage control over pattern and randomization parameters• External clock and reset inputs• Dual audio outputs with voice split functionality• Designed for creative sequencing and live performance in Eurorack systemsDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
AlgoRhythmic Generator. Two outputs and five different rhythmic flavors multiply by a load of “algo-rhythmic” processing to result in a practically infinite number of polyrhythms. That’s the fundamental formula that produces the Knight's Gallop principle : a dual trigger generator providing sequences according to tables and modes.The source tables contain patterns such as the Euclidean polyrhythms, and the modes allow the user manipulate and mangle those patterns according to different algorithms. As the module has two outputs, it is a very powerful instrument to create diversified and instantaneous polyrhythms.Features:• Dual Output Trigger Generator• Variable length sequences (up to 16 steps)• Length and Pulse amount potentiometers and CV inputs• Shift + & shift - buttons allowing to shift the sequence forward and backward• Main mode (MN) providing a lot of utlity modes for the second output : reset, no shift, invert and reverse• Compute mode (CP) calculating associated sequences for the second output delivering very musical polyrythm• Random mode (RD) adding randomness on the second output sequence, 4 amounts of randomness determined by the sub mode• Dual mode (DL) allowing to set the two outputs seperatly• Record mode (RC) turning the Knight's Gallop into a “play your sequence on the buttons to record it” module• Five different kind of tables for five different rythmic flavours : Divider Sequences, Classic Euclidean, Revised Euclidean, Anti Euclidean & Split Sequences• User replaceable firmware chipDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
only 1 left
In a simplistic way, The Mod Medusa could be described as an Euclidean LFO: an “algorithmic” modulation source which produces variable period LFO signals synced to rhythmic patterns. Those patterns are generated by algorithms such as the Euclidean one or different ones coming from the White and Knight's Gallop. The Mod Medusa has 4 outputs generating 4 correlated LFOs, which give different “polyrhythms” according to the chosen mode. Generated waveforms can easily be twisted using the symmetry and shape parameters which continuously morph the signal into different waveshapes. Many on-panel controls, assignable Gate and VCA Inputs turn the Mod Medusa into a strong performance tool. A very unique approach which leads to instantaneous and original results.Features:• Unique concept of sequenced LFO• Four outputs which can be correlated or independent• Four correlation modes: Main, Compute, Random or Phase• Eight tables generated by algorithms producing different rhythmic patterns• Length (from 1 to 16 steps), density and shift controls over the sequence• Shape and symmetry controls over the generated waveforms• Unipolar or Bipolar outputs• Peak Sync function allowing to synchronize the LFO differently to the incoming clock• Assignable gate input which can work as ratchet, track and hold or one shot mode.• Assignable VCA input which can be assigned to any output.• On board clock divider• Bipolar CV inputs (except for the VCA input)• Current state storingDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
Casting spells on every boring clock signals, The Time Wizard got a bag full of arcane time-warping tricks. All his magical feats are based on 6 dividers with selectable division factors and 4 switches providing 81 routing variations.This module's occult powers have been harnessed to easily clock and reset other sequencers with odd time signatures, provide weird clock division/multiplication ratios, and create complex poly-rhythmsFeatures:• Sextuple clock divider divided in two sections A and B• Dedicated potentiometer acting on the division factor for each divider• Clock multiplying and weird div / mult ratio abilities for the first section, first section incoming clock can be multiplied by 3 or 4, allowing to get easily triplets from a 16th clock or mult / div association as x4 / 7• Independant clocking or divider association abilities for the second section, so B5 and B6 can get their clock in internaly from B4. For example, associating B4 = /7 and B5 = /16 provide a hit at each clock begining of 4 bars with a 7/4 time signature• Auto-reset available for the first section or the whole module, the autoreset is provided by B6• Additional logic functions for divider A2 : A2 output can provide the following functions : A2 AND B5 or A2 OR A3• Jumper on the back for Trigger or Gate selection for B5 and B6• User replaceable firmware chipDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
available
Mal-2 is a random signal generator mainly intended as CV modulation source. It has 2 modes of operation to provide you with smooth random goodness. Imagine Eris herself lends you a third hand to keep your patches interesting.In the first mode the CHANGE knob morphs from a cubic interpolated (sine like shaped) random signal to a random walk function that could make a wallstreet broker delirious with joy.In the second mode the CHANGE knob sets the self similarity. On the minimum setting the signal is completely random. On the maximum setting the random sequence is locked to a repeating, identical 8 step sequence. In between the sequence seamlessly morphs to new shapes over time.This gives you a random CV where you can shape the bounds in which the chaos unfolds and goes far beyond a slew limited white noise.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
only 2 left
Introducing Simple Designer: the ultimate rapid prototyping instrument for the synth community. Boasting 80 slots for potentiometers, switches, and jacks, plus the capability to incorporate faders and LEDs, it invites endless creativity. Whether you're building from the ground up or iterating on existing designs, Simple Designer, powered by the versatile Daisy Seed microcontroller, is your canvas for creating a full-blown synthesizer. Tailored for designers, makers, and musicians at any skill level, Simple Designer transforms your visionary concepts into tangible, sonic reality with unprecedented ease. Start crafting your masterpiece with Simple Designer today—where your synth dreams become reality.Features:• Programmable. All Simple kits come with the Daisy Seed microcontroller and access to our introduction to synth programming video course.• Open source instrument on Github.• Each kit comes with a video course teaching sound fundamentals: https://learn.synthux.academy/• Powerful music instrument for live performances.DIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
Unleash your creativity with Simple Fix, the rapid prototyping tool designed for synth designers, makers, and musicians. Powered by Daisy Seed microcontroller, Teensy, or Arduino Nano, it's your quick-start solution to bring ideas to life. Effortlessly add knobs, switches, and jacks, and dive into the limitless world of sound and functionality. Whether you're a pro or a passionate hobbyist, Simple Fix accelerates your design process, transforming inspiration into reality faster than ever. Start your journey towards groundbreaking designs today and unlock your creative potential with Simple Fix—where your next masterpiece begins.Features:• Programmable. All Simple kits come with the Daisy Seed microcontroller and access to our introduction to synth programming video course.• Open source instrument on Github.• Each kit comes with a video course teaching sound fundamentals: https://learn.synthux.academy/• Fits in your pocket.DIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
Discover Simple Touch, the go-to rapid prototyping instrument for synth enthusiasts, from designers to musicians. Featuring 12 touch pads, 6 potentiometers, two faders, and stereo input/output, all powered by the dynamic Daisy Seed microcontroller. Simple Touch is engineered to bring your sonic visions to life with precision and ease. Dive into a world where your fingertips command the future of sound, blending intuition with innovation. Ideal for both seasoned creators and passionate hobbyists, Simple Touch is your shortcut to prototype, experiment, and elevate your designs. Embrace the power of touch with Simple Touch, and transform your creative impulses into extraordinary musical inventions today.Features:• Programmable. All Simple kits come with the Daisy Seed microcontroller and access to our introduction to synth programming video course.• Open source instrument on Github.• Each kit comes with a video course teaching sound fundamentals: https://learn.synthux.academy/• Powerful music instrument for live performances.DIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
Discover the Touch 2, an instrument designed for hands-on control and tactile interaction. Easily upload different instruments via USB and start playing instantly!Open source instruments included: BASS // STRING // LOOPER // FX // DRUMS // SLICERCheck out the product page for the complete instrument list, download links, and videos. https://www.synthux.academy/simple-synth/touch2Key Features:Swappable Faceplates: Includes 4 different faceplates for versatile performance.12 Touch Pads: Experience a responsive, tactile performance every time.Powered by the Daisy Seed microcontroller, the Touch 2 delivers incredible sound quality with any instrument you load onto it. Plus, it's fully programmable! Create your own unique instruments using C++, Arduino, Max, or Puredata.Upgrade your music-making experience with the Touch 2. Order now and elevate your performance!Features:• Programmable. All Simple kits come with the Daisy Seed microcontroller and access to our introduction to synth programming video course.• Open source instrument on Github.• Each kit comes with a video course teaching sound fundamentals: https://learn.synthux.academy/• Powerful music instrument for live performances.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
The Automator is a hands-on, 2-channel tempo-synced CV and gate recorder for Eurorack, built around a large, expressive slider and intuitive controls. It captures your movements in real time, turning gestures into looping modulation patterns with precise timing. Requiring an external clock (4ppqn), Automator continuously records while idle and begins playback the moment you hit record, looping up to 4 bars. You can change loop length and tempo post-recording, and each channel—selectable via a button—is color-coded (red for channel 1, green for channel 2). CV is recorded via the slider, while gates are captured using a dedicated button, with high resolution and flexible timing. Whether you're drawing dynamic modulations or tight rhythmic triggers, Automator gives you a powerful and performative way to animate your patches.Features:• Dual-channel CV and Gate recorder with tempo sync• Dedicated Gate button for rhythmic trigger input• Supports loop lengths from ¼ bar to 4 bars• Channel selection button with color indication (Red = Ch1, Green = Ch2)• Real-time recording resolution (CV every 2ms, gates down to 50ms)• High gate density (up to 125 triggers per bar)• Recordings timestamped for accurate playback timing• Decoupled gate and CV recording for flexible pattern creation• Clock input (4 ppqn) with tempo scaling from 30 BPM upwards• Playback length can be changed after recording without losing dataDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
only 2 left
The 1F is a voltage controlled switch, intended to be ‘one friend’ for your sequencer. Its design has been specially focused on working with sequences, by giving them some randomness, applying transpositions or constant variation over time. For this, 0.1% tolerance resistors have been used to achieve exact unitary gains for precision summing of the v/oct signals.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
The 4R is a quad random voltage generator in 2HP. It generates two different random stepped voltages per input, each time a rising edge is sensed at TRIG1 or TRIG2. The inputs are independent so they can work at different clock speeds. As TRIG2 is normalled to TRIG1 it is also possible to get 4 random values with just one trigger. The voltage range of each pair of outputs can be set as unipolar (0V to +5V) or bipolar (-5V to +5V).DIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.
only 2 left
The 8S is an 8 step sequencer in 8 HP with control over parameters of the sequence as reset, hold, random step and direction. It’s been designed to work with clock related signals like triggers or gates but any type of CV signals can be used at its inputs. The output signal path is completely analog and its range can be set as unipolar (0 to +5 volts) or bipolar (-5 to +5 volts) via jumper on the back.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
The u4R is a 1U adaptation of the 3U module 4R. It generates two different random stepped voltages per input, each time a rising edge is sensed at TRIG1 or TRIG2. The inputs are independent so they can work at different clock speeds. As TRIG2 is normalled to TRIG1 it is also possible to get 4 random stepped values with just one trigger. The voltage range of each pair of outputs can be set as unipolar (0V to +5V) or bipolar (-5V to +5V).DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
available
Tubbutec Drummertime is a performance-focused, TR-x0x-inspired Eurorack drum step sequencer built for fast hands-on programming and live editing. Available in multiple 1U formats, Drummertime combines large, illuminated buttons with deep sequencing features—pattern chaining, per-step probability, swing, ratchets/flams and flexible play directions—so you can sketch grooves quickly or perform complex, evolving drum arrangements in real time. Eight instrument channels give you per-step control and independent trigger outputs, while robust clocking options (internal clock with tap tempo, analog clock or MIDI clock) plus MIDI I/O make integration with both modular and MIDI ecosystems seamless. Multiple units can be linked for longer patterns or additional instruments, and the intuitive LED feedback system (red/blue/purple) keeps state information visible at a glance, making Drummertime ideal for live rigs, studio grooves and hybrid analog-MIDI workflows.This version features clicky switches.Features:• TR-x0x–inspired step sequencer with 8 instrument channels and 16 steps per pattern.• Pattern chaining / song mode (up to 32 patterns).• Multiple play directions: forward, backward, ping-pong, smart random.• Per-step probability, flam/ratchet and adjustable swing for humanized grooves.• Live tools: mute, tap recording, clear-while-playing, copy/paste patterns.• 8 trigger outputs, MIDI I/O and analog clock (internal clock with tap tempo and dividers).• LINKable to other units for longer patterns or extra channels (expandable up to 64 steps).• Two formats: single-module 1U 74HP or split 1U 60HP + 3U 4HP (Palette-compatible).DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.