333modules - Env-Foll
only 1 left
Envelope follower with preamp, level and 2 outs: Gate out, envelope out.Features:• Fine pot to adjust levels• Gate out, envelope outDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
€83.30*
4ms - Percussion Interface & Expander
sold out at the moment
The Percussion Interface (PI) and PI Expander are a pair of Eurorack modules that generate gates and envelopes from acoustic drums, samplers, drum machines, and virtually any audio source.Converting microphone, instrument, line and modular signals into CV and clock/gate signals, the PI and PI Expander are suited for synchronizing sequencers or other modules to the rhythm of an audio track or live percussion. The modules can simultaneously be used as a pre-amp for microphones or line-level signals, while generating inverted envelopes useful for side-chaining. The PI module contains all the core functionality and can be used without the Expander to conserve space. The Expander requires the main PI modules and adds three gain stage options, a modular-level audio output jack, a 1/4" (6.35mm) input jack, and envelope attenuation capabilities. The two modules are only sold together, they are not available separately.Features:• Sensitivity knob, Low/Medium/High gain switch, and clipping LED• Sustain control to prevent misfires, increase gate length, and control the envelope• Envelope decay control• Non-inverted and inverted envelope outputs, useful for side chaining• Four envelope outputs: two attenuated with independent attenuators, and two non-attenuated• Envelope following or generation modes• Gate output for clocking sequencers or any unit with a clock or trigger input• Compatibility with drums, pads, samplers, microphones, piezos, drum machines, etc.• 1/8" or 1/4" input jack (6.35mm)
€173.70*
Befaco - Instrument Interface
only 2 left
Instrument Interface is an eurorack pre-amp capable to bring any type of audio signal to modular levels thanks to its amplification circuit.The module can drive regular and condenser microphones (+48V Phantom Powered) as well as Instrument and Line signals with a very low distortion ratio.Instrument Interface offers some additional extra functions like a Trig/Gate extractor and Envelope Follower circuits, allowing you to use the character of your audio signal in more creative waysFeatures:• Neutrik combo Input• Phantom Power selector• Input Impedance selector• Separated Audio en Envelope Level controls.• Envelope Follower with attack and decay control• Gate and Trigger Extractor with threshold selector.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
€154.70*
Befaco - Rampage
sold out at the moment
Rampage is Befaco’s approach to an old invention: the Serge/Buchla ramp generator.We took the idea of a “patch programmable” function generator/processor, put two units in the same module and expanded them with new functions and ways to combine them: Slope detectors, analogue logic functions and evolved outputs.RAMPAGE APPLICATIONS• Voltage controlled Attack Decay envelope.• Attack Sustain Release Envelope .• More complex ADSR Style Envelope.• Dual VCO. With Square, PWM, Saw, Log, Exp and Triangle shapes. Hard and soft sync.• Gated VCO• VCO + Analog AND Gate (As ADTimbral VCA)• Dual Low Pass Filter• Dual Low pass Filter with VCO soft sync.• Low Pass Filter + AD Envelope• Dual “syncable” voltage controlled LFO with Square, PWM, Saw and Triangle shapes)• Complex LFO . Function combination.• CV controlled and “Ping-Pong” LFO.• Dual Slope detector. Distinguishes when and incoming signal (CV or audio) is rising or falling, and generates gates in concordance.• Comparator. Send a gate when B IN is bigger than A IN• Polyrythmic gate generator. With both channels synced between each other, it generates several “complex rhythm” gates.• Voltage controlled Slew limiter with independent attack and decay control and continuous variable shape between Log, linear and exponential• Peak Voltage follower. Max Out follow the maximum Level of the two inputs.• Minimum Voltage Follower. Min Out follow the minimum level of the two inputs• Envelope follower with adjustable response for rising ans falling flanks.• Voltage controlled Trigger Delay .• Burst Generator.Features:• Built around two voltage controlled Integrators aka Lag Processors.• Convert square signals into ramp waveforms• Achieve “Portamento” or “Glide” effect when applied to pitch CV signals.• Basic lowpass filteringDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€184.45*
Befaco - Slew
available
Voltage-controlled lag processor and slope detector - 2025 versionTransforms stepped notes into smooth acid slides with independent speeds for both upper and lower notes.The onboard slope detector generates gates while the output is rising or falling, allowing events to be activated when moving to upper or lower voltages.Additionally, it can convert a gate signal into an Attack-Sustain-Release (ASR) envelope.The shape control feature helps balance speed versus input range, enabling quicker speed while sliding to further notes allowing for time compensated portamento.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€69.00*
Black Noise Modular - Cosmos
available
Cosmos is a new kind of module that will help you to creating complex modulation, sounds, patterns with ease and will lead you to new sounds territories.Inspired by early analog computers, Cosmos is a unique, innovative, very flexible and fully analog module allowing it to be used as: VCO, LFO, Ring Mod, Polarizer, “VCA”, “LPG”, Phase Lock Loop, Cross-Modulation, Minimum, Maximum, Logic Gates, Waveshaper, Complex gate generator, Fuzz, Distorsion, Gate extractor, Trig extractor, Gate generator, Voltage generator, Trig Generator, comparator, window comparator, complex comparator, Half-Rectifier, Full-Rectifier, Inverter, Buffered Multiples, Mixer, Difference, Compressor, Sidechain, compressor, VC Clipper, VC Switch, Clock doubler, Envelope follower, and more.With its wide fields of application Cosmos can replace many modules but it will also bring new colors to your palette thanks to its unique character. This makes Cosmos the ideal module whether you have a small case or a big system. 100% analog and with an intuitive interface Cosmos is also very easy to use, no menu and button combo problems.Inspired by the past and crafted for the future, 100% analog Cosmos was not only thought to be the center of any system but also to blend perfectly with the rest of your case to form a consistent and coherent system.Cosmos was designed not only to be a swiss army knife module but also to push you to explore and you help create new sounds and explore sonic territories that were previously unattainable.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€320.00*
Black Noise Modular - Slew-LFO
sold out at the moment
As its name implies you could think that SLEW/LFO is just a Slew and a LFO packed together but its more than that.We wanted to design a module around the Slew generator which is an underestimate function of a synth. Its often seen and use as a way to make portamento but we've thought it could be more than that.We wanted to design a small module so it could fit in any case. We wanted it to be ergonomic and easy to use despite its size. But we also wanted to pack as much features as possible to make it a "swiss knife module".The result is SLEW/LFO: a 4 HP wide module, that can be used as portamento, AD envelope, LFO, VCO, Filter, Envelope generator and much more.SLEW/LFO is so versatile that we use it in all our patchs, we are very pleased about it and hope you'll like it as much as we are.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€82.00*
Herbs and Stones – Pathways
only 1 left
This is the DIY version of this unit.Pathways is a modular matrix mixer designed for feedback manipulation, creative routing, weird synthesis… and many other things.Based around sixteen analog VCAs it can be the central hub of many different setups and a bridge between desktop gear and eurorack systems.Features:• 4x 1/4″ inputs with gain / drive control, 4x 1/4″ outputs• Each of the 16 matrix intersections can be controlled manually or via CV, a dedicated LED gives visual feedback of the channel volume• An envelope follower is normalled to input four, the signal then gets fed through a clock divider with three cascaded outputs. Willingly, an external signal can be inserted into the divider• Two voltage controlled LFOs can modulate any parameter and create dynamic feedbacks, asymmetrical panning, tempo-related fx send/returns• If patched into itself, each channel can self oscillate so it can be used as a polyphonic cv-controllable drone synthesizer• full eurorack compatibility, each parameter has its own 1/8″ input jackDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled unit. The kit includes all parts to build the unit. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€342.00*
Herbs and Stones – Solid Felt
only 1 left
This is the DIY version of this unit.Solid Felt is a stereo multimode analog filter in desktop format.Its name comes from the etymology of the words “stereo” and “filter”.From subtle timbral variation to an all-encompassing sonic treatment, Solid Felt can be used in multiple ways to embellish or vandalize your sound bouquet:As two independent mono filtersto give a stereo treatment to a mono signalto filter a stereo signal at the same cutoff frequency on the L and R channelsAs a mono 24dB/oct filter (placing the two filters in series)To synthesize sounds, via external feedback patchingTo extrapolate a CV signal from your audio input and use it to control any of its parameter or external gearAs a stereo overdrive effectTo bring line level signals to Eurorack levelFeatures:• 2x Analog multimode analog filters• 2x 1/4″ jack high impedance inputs• 2x 1/4″ jack low impedance outputs• 8x 1/8″ jack eurorack compatible CV inputs• 8x 1/8″ jack eurorack compatible CV outputs• Input gain control to amplify incoming signals up to fuzzy territory• mode control to select between lowpass, bandpass and highpass filter response (CV controllable)• an envelope follower (normalled to input A) which is fed into a three stage clock divider• a voltage controlled LFO with waveform blend control and two outputs 180° out of phase• a voltage controlled LFO with rising and falling sawtooth outputsDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled unit. The kit includes all parts to build the unit. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€355.00*