DIY Kits
available
This is the V3 Version of HatzHi-hats are typically rich in complex, inharmonic frequencies that create a metallic, shimmering sound. Hi-hats rely heavily on noise components to create the "sizzle" effect. While analog circuits can generate white or colored noise using transistors or diodes, it's difficult to get the noise characteristics just right for hi-hats. Designing a noise source that consistently produces the right quality and amount of noise can require fine-tuning and careful component selection. Hi-hats need very fast attack and controlled decay to emulate the sharpness of a real cymbal. Achieving precise control over these fast transients is challenging in analog circuits.Hatz v3 is an analog circuit that includes 2 types of noise: "Metals" generates stable, high-frequency square wave oscillations that are essential for the metallic, bright sound characteristic of hi-hats. "Texture generates a unique, digital form of noise that has a slightly "stepped" quality, adding a texture that's not as smooth as white noise, but has a desirable grain.Independent envelopes for precise transient shaping and a bandpass filter for frequency control contribute to a complex, high-quality hi-hat sound. This design approach provides flexibility, realism, and sonic richness that elevates the hi-hat beyond basic analog percussion.Features:• Analog hi-hat module combining 2 kinds of noise heart ❤ complex (LFSR) noise and (LOGIC) noise metals• 2 pole filter for each individual channel with CV• Vintage drum machine accent style• Choke switch• Linear and exponential fall selection in both channels• Open hat decay control with CV input• Decay control for the closed hat• Hold input for manual envelope opening via gates and CV• 2 LED indicators• Accent input with level/accent attenuatorDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
available
Moon Phase is a stereo 12dB/octave state variable multimode filter with powerful imaging technique to enhance and alter stereo field. The resonance behaves differently when stereo imager is open beyond any other filter when you play with the stereo imager control. With 8 different combinations and span to separate both filters, you increase the possibilities to treat your sounds and open them in the stereo field. Applying audio rate cv to the stereo imager or span control input and sweeping the cutoff control will create a unique character to the filter. The resonant peaks can be shifted around the stereo field, every cv input can be modulated up to audio rate frequencies creating a wide palette of sonic combinations. Check out the video about the module.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
available
Operat is an analog complex oscillator with a single core and several modulations inputs that makes a compact size complex oscillator when pairing it with the external gear. The core offers four different waveforms with Thru-zero FM/PM plus symmetry control over the modulation. It has an internal mixer with built-in VCA´s for each waveform and Amplitude/Ring modulation after the mixer circuit. PWM with 3 different configurations plus Hard/Soft sync input. With all these modulation configurations Operat can be transformed into a very wild FM little monster.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
only 2 left
Particles, is 4 channels of trigger modulation, capable of mathematically variating and manipulating your patterns with a combination of fun features to play with. It can evolve your rhythmic idea into more complex and groovy patterns which are difficult to achieve without music knowledge.You can create your algorithms from the rhythmic tools provided to be able to change the patterns instantaneously in many ways without worrying to sacrifice the original idea.You can shift and scramble the outputs, you can repeat the triggers with different time signatures to transform the grooves, mute in different ways, disappear by probability trigger inputs, disappear by probability repetitions, use sequential switching to shift randomly with a different kind of resetting, bypass each channel and set it individually the amount of each feature per channel when feeding external CV.The idea of Particles, was designed to provide features for building complex breaks, grooves, organic-evolving percussion sounds, different options for arpeggios, and even bass line grooves, the limits are decided by you.Features:• 4 trigger inputs/outs.• Repetitions with different distribution time to choose from.• Manually shift the output channels, scramble them randomly or clocked them in foward mode.• Reset the ouputs to 4 different shift modes.• Dissapear repetitions by probability per channel.• Dissapear the input trigger by probability per channel.• Mute each channel with clock divisions from input clock.• Mute manually the outputs• Disable triplets from repetitions to have musical patterns• Random volatges output clocked from clock input.• The slider keeps the adjusted value from each feature.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
Patterns is a flexible 4-channel sequencer designed for hands-on control and dynamic rhythm creation.Each channel offers up to 64 steps and tools like randomization, probability, gate length, swing and clock division. Whether you're building tight grooves or experimental patterns, Patterns gives you deep control.The 4×4 grid interface is intuitive and performance-friendly, allowing you to program and visualize your sequences with ease.At the heart of the module is the dedicated Pattern button with which you can access 16 pattern slots. Switch instantly between patterns, chain them into longer sequences or trigger them via CV for live fills, breaks and unexpected turns.If you're jamming or arranging full tracks, Patterns keeps you in the flow with a balance of immediacy and depth.Features:• 4 independent channels with up to 64 steps each• Intuitive 4×4 grid interface for real-time programming• Random, probability, gate length, swing, and clock division per step• 16 pattern slots – switchable manually or via CV• Pattern chaining for building longer sequences• Compact, performance-ready design for live and studio useDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
The Petit Mix is a 3HP Eurorack mixer module with 4 inputs. Each input has its own level control and all inputs are DC coupled to allow for CV mixing as well as audio. There is a bi-colour led on the Frontpanel to indicate signal polarity for active channels. DC coupled, 4 Inputs, Low Noise, Bi-Color LED showing positive (green) and negative (red) voltages.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
available
Petit Mix is a compact 4-channel Eurorack mixer. The mixer delivers transparent sound and instant hands-on control in just 4HP. Built for clarity and workflow speed, Petit Mix features four top-to-bottom channel strips (input jack above fader) and a summed mix output. Smooth, linear-response faders make precise level adjustments simple. If you want to balance your audio sources, blending CV signals or shaping a live mix. Low-profile and designed for fast operation, Petit Mix is the go-to small-format mixer that keeps your patch clean and lets you focus on the sound.Features:• Four independent input channels with dedicated smooth faders for precise level control.• Summed mix output for clean stereo or mono routing.• Top-to-bottom channel layout (input jack above fader) for intuitive, fast workflow.• Linear-response faders suitable for both audio and CV mixing.• Ultra-compact 4HP footprint saves case space in crowded rigs.• Low-noise design preserves dynamics and clarity across sources.• Fast-access layout ideal for live performance and hands-on patching.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
Punch is the ultimate VCA-DECAY module for Eurorack! Specially designed to generate dynamic percussive sounds but also capable of basslines, leads, envelopes and more. The VCA has a built in voltage controlled Decay envelope that can be turned from smooth to more aggressive exponential responses and can be activated with triggers, gates or cv’s. Punch also features accent inputs on each channel, for more interesting and dynamic sounds and envelopes. Punch v3 features two modes per channel to play, with a dedicated switch control: “vintage style drum machine mode” and “dynamic cv mode”. Punch is capable of creating AM sounds with control voltage on the “amount”. Each envelope can be inverted via dedicated switches on the front panel. If you use an inverted envelope alongside the accent input you can create ducking effects like side-chain compression. Check the official demo here and here a DivKid video about Punch.Features:• Dual VCA with voltage controlled Decay• Adjustable Decay curve• Snappy attack ideal for percussion• Accent inputs• Envelope shape invert switchesDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
available
Punch MG is a unique module with VCA-DECAY & Mute GROUP designed for Eurorack systems. This module has been specially designed to generate dynamic percussive sounds while also offering the capability to manage multiple signals simultaneously through its innovative mute group feature.Punch MG provides a versatile platform for designing dynamic percussive sounds. With its mute group feature, it allows you to handle numerous signals concurrently.The manual will guide you through the various features and functions of Punch MG, enabling you to explore its full potential.Key Features: Dynamic Sound Generation: Punch MG is engineered to generate dynamic percussive sounds with finesse, offering a range of creative possibilities.Features:• Mute Group Interaction and Signal Patterning: Utilize the mute group feature to enable interactions between signals that share the same group. This feature enables signal muting and amplitude limitation when multiple signals are triggered simultaneously. The amplitude and decay time of each signal are influenced by others in the same group. This characteristic can lead to captivating pattern variations when focusing on specific channels.• Expandable Capability: By linking two modules, you can expand the effect of the mute group to accommodate up to eight signals, fostering intricate interactions and captivating sonic landscapes.• AM Sound Creation: Connect audio rate signals to the level input to explore the creation of AM (Amplitude Modulation) sounds, further extending the sound design possibilities.• Envelope outs: Each envelope's polarity can be inverted using dedicated switches on the front panel, enabling you to achieve effects like side-chain compression and ducking. Also, the mute group circuit's influence extends to the envelope signal output, providing intriguing modulation capabilities that add a unique layer of creative expression to your sonic endeavors.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
REWIRE is a 4×4 sequential switch and versatile signal router that lets you reconfigure a modular patch on the fly without touching cables.The module offers four inputs and four independent outputs, each with level control, switching logic and real-time manipulation and is built for dynamic signal flow, generative systems and performance precision. Fully clocked, resettable, shiftable and divisible, REWIRE functions as a patch programmer and performance brain in just 8 HP.Applications range from rotating LFOs across destinations and shifting melodies between voices to remapping triggers for generative grooves, stepping audio through multiple FX chains rhythmically, or using the faders as a simple manual preset bank.Features:• 4 inputs – 4 independent outputs (4×4 routing matrix)• Per-output level attenuverter (precision gain for each destination)• Sequential-switch for automated step-based routing• Clock input for tempo-synced switching• Resettable and shiftable for pattern control and live manipulation• Divisible/ratio modes for polymetric or subdivided switching patterns• Real-time manipulation – change routing without touching cables• Works with audio, CV and triggers (low-latency switching)DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
Complex noise generator with 2 different outputs. Out 1 produces clean square waves with sub-harmonics and tone selection, remembering the nostalgic video consoles and taking it to strange metallic vibes. Out 2 is dedicated to the heavy chaotic metallic winds and explosions from other dimensions. Both shares the same signal modulation path, a dedicated output mix is placed to combine both textures to create a unique complex metallic percussions.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
only 1 left
This is the DIY Desktop version of this unit, but it can also used as an Eurorack module. Plinky is an 8 voice expressive polyphonic touch synthesizer that specializes in fragile, melancholic sounds, designed by mmalex.Think of it as an eight stringed instrument, with eight vertical monophonic strips. You can play it straight away on its 64 main pads. Each of the eight strings has 4 oscillators or sampler grains, detuned by the touch of your fingers, white noise, two ADSR envelopes and a resonant 2-pole low-pass gate. Plinky also has a global delay, reverb, high pass filter and saturation along with a simple mixer, arpeggiator, sequencer and sampler. It supports four external CV modulation sources, each with their own LFO.Plinky was released in 2021, then hit hard by the chip crisis. In coordination with Plinky’s creator mmalex, Making Sound Machines are bringing back Plinky both as assembled unit and as a beginner-friendly DIY Kit.Plinky v3 integrates TRS MIDI input and output directly on-board, so you sequence polyphonic chords externally and play a melodic line on top on its touch surface.The revision also upgrades to USB-C, optimizes the build experience, and introduces improvements to the audio path.Works as standalone unit with USB-C power or Eurorack power cable. DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
The Plinky Expander is a factory-assembled 2 HP Eurorack module that enhances the connectivity and versatility of Plinky. Designed for seamless integration, it brings essential CV and MIDI I/O to the front of your modular setup.With four additional CV outputs (A, B, X, Y), a front-facing USB-C port, and TRS MIDI input and output, this expander makes it easy to connect Plinky with the rest of your Eurorack system and external MIDI gear.Features:TRS MIDI Input & Output• Input supports both Type A (Korg) and Type B (Arturia)• Output supports Type A (Korg)USB-C Port• Use for patch editing, USB MIDI, and firmware updates (not for power)A B X Y CV Outputs• Output Plinky’s expressive modulation as control voltageSlim 2 HP Width• All the functionality of the classic 4HP DIY version in a compact, professionally-built formCompatible with Plinky v2 (blue) and Plinky v3 (black). For Plinky v1 (green), a simple modification to the expander port is required (see manufacturer documentation for details).DIY-Kit-Type:Assembled unit. This is completely ready to use, nothing to solder or to assemble.
sold out at the moment
Meet Bib, Buzzrito, and Blueberry – three playful and powerful Plinky-inspired modules that bring rich sound design and expressive touch control to your Eurorack setup. Designed by Alex Evans (creator of Plinky) and Ray Yokell (CrazyEmperor893 of The Crey Emporium), these unique characters break out Plinky’s sensitivity into three specialized creatures: Bib, a stereo effect chain with drive, delay, and lush reverb; Buzzrito, a lively swarm oscillator with 2D touch control and CV-morphing presets; and Blueberry, a generative touch sequencer that responds to pressure and gesture with pitch and gate outputs. Each module stands strong on its own, but they shine even brighter together, combining tactile control and rich stereo sound.Features:Bib• Stereo drive, delay, and reverb effects with touch-based page selection• Real-time modulation via pressure-sensitive interface• CV input assignable to any parameter using tap-and-turn gesture• Rear TRS stereo I/O header (Intellijel-compatible) for line or headphone outputBuzzrito• Stereo swarm oscillator with 2D touchplate for preset morphing• Seven built-in presets with XY CV control and looping gesture recording• V/Oct and Gate inputs for easy integration into any Eurorack voice chainBlueberry• Generative touch sequencer with 5 pressure-sensitive pads• Record and play up to 5 pitch patterns with individual tunings• CV control for transposition, memory selection, clocking, and scrub• Clocked mode with expressive step sequencing and preserved dynamicsDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
only 2 left
Plinky 12 Blocks is an expressive polyphonic synthesizer and multi-timbral groovebox built around the Plinky 12 touch interface. Its 16 × 16 RGB matrix of pressure-sensitive capacitive pads turns performance, sequencing and sound design into one fluid surface, combining the immediacy of touch with the depth of a programmable digital instrument.Blocks expands the original Plinky concept into a wider performance environment with 10 tracks for sequencing, live playing and editing. It supports clip launching, chord sequencing, piano-roll style control and live insert effects, making it a flexible instrument for building evolving patterns, layered textures and complete musical ideas.The built-in synth engine combines sample playback with wavetable synthesis and includes a VCF, VCA, wavefolder, ADSR, XY control, motion-recording LFOs, additional modulation LFOs, accelerometer control and a 5 × 30 modulation matrix. With CV, MIDI, USB audio and SD card support, Plinky 12 Blocks connects easily to Eurorack systems, MIDI hardware and computer-based setups.Features• Multi-timbral Plinky 12 groovebox and expressive synthesizer.• 16 × 16 RGB pressure-sensitive capacitive touch matrix.• 10 tracks for sequencing, performance and live editing.• Clip launching, chord sequencing and piano-roll style control.• Sample playback and wavetable synthesis engine.• VCF, VCA, wavefolder, ADSR and extensive modulation.• CV, MIDI, USB audio and SD card support.• Swappable front-panel system with expandable instrument options.• Pre-assembled in a 12mm-thin steel enclosure.
available
Single panel only - requires a Plinky 12 to plug into and play.Plinky 12 is a family of three expressive polyphonic synthesizers built around a new Plinky sound engine, a touch-first performance interface and a flexible swappable-panel hardware design. Each version – Blocks, Chords and Toadstep – turns the same ultra-thin core instrument into a different musical environment. Multi-timbral sequencing, harmonic exploration, acid-style step sequencing and generative melodies everything is possible with the Plinky 12.At the center of Plinky 12 is a 16 × 16 RGB matrix of pressure-sensitive capacitive touch pads, allowing expressive control over notes, modulation and performance gestures. The built-in multi-timbral synth engine combines sample playback with wavetable synthesis and includes a full VCF, VCA, wavefolder, ADSR, XY control, motion-recording LFOs, five additional modulation LFOs, accelerometer control, CV input and a powerful 5 × 30 modulation matrix. The result is a deeply playable instrument with wide sound-design potential and unmistakable Plinky character.Plinky 12 is housed in a sturdy steel enclosure only 12mm thick and includes 12 top-mounted 3.5mm TRS jacks for MIDI, Eurorack CV, clock, audio and hardware integration. USB-C provides power, USB audio, MIDI, serial and WebUSB connectivity, while an SD card slot stores presets, samples and songs. The platform also supports in-browser tools at plinky12.com, including a sample editor, bank creator, MIDI controller designer and coding environment for building custom synths, controllers and instruments in C++ without installing software.Each Plinky 12 version works as a standalone instrument. Blocks expands the original Plinky concept into a multi-timbral groovebox with 10 tracks, clip launching, live editing, insert effects, chord sequencing and piano-roll control. Chords, created by Making Sound Machines, focuses on harmonic movement, expressive voicings and fast musical exploration. Toadstep, created by Toadstool Tech, transforms Plinky 12 into a four-track step sequencer for funky riffs, acid lines, experimental patterns and live improvisation.Because the hardware is built around swappable panels, the same Plinky 12 main unit can become Blocks, Chords or Toadstep by changing the front panel — no firmware upload required. Additional panels are available separately, making Plinky 12 an evolving platform for new instruments, controllers and community-created musical tools.Features• Family of three expressive polyphonic synthesizers: Blocks, Chords and Toadstep.• 16 × 16 RGB matrix with pressure-sensitive capacitive touch pads.• Multi-timbral synth engine with sample playback and wavetable synthesis.• VCF, VCA, wavefolder, ADSR, XY control and extensive modulation.• 5 × 30 modulation matrix, motion-recording LFOs and accelerometer control.• Swappable front panels for changing instrument workflows.• 12 × 3.5mm TRS jacks for CV, clock, MIDI and audio connectivity.• USB-C power, USB audio, MIDI, serial and WebUSB support.• SD card storage for presets, samples and songs.• In-browser tools for sample editing, bank creation, MIDI controller design and C++ development.• Pre-assembled hardware in a 12mm-thin steel enclosure.• Dimensions: 305 × 305mm, 12mm deep.Plinky 12 Blocks• Multi-timbral groovebox-style panel.• 10 tracks for sequencing, performance and editing.• Clip launching, live insert effects and chord sequencing.• Piano-roll view on a pressure-sensitive touch surface.Plinky 12 Chords• Harmonic performance instrument created by Making Sound Machines.• Designed for expressive chords, voicings and progressions.• Fast access to melodic and harmonic movement.Plinky 12 Toadstep• Four-track step sequencer created by Toadstool Tech.• Built for acid lines, funky riffs and generative melodies.• Direct sequencing workflow for live performance and improvisation.Technical specs• Power: USB-C, 5V 500mA.• CPU: RP2350 microcontroller.• Storage: 2MB firmware, 14MB sample flash, SD card support.• Memory: 512k RAM and 8MB PSRAM.• Audio: stereo unbalanced audio input and output, USB class-compliant audio out.• MIDI: TRS MIDI In, 2 × TRS MIDI Out and USB MIDI.• CV: clock in, reset in, clock out, 2 × CV inputs, 2 × CV outputs.• Additional features: stereo microphone, accelerometer and four tactile side buttons.
available
Plinky 12 Chords is an expressive harmonic synthesizer built for fast musical exploration, chord performance and melodic inspiration. Created by Making Sound Machines, Chords transforms the Plinky 12 hardware into a touch-first instrument focused on voicings, progressions and immediate harmonic movement.The 16 × 16 RGB pressure-sensitive touch surface allows direct control over melody, chords and expression, making it easy to move between structured harmony and intuitive performance. The instrument responds to touch, pressure and gesture, turning chord shapes and progressions into a playable, evolving musical surface.Under the panel, Plinky 12 Chords uses the same powerful synth engine found across the Plinky 12 family, combining sample playback, wavetable synthesis, filtering, wavefolding, envelopes, XY automation and deep modulation. CV, MIDI and USB connectivity make it easy to integrate with modular systems, hardware sequencers or studio setups.Features• Harmonic Plinky 12 instrument created by Making Sound Machines.• Designed for expressive chords, voicings and progressions.• 16 × 16 RGB pressure-sensitive capacitive touch matrix.• Touch-first workflow for melody, harmony and performance.• Sample playback and wavetable synthesis engine.• VCF, VCA, wavefolder, ADSR and deep modulation matrix.• CV, MIDI, USB audio and SD card support.• Swappable front-panel system with expandable instrument options.• Pre-assembled in a 12mm-thin steel enclosure.
available
Plinky 12 Toadstep is a four-track step sequencer and expressive synthesizer built for acid lines, funky riffs, generative melodies and live pattern creation. Created by Toadstool Tech, the designer behind the Ectocore Eurorack module, Toadstep brings a fast and playful sequencing workflow to the Plinky 12 platform.The 16 × 16 RGB pressure-sensitive touch matrix becomes a direct performance surface for programming, shaping and transforming sequences. Its four-track structure makes it easy to build rhythmic basslines, evolving melodic patterns and self-generating musical ideas while keeping the workflow immediate and hands-on.Toadstep uses the Plinky 12 synth engine, combining sample playback and wavetable synthesis with filtering, wavefolding, envelopes, XY control, motion-recording LFOs and a powerful modulation matrix. With CV, MIDI, USB audio and SD card support, it works as a standalone instrument, a modular companion or a compact sequencing hub for external gear.Features• Four-track Plinky 12 step sequencer and expressive synthesizer.• Created by Toadstool Tech for live sequencing and improvisation.• Designed for acid lines, funky riffs and generative melodies.• 16 × 16 RGB pressure-sensitive capacitive touch matrix.• Sample playback and wavetable synthesis engine.• VCF, VCA, wavefolder, ADSR and extensive modulation.• CV, MIDI, USB audio and SD card support.• Swappable front-panel system with expandable instrument options.• Pre-assembled in a 12mm-thin steel enclosure.
sold out at the moment
Plinky+ is the enhanced evolution of the beloved Plinky DIY synthesizer, created by mmalex and thoughtfully upgraded in collaboration with Making Sound Machines. It retains full firmware compatibility with the original, while introducing major hardware improvements that elevate its playability, durability, and connectivity.Designed for hands-on expressiveness and modular integration, Plinky+ combines a refined interface with the same lush digital audio engine that made the original a favorite among sound explorers.Upgraded Features:• Expanded Touch SurfaceAll audio and CV jacks have been relocated to the back, freeing up the entire front panel for a larger playing area. The new 22 mm spacing per strip offers keyboard-like ergonomics for precise pitch and pressure control. The redesigned layout also features a full 16 cm strip length for detailed performance gestures.• Larger OLED DisplayA high-contrast, wide-format white-on-black OLED screen replaces the smaller original, offering improved visibility from various angles – perfect for live use and in-studio sessions.• Sturdy Metal EnclosurePlinky+ comes housed in a durable, black powder-coated metal case that keeps it steady on your desk or performance rig. At just under 1 kg, it's lightweight yet solid.• Dust Protection IncludedA clear PET-G lid is included to keep your instrument safe from dust when not in use.• Expanded ConnectivityPlinky+ integrates the full feature set of the original Plinky plus the ABXY CV outputs from the expander – now built in. All I/O is now rear-mounted for cleaner cable management and ergonomic play.• Improved Sound OutputThe analog output section for line, headphone, and Eurorack levels has been completely redesigned for enhanced clarity and dynamic range. Stereo outs now use balanced 6.3 mm jacks, and a dedicated volume knob on the front panel gives you quick access to output control.• Battery-Ready (Optional)While not shipped with a battery, Plinky+ includes a power circuit and connector for retrofitting a battery pack – ideal for portable setups.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All parts are pre-soldered. It's a dry assembly with a screwdriver, similar to the Moog Mavis and Werkstatt.For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
nQuencer is a Eurorack module that turns the AtoV 16n faderbank into a step sequencer.Connect a 3.5mm stereo cable to the i2c socket, patch in a clock and get a pitch and gate output.When the nQuencer module receives a trigger at the Clock input it reads the state of the first 16n Faderbank fader and outputs a corresponding voltage at Output 1. At the next clock signal it will read the second fader and so on until it reaches the end and loops back to the start.Push the reset button or send a gate to the input to move back to the start.If a fader is at the very bottom no gate will be generated for that step in modes that output gates. The last fader that isn't at the bottom determines the length of the sequence.NOTE: Building the nQuencer module involves surface mount soldering using 0603 components and is therefore not recommended unless you have experience with similar projects. Aside from soldering tools you will require a multimeter to calibrate and suitable equipment to programthe microcontroller if you didn’t purchase one with your PCB.Features:Sixteen steps• up to 16 step sequence• out 1 outputs pitch and out 2 outputs a gate• reset button and input move back to the startTwo Eights• splits the 16n faderbank into two halves each with upto 8 steps• out 1 outputs pitch for the left half and out 2 for the right• clock advances both sequences or reset in advances sequence 2 (alt reset in)Transpose• splits the 16n faderbank into two halves each with upto 8 steps• values from the right half (up to 1v) are added to the left• out 1 outputs pitch and out 2 outputs a gate• clock advances both sequences or reset in advances sequence 2 (alt reset in)DJ• splits the 16n faderbank into two halves each with upto 8 steps but only one sequence at a time• reset button switches the output to the other sequence or reset in (alt reset in)• out 1 outputs pitch and out 2 outputs a gateOptions• hold the reset button to enter settings mode, use the faders to change settings and press the button to exit• direction up, down, up down, random• probability chance of a note firing• output voltage range max 1v, 2v, 3v, 4v• fader at bottom note off, output 0v, last fader not at bottom controls sequence length on/off• gate length• alternative reset input mode on/offQuantizer• root note• scale - chromatic (semitones), ionian (major), aeolian (natural minor), harmonic minor, dorian, phrygian, lydian, mixolydian, major pentatonic, minor pentatonic, blues, disabled (unquantised)DIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.