Sequencer

Della is a compact 3 HP expander module for the Eurorack DIY version of Scrooge. It’s a fully passive breakout that provides individual outputs for all 8 sequencer tracks via dedicated sockets.The module connects to a header on the back of Scrooge and is designed specifically for the Eurorack version – this header is not accessible on the desktop unit.Features:• Eurorack expander for the Scrooge sequenced malfunction generator• Breaks out all 8 sequencer tracks via individual output sockets• Designed for the Eurorack version of Scrooge• Simple ribbon cable connection to back-panel header• Not compatible with the desktop version of ScroogeDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.

Elmyra 2 is a 4-voice digital/analog hybrid platform for microtonal sonic exploration, capable of creating anything from lush ambient soundscapes to gritty droning textures and shrieking noises, available as a 42 HP Eurorack module or semi-modular desktop synth. With 31 modulation targets, 4 polymetric sequencers, delay, additional per-voice effects, a choice of various filters, as well as onboard LFOs and utilities, it is essentially a purpose-built small modular system in itself. A set of preset cards (included) or electronic components like capacitors or diodes can be plugged into the front panel in order to change the sound character.Features:• 4 independent voices activated by touch or CV• wavetable-based complex oscillator engine, up to 12 oscillators in total, 1V/octave compatible• chromatic mode makes chords and harmonic sounds possible, microtonal scales supported• 41 patch points• 31 modulation targets• touchpads with analog envelopes that can be used as modulation sources• resonant filter switchable between:• boomy and aggressive multimode 2-pole state variable filter (low-pass, band-pass, high-pass)• creamy 4-pole low-pass ladder filter• delay with unhealthy amounts of feedback• lo-fi reverb• analog OUCH circuit: a unique combination of destructive distortion, waveshaping and filtering• sonic character can be customised by using special preset cards (set of 4 included) or components like diodes that can be plugged into the front panel• preset cards can be used with other Neutral Labs modules• external audio can be processed via audio input• 9 per-voice modulations and effects:• unison detune• dual sub-oscillators• saturation• bitmangler• sample rate reduction• noise• high-pass filter• low-pass filter• 2 LFOs: 1 sine, 1 complex morphable• 4 sequencers with arbitrary step length per voice (up to 128), allows polymetric structures• delay time and LFOs can be clock-synced or unsynced (tap tempo is also possible)• utilities• dual attenuator/buffered multiple/voltage generator• CV summing circuit• solid bamboo wood case• boutique synth handmade in GermanyDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.

Elmyra 2 is a 4-voice digital/analog hybrid platform for microtonal sonic exploration, capable of creating anything from lush ambient soundscapes to gritty droning textures and shrieking noises, available as a 42 HP Eurorack module or semi-modular desktop synth. With 31 modulation targets, 4 polymetric sequencers, delay, additional per-voice effects, a choice of various filters, as well as onboard LFOs and utilities, it is essentially a purpose-built small modular system in itself. A set of preset cards (included) or electronic components like capacitors or diodes can be plugged into the front panel in order to change the sound character.Features:• 4 independent voices activated by touch or CV• wavetable-based complex oscillator engine, up to 12 oscillators in total, 1V/octave compatible• chromatic mode makes chords and harmonic sounds possible, microtonal scales supported• 41 patch points• 31 modulation targets• touchpads with analog envelopes that can be used as modulation sources• resonant filter switchable between:• boomy and aggressive multimode 2-pole state variable filter (low-pass, band-pass, high-pass)• creamy 4-pole low-pass ladder filter• delay with unhealthy amounts of feedback• lo-fi reverb• analog OUCH circuit: a unique combination of destructive distortion, waveshaping and filtering• sonic character can be customised by using special preset cards (set of 4 included) or components like diodes that can be plugged into the front panel• preset cards can be used with other Neutral Labs modules• external audio can be processed via audio input• 9 per-voice modulations and effects:• unison detune• dual sub-oscillators• saturation• bitmangler• sample rate reduction• noise• high-pass filter• low-pass filter• 2 LFOs: 1 sine, 1 complex morphable• 4 sequencers with arbitrary step length per voice (up to 128), allows polymetric structures• delay time and LFOs can be clock-synced or unsynced (tap tempo is also possible)• utilities• dual attenuator/buffered multiple/voltage generator• CV summing circuit• case made of plant-based bioplastic and native German oakwood• boutique synth handmade in GermanyDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.

This is the DIY Desktop version of this unit.Logic, Unbound. Meet Luna. The first serious Lunetta synthesizer.Look beyond clean waveforms and predictable polyphony. Luna takes you back to a time when digital didn’t mean perfect. It meant raw. Inspired by the subterranean DIY culture of the 70s and 80s, Luna is a love letter to the Lunetta machines of old – living, breathing organisms built from CMOS logic chips. But where those machines were fragile experiments, Luna is a weaponised instrument of sonic confusion.The Nervous System Exposed. True to the Neutral Labs philosophy, we don’t believe in hiding the magic behind an opaque faceplate. Luna features exposed CMOS inputs and outputs directly on the front panel. You're not simply patching cables – you are rewiring the brain of the synthesizer itself. Combine signals, bend logic, and physically intervene in the computation to create sounds that shouldn’t exist.Rhythm is Timbre. Timbre is Rhythm. In the world of Luna, there is no difference between a sequencer and an oscillator. The same digital pulse that drives a bass line can be accelerated into a screeching lead or folded into a metallic drone.Five oscillators provide the raw material. A chaotic array of logic blocks (XOR, NOT, AND, shift registers, counters, multiplexer) chews up those signals and spits out complex, evolving mathematical noise.Taming the Digital Mess. Raw logic can be harsh. To turn this binary chaos into music, Luna feeds its digital soul through three organic low-pass gates. These analogue circuits impart a natural decay and percussive punch to the madness, transforming mathematical errors into bongos, plucks, and thumping basslines.Drench it in Atmosphere. Once you’ve constructed your signal, destroy it again. Luna comes equipped with a suite of effects – distortion, delay, reverb, chorus, bitcrusher, phaser and more – to smear your logic into a wash of ambient bliss or gritty industrial texture.Features:• 5 oscillators• Logic gates (2 XOR, 2 NOT, 2 AND)• 5 logic blocks (5-step ring counter, 4-bit binary counter, 2 shift registers, 4-channel multiplexer)• 3 touchpads that generate logic signals• 3 channels for audio manipulation (low-pass gates with adjustable decay and switchable trigger mode, gain, tilt EQ)• 13 audio effects freely assignable to 2 effect slots running in series (drive, delay, reverb, 6 filter types, bitcrusher, phaser, chorus, comb filter)• CV control for effects and 2 oscillators• MIDI control over 2 oscillators, all 3 low-pass gates, and 3 logic outputs• 2 sequencers with up to 64 steps, syncable to clock or MIDI• Headphone-compatible audio outputDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.

This is the DIY Eurorack version of this unit.Logic, Unbound. Meet Luna. The first serious Lunetta synthesizer.Look beyond clean waveforms and predictable polyphony. Luna takes you back to a time when digital didn’t mean perfect. It meant raw. Inspired by the subterranean DIY culture of the 70s and 80s, Luna is a love letter to the Lunetta machines of old – living, breathing organisms built from CMOS logic chips. But where those machines were fragile experiments, Luna is a weaponised instrument of sonic confusion.The Nervous System Exposed. True to the Neutral Labs philosophy, we don’t believe in hiding the magic behind an opaque faceplate. Luna features exposed CMOS inputs and outputs directly on the front panel. You're not simply patching cables – you are rewiring the brain of the synthesizer itself. Combine signals, bend logic, and physically intervene in the computation to create sounds that shouldn’t exist.Rhythm is Timbre. Timbre is Rhythm. In the world of Luna, there is no difference between a sequencer and an oscillator. The same digital pulse that drives a bass line can be accelerated into a screeching lead or folded into a metallic drone.Five oscillators provide the raw material. A chaotic array of logic blocks (XOR, NOT, AND, shift registers, counters, multiplexer) chews up those signals and spits out complex, evolving mathematical noise.Taming the Digital Mess. Raw logic can be harsh. To turn this binary chaos into music, Luna feeds its digital soul through three organic low-pass gates. These analogue circuits impart a natural decay and percussive punch to the madness, transforming mathematical errors into bongos, plucks, and thumping basslines.Drench it in Atmosphere. Once you’ve constructed your signal, destroy it again. Luna comes equipped with a suite of effects – distortion, delay, reverb, chorus, bitcrusher, phaser and more – to smear your logic into a wash of ambient bliss or gritty industrial texture.Features:• 5 oscillators• Logic gates (2 XOR, 2 NOT, 2 AND)• 5 logic blocks (5-step ring counter, 4-bit binary counter, 2 shift registers, 4-channel multiplexer)• 3 touchpads that generate logic signals• 3 channels for audio manipulation (low-pass gates with adjustable decay and switchable trigger mode, gain, tilt EQ)• 13 audio effects freely assignable to 2 effect slots running in series (drive, delay, reverb, 6 filter types, bitcrusher, phaser, chorus, comb filter)• CV control for effects and 2 oscillators• MIDI control over 2 oscillators, all 3 low-pass gates, and 3 logic outputs• 2 sequencers with up to 64 steps, syncable to clock or MIDI• Headphone-compatible audio outputDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.

Pip contains two morphable CV generators/complex LFOs in 8 HP that can be synced to each other in predefined ratios, unsynced or phase-shifted between each other. You can choose from a large variety of preset waveforms, random waves or even record and morph your own external CV or knob movements.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.

This is the DIY Desktop version of this unit with black panel.Scrooge is a sequenced malfunction generator, available as a 42 HP Eurorack module or semi-modular desktop synth. While you can convince it to deliver boomy kick drum sounds, clicky hi-hats or metallic snares, it would much rather be making glitchy artifacts, hollow crackles and horribly distorted growls. It contains a sophisticated and performance-oriented step sequencer with parameter locking and the possibility to control all steps across multiple tracks at once. Its 5 distinct and fully analog voices are made up of special circuits that work without dedicated power supplies, scrounging power from the sequencer control signals instead, which gives them an organic and unstable quality. As a bonus, it means you won’t have to power the unit itself if you sequence it from external gear.Features:• 5 distinct analog voices• device can work passively without a power supply if sequenced from external gear• each voice can be routed to either of 2 main outputs (headphone compatible)• individual voice outputs• individual voice CV inputs that respond well to audio signals• 2 modulation tracks, individually routable to voices• 2 modulation CV inputs• onboard step sequencer    * parameter locking per step    * "control all" mode (change parameters for several steps and tracks at once), great for interactive playing    * arbitrary step length per track (up to 64 steps)    * generative algorithm builds random variations on patterns (available while performing), or creates random patterns from scratch    * pattern chaining (up to 32 patterns)    * stores up to 128 patterns in 16 banks    * microtiming    * CV slew limiter per track• can sequence external gear• sync output• sync and reset inputs• MIDI input (TRS type A)• Bamboo wood caseDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.

This is the DIY Eurorack version of this unit with black panel.Scrooge is a sequenced malfunction generator, available as a 42 HP Eurorack module or semi-modular desktop synth. While you can convince it to deliver boomy kick drum sounds, clicky hi-hats or metallic snares, it would much rather be making glitchy artifacts, hollow crackles and horribly distorted growls. It contains a sophisticated and performance-oriented step sequencer with parameter locking and the possibility to control all steps across multiple tracks at once. Its 5 distinct and fully analog voices are made up of special circuits that work without dedicated power supplies, scrounging power from the sequencer control signals instead, which gives them an organic and unstable quality. As a bonus, it means you won’t have to power the unit itself if you sequence it from external gear.Features:• 5 distinct analog voices• device can work passively without a power supply if sequenced from external gear• each voice can be routed to either of 2 main outputs (headphone compatible)• individual voice outputs• individual voice CV inputs that respond well to audio signals• 2 modulation tracks, individually routable to voices• 2 modulation CV inputs• onboard step sequencer    * parameter locking per step    * "control all" mode (change parameters for several steps and tracks at once), great for interactive playing    * arbitrary step length per track (up to 64 steps)    * generative algorithm builds random variations on patterns (available while performing), or creates random patterns from scratch    * pattern chaining (up to 32 patterns)    * stores up to 128 patterns in 16 banks    * microtiming    * CV slew limiter per track• can sequence external gear• sync output• sync and reset inputs• MIDI input (TRS type A)DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.

The MSK 008 Voltage-Controlled Octave Switch is a multifunction voltage processor. The module has two channels, each containing a whole-volt quantizer that maps its input to the nearest integer number of volts from -2 to +2; a three-position toggle switch that shifts the quantizer boundaries up or down by a volt; and a precision adder (with optional subtraction function).If you simply route a pitch CV through one of the unquantized CV1 inputs, it can be a performance control, allowing easy transposition up or down an octave at the flip of a switch. That might be useful for VCOs without their own built-in octave switches. With no input signal, it generates a selectable offset of -1, 0, or +1 volts; feed that into an attenuated exponential FM input somewhere and you get the same tactile control over any other interval transposition you choose.But the possibilities really open up when you start using more inputs. An LFO into the quantized input gives the effect of flipping the octave switch under CV control, keeping your hands free to wiggle elsewhere. Using the unquantized inputs, which are normalled across the two channels, you can transpose one sequence by another. The CV2 input can add or subtract, selectable during build by a solder jumper on the circuit board; in a default build, CV2 adds on the left channel and subtracts on the right, but do-it-yourselfers can change this selection, or design their own expanders to make it switchable on the fly.Combining the two channels, with or without other utility modules, allows more complex melody-shifting effects. And it doesn't have to be just for oscillator pitch control. Switching fixed-voltage offsets on filter cutoffs also makes for great drops and timbral shifts. (And try putting the result through a slew limiter!) The default sum and difference configuration allows the module to act as a "mid-side" encoder or decoder. With other patching it can be a flip-flop or a wavefolder.The MSK 008 is fast enough to work on audio. The quantizer is built from hardware comparators, without a microcontroller, and it can do simple bit-crushing effects across the whole audio spectrum. Each channel can also be a unity mixer for audio, with two regular inputs plus the output of the bit-crusher.Features:• Two channels and multiple CV functions in a small space• Flash-style comparator quantization - no microcontroller• Through-hole design for easy hand construction and maintenance• Connectors between boards, and panel controls mounted on a board - no flying wires• No compromises on build quality: real aluminum panel, not PCB material, with colour printing; nickel and gold plating on the circuit boards; close-tolerance metal film fixed resistors; multiturn trimmers.• Fully open design - no lock-inDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.

Particles, is 4 channels of trigger modulation, capable of mathematically variating and manipulating your patterns with a combination of fun features to play with. It can evolve your rhythmic idea into more complex and groovy patterns which are difficult to achieve without music knowledge.You can create your algorithms from the rhythmic tools provided to be able to change the patterns instantaneously in many ways without worrying to sacrifice the original idea.You can shift and scramble the outputs, you can repeat the triggers with different time signatures to transform the grooves, mute in different ways, disappear by probability trigger inputs, disappear by probability repetitions, use sequential switching to shift randomly with a different kind of resetting, bypass each channel and set it individually the amount of each feature per channel when feeding external CV.The idea of Particles, was designed to provide features for building complex breaks, grooves, organic-evolving percussion sounds, different options for arpeggios, and even bass line grooves, the limits are decided by you.Features:• 4 trigger inputs/outs.• Repetitions with different distribution time to choose from.• Manually shift the output channels, scramble them randomly or clocked them in foward mode.• Reset the ouputs to 4 different shift modes.• Dissapear repetitions by probability per channel.• Dissapear the input trigger by probability per channel.• Mute each channel with clock divisions from input clock.• Mute manually the outputs• Disable triplets from repetitions to have musical patterns• Random volatges output clocked from clock input.• The slider keeps the adjusted value from each feature.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.

Patterns is a flexible 4-channel sequencer designed for hands-on control and dynamic rhythm creation.Each channel offers up to 64 steps and tools like randomization, probability, gate length, swing and clock division. Whether you're building tight grooves or experimental patterns, Patterns gives you deep control.The 4×4 grid interface is intuitive and performance-friendly, allowing you to program and visualize your sequences with ease.At the heart of the module is the dedicated Pattern button with which you can access 16 pattern slots. Switch instantly between patterns, chain them into longer sequences or trigger them via CV for live fills, breaks and unexpected turns.If you're jamming or arranging full tracks, Patterns keeps you in the flow with a balance of immediacy and depth.Features:• 4 independent channels with up to 64 steps each• Intuitive 4×4 grid interface for real-time programming• Random, probability, gate length, swing, and clock division per step• 16 pattern slots – switchable manually or via CV• Pattern chaining for building longer sequences• Compact, performance-ready design for live and studio useDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.

REWIRE is a 4×4 sequential switch and versatile signal router that lets you reconfigure a modular patch on the fly without touching cables.The module offers four inputs and four independent outputs, each with level control, switching logic and real-time manipulation and is built for dynamic signal flow, generative systems and performance precision. Fully clocked, resettable, shiftable and divisible, REWIRE functions as a patch programmer and performance brain in just 8 HP.Applications range from rotating LFOs across destinations and shifting melodies between voices to remapping triggers for generative grooves, stepping audio through multiple FX chains rhythmically, or using the faders as a simple manual preset bank.Features:• 4 inputs – 4 independent outputs (4×4 routing matrix)• Per-output level attenuverter (precision gain for each destination)• Sequential-switch for automated step-based routing• Clock input for tempo-synced switching• Resettable and shiftable for pattern control and live manipulation• Divisible/ratio modes for polymetric or subdivided switching patterns• Real-time manipulation – change routing without touching cables• Works with audio, CV and triggers (low-latency switching)DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.

Meet Bib, Buzzrito, and Blueberry – three playful and powerful Plinky-inspired modules that bring rich sound design and expressive touch control to your Eurorack setup. Designed by Alex Evans (creator of Plinky) and Ray Yokell (CrazyEmperor893 of The Crey Emporium), these unique characters break out Plinky’s sensitivity into three specialized creatures: Bib, a stereo effect chain with drive, delay, and lush reverb; Buzzrito, a lively swarm oscillator with 2D touch control and CV-morphing presets; and Blueberry, a generative touch sequencer that responds to pressure and gesture with pitch and gate outputs. Each module stands strong on its own, but they shine even brighter together, combining tactile control and rich stereo sound.Features:Bib• Stereo drive, delay, and reverb effects with touch-based page selection• Real-time modulation via pressure-sensitive interface• CV input assignable to any parameter using tap-and-turn gesture• Rear TRS stereo I/O header (Intellijel-compatible) for line or headphone outputBuzzrito• Stereo swarm oscillator with 2D touchplate for preset morphing• Seven built-in presets with XY CV control and looping gesture recording• V/Oct and Gate inputs for easy integration into any Eurorack voice chainBlueberry• Generative touch sequencer with 5 pressure-sensitive pads• Record and play up to 5 pitch patterns with individual tunings• CV control for transposition, memory selection, clocking, and scrub• Clocked mode with expressive step sequencing and preserved dynamicsDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.

nQuencer is a Eurorack module that turns the AtoV 16n faderbank into a step sequencer.Connect a 3.5mm stereo cable to the i2c socket, patch in a clock and get a pitch and gate output.When the nQuencer module receives a trigger at the Clock input it reads the state of the first 16n Faderbank fader and outputs a corresponding voltage at Output 1. At the next clock signal it will read the second fader and so on until it reaches the end and loops back to the start.Push the reset button or send a gate to the input to move back to the start.If a fader is at the very bottom no gate will be generated for that step in modes that output gates. The last fader that isn't at the bottom determines the length of the sequence.NOTE: Building the nQuencer module involves surface mount soldering using 0603 components and is therefore not recommended unless you have experience with similar projects. Aside from soldering tools you will require a multimeter to calibrate and suitable equipment to programthe microcontroller if you didn’t purchase one with your PCB.Features:Sixteen steps• up to 16 step sequence• out 1 outputs pitch and out 2 outputs a gate• reset button and input move back to the startTwo Eights• splits the 16n faderbank into two halves each with upto 8 steps• out 1 outputs pitch for the left half and out 2 for the right• clock advances both sequences or reset in advances sequence 2 (alt reset in)Transpose• splits the 16n faderbank into two halves each with upto 8 steps• values from the right half (up to 1v) are added to the left• out 1 outputs pitch and out 2 outputs a gate• clock advances both sequences or reset in advances sequence 2 (alt reset in)DJ• splits the 16n faderbank into two halves each with upto 8 steps but only one sequence at a time• reset button switches the output to the other sequence or reset in (alt reset in)• out 1 outputs pitch and out 2 outputs a gateOptions• hold the reset button to enter settings mode, use the faders to change settings and press the button to exit• direction up, down, up down, random• probability chance of a note firing• output voltage range max 1v, 2v, 3v, 4v• fader at bottom note off, output 0v, last fader not at bottom controls sequence length on/off• gate length• alternative reset input mode on/offQuantizer• root note• scale - chromatic (semitones), ionian (major), aeolian (natural minor), harmonic minor, dorian, phrygian, lydian, mixolydian, major pentatonic, minor pentatonic, blues, disabled (unquantised)DIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.

Κλάσματα is a single channel, voltage controlled Euclidean sequencer.It offers a range of 1-32 steps, opening up more possibilities for complex patterns. With voltage controlled sequence length and fills, Κλάσματα can transpose, shift and modulate rhythmic patterns at up to audio speeds.Just like Stocheia there is a normal and a toggling operating mode. The three-way switch is also used to stop and reset the sequence.The voltage controlled parameters have individual level settings. The controls are otherwise identical to Stocheia.For more infos, please visit the Rebel Tech website.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.

Στοιχεῖα is a dual Euclidean Sequencer. It algorithmically generates rhythmic sequences from an input trigger signal. The name (Στοιχεῖα, Stoicheia, or Elements) comes from the title of Euclid’s book Elements in which the algorithm was first described.HistoryThis goes way back. In the third century BCE, the Greek mathematician Euclid described a way to determine the largest common denominator of any two integers. As it turns out, his method is the same as what people have used to divide beats into rhythms. Across the globe, from ancient to modern times; the rhythms that pervade human existence can be generated using the same, simple algorithm.The cultural and historical range covered by these rhythms is nothing short of breathtaking. From Brazilian Samba and Bossa-Nova, to Bulgarian folk dances, thirteenth century Persian drum patterns, and complex poly-rhythms of West and Central Africa.Of course, Euclid’s work can be applied to more than just rhythmic patterns. A scientist named Bjorklund applied it to nuclear physics, in order to optimise the operation of the SNS particle accelerator. He also published his work with a proof of the efficiency of his method. Then, in 2005, a Professor of Computer Science called Godfried Toussaint linked up the dots and presented in a research paper the connection between the work of Euclid, Bjorklund, and musical rhythms.We have based our implementation on the work of Toussaint, Bjorklund and Euclid.Getting StartedConnect the left sequence output (second jack from the bottom left) to an envelope gate input controlling a sound source, or something like the trigger input of a drum module.Make sure the middle switch is in the centre position, and the left switch is in the up position. Now connect an LFO to one of the two clock inputs (bottom left or bottom right jack) and you should see the centre LED light up when a signal is received. If the LFO is very fast, the LED will appear to be dimly on - turn the speed down (or up) to where it is flashing at a regular pace.When an input clock signal is received, the centre LED will light up. When a sequence triggers an output gate signal, its corresponding LED will light up.Turn all the knobs in the left column to their centre positions. You should know have a sequence of length 8 with 4 fills (50% of the step length). This means that every other beat will be ‘on’, and you should see the sequencer LED flash on every second input clock. Consequently, the sequence output should generate a gate signal, triggering the module you have connected it to.If you turn the bottom left knob in the anti-clockwise direction, you will hear progressively fewer ‘on’ beats in the sequence until only one in 8 (the sequence length) beats is on. Turning in the clockwise direction, the sequence will start filling in more and more beats, until every beat is on.Now connect a different envelope or sound source to the other sequence and repeat!InstructionsEach sequence is controlled by a column of three knobs and a switch. The input parameters to the algorithm are sequence length and fills.The length of the sequence, measured in clocks or beats, is controlled by the second knob from the top. The range goes from 1 (fully counter clockwise) to 16 (fully clockwise), with 8 in the centre position.The number of fills, or on-beats, is set by the third knob. In fully counter-clockwise position, this is set to 1. Centre position will set every other beat ‘on’, or 50% . Fully clockwise sets every beat ‘on’, in other words: the number of fills are equal to the sequence length.The top knob adjusts which beat the sequence starts on - and hence resets to. In its centre position, the sequence will start on its first step. The start position can be changed by turning the top knob left or right: this will have the effect of rotating the sequence left or right, respectively.Trigger ModeWith its switch in the centre position, the sequence is turned off. To turn it on (Trigger Mode), push the switch up. In trigger mode, the sequence will switch its output high when receiving a clock signal rising edge (low to high transition), provided the next beat in the sequence is ‘on’. When the clock signal falling edge is received (high to low transition), the output will be switched back to low (0v). This means that the output trigger signals have the same pulse width as the input clock. So if the clocks are generated with very short pulses, the output triggers will be equally short. As a consequence, a pulse width modulation on the input clock signal will be passed on through the sequencer.Alternating ModePushing the switch down from its centre (off) position puts the sequence into Alternating Mode. In alternating mode, the output goes high on the first ‘on’ beat, and remains high until the next ‘on’ beat. In other words, the output toggles on every ‘on’ beat in the sequence. The up and down transitions occur on the rising edge of the input clock.ResetThe centre jack can be used to connect a reset trigger. When a reset is received, both sequences restart at their first position. This takes into consideration the rotation setting: If sequence A and B have different rotations, they will remain offset in respect to each other. Reset can also be manually triggered by pushing the centre switch momentarily upwards.Chained ModeThe centre switch can be pushed down, which enables Chained mode. When chained, the two sequences are repeated one after the other, instead of concurrently. This is very useful to build up more complex patterns. In chained mode, the output of the combined sequence is available at both output jacks. On startup, the first sequence will play through to its determined length. It will then stop, and the second sequence will play through to the end, at which point the first one starts up again. For example, setting the first sequence to length 12, and the second to length 4, will result in a combined 16-step sequence. A reset signal in Chained mode brings the combined sequence to the start of the first pattern. Rotation works as in regular mode. Chained mode can also be used to create sequences longer than 16 steps.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.

The Robaux 3PT is a multimode three-channel control voltage generator.The handy knob with the triple ring-shaped voltage indicator makes the module the ideal performance tool.The Tripot has three control voltage channels which can be adjusted with three parameter trimmers.Instead of using the big knob, the device can also be controlled via the CV input.The module offers seven different modes. These include a performance tool, chord generator, random generator, quantizer, sequencer or LFO.Features:• 1 x CV In, unipolar 5V• 3 x CV Out, unipolar 5V• 3 x ring-shaped led display• 1 x push button• 1 x big knob• 9 x trimmersDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.

The Robaux Decision Tree randomly sends a gate to one of three outputs and then to one of three sub-outputs. Generate unpredictable rhythms. You can choose to route a gate to a single random output or play polyphonic gates. Utilize the knob to transition from total chaos to a repeating loop.The latch mode lets you hold an incoming gate. Pair it with a multimode filter to select various filter types. Use it to alternate between a variety of waveforms. The random input routing injects vibrancy into your sound.The DCSN 3 can also function as a traditional clock divider. The signal is split from half to 1/16 on the top four jacks. Additionally, a continuous sequence is output through the lower eight jacks. Odd divisions enable intricate rhythm creation. Utilize it at audio rate for polyphonic chords using just one square VCO.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.

Program your patterns like on a classic TR machine. Record patterns with your fingertips. Create random patterns at the touch of a button.Turn your patterns into exciting performances with the mute and fill function.The LL8ᴵᴵ has 16 patterns with up to 16 steps. Create longer rhythms by chaining multiple patterns.But that's not all: The lil eight is now polymetric! Each track can have a different length, length reset, legato and a probability function.For even more exciting performances, there's a new fill mode that repeats entire steps of the whole pattern!Enter the world of modular drums with the Robaux Little Eight II.Features:• Number of Tracks: 8• Number of Steps per Track: up to 16• Number of Patterns: 16 (chainable)• 1 x Clock In• 1 x Reset In• 8 x Trigger Out• 1 x MIDI Out (adapter required)• 20 x backlight silicon button padsDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.

The Robaux SWT16+ is a 16-track eurorack trigger sequencer with up to 64 steps per track.The Sweet Sixteen Plus is perfect for triggering drums, envelopes or modulation sources.With the new member of the Robaux family, you can switch between eight different patterns.This will allow you to create even more exciting performances. You can store these patterns in up to 16 memory banks.Program your tracks step by step. Play your tracks on the fly. Or just use the new Euclidean rhythm generator.The new design has even more crazy flashing buttons! With the improved menu navigation, you can use the sequencer even more intuitive.The sequencer offers 16 different modes to create and modify rhythms. Modes are divided into four distinct areas:Create, Perform, Track Settings and Sequencer Settings.Randomize your tracks, move your steps or reverse your patterns. With these tools, you can discover entirely new rhythms.And the new Coin function adds even more variety to your beats.Features:• Number of Tracks: 16• Number of Steps per Track: up to 64• Number of Presets: 16• Number of Patterns per Preset: up to 8• 1 x Clock In• 1 x Reset In• 16 x Trigger Out• 1 x MIDI Out (Alternative firmware and adapter required)• 28 x backlight silicon button padsDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.