ADDAC System - 200CT Cable Tester
Product information "ADDAC System - 200CT Cable Tester"
Individual Wire Testing - Featuring the ability to test each wire within the ribbon cables independently with dedicated LEDs for every wire, providing a clear visual indication of the status of each connection, wires are also tested against their neighbouring wires to detect shorts.
BUSBOARD MONITOR
The busboard monitor leds allows the user to check the state of the busboard power lines as well as the special CV/Gate functions. If the busboard has no +5v supply the led will be off likewise for the CV/Gate functions if not in use.
This is a desktop device, we provide a long power cable so that it can still be plugged into your rack.
As a safety precaution only power this board when you need to test a cable. Leaving it ON at all times can lead to unintended problematic misuses which, in a worst case scenario, can shorten your Eurorack PSU,
! WARNING !
DO NOT POWER MODULES FROM THE TEST SOCKETS!!
Compatible with all ADDAC System ribbon cables (power, expansions and interconnectivity: 112, 213, 807).
Also compatible with any standard Eurorack power ribbon cable (2x5 to 2x8 or 2x8 to 2x8).
! WARNING !
NOT ALL MANUFACTURERS FOLLOW THESE STANDARDS!
ALLWAYS NOTICE THE ORIENTATION OF THE HEADERS IF YOUR CABLE DO NOT FOLLOW THE STANDARD THEN MOST PROBABLY IS NOT COMPATIBLE.
DIY-Kit-Type:
SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
| Current draw +12 V [mA]: | 30 |
|---|---|
| Current draw -12 V [mA]: | 30 |
| DIY Level: | Easy |
| Format: | 0 HP |
| Panel / Color: | Black FR4 |
ADDAC develops advanced instruments for sonic expression.
We started back in 2009 with an ambition to explore the potential crossover between analog synthesizers and computers. Because our first creations sparked a lot of attention, we decided to work hard and put them in your hands.
Today our product line is focused on a new breed of hybrid synths, that make use of the best of both the digital and analog worlds. We've grown to be able to reach thousands of enthusiastic clients, friends and collaborators. Always looking into conceptualizing and developing the most exquisite instruments, we hope you're able to join and share this passion with us.
Our solutions can be found in many personal studio throught the world, owned by musicians in several planes of stardom. We especially appreciate seeing them being used in a very wide range of musical genres.
Login
Manufacturer / Hersteller:
ADDACSystem, Lda.
Av. Eng. Arantes e Oliveira 5, S/Lj E
1900-221 Lisbon
Portugal
addac@addacsystem.com
Product Safety Information
Please read this safety guide before installation or use.
Important Notice & Intended Use
• This kit is intended for adult users experienced in electronics and modular synthesis.
• Assembly, including soldering, is required.
• Proper testing and installation are essential to ensure safe and functional operation.
• The completed product is intended as a desktop / standalone unit and is powered by an external DC power supply or battery.
General Warnings
Electrical Hazards:
• Make sure the power supply matches the voltage and current ratings specified for the device (see the product manual). Using the wrong voltage can damage the module and create a safety hazard.
• Wrong polarity can damage your device, make sure the unit is connected with correct polarity.
Heat Generation:
• The device or power supply may generate heat during operation. Do not cover one of them.
Sharp Edges:
• The device’s faceplate and components may have sharp edges. Handle with care to prevent cuts or scratches.
Small Parts:
• Contains small parts that could cause a choking hazard. Keep away from children and pets.
Compatibility:
• This module is intended for use only with devices operating at Eurorack or line level. Connecting it to incompatible systems may cause damage or malfunction.
Assembly Requirements
• Soldering skills are required to complete the unit.
• Ensure a clean, well-lit and ventilated workspace free of flammable materials during assembly.
• Use appropriate tools and safety equipment, such as eye protection.
Testing
• Test the module thoroughly for shorts or incorrect assembly before powering it up. When the unit has malfunctions due to incorrect assembly, the unit or power supply might be damaged.
• Use a multimeter or other appropriate tools to confirm proper functionality.
Installation and Use
• Use only the included or manufacturer-recommended power cable and/or power supply.
• Follow the module's user guide for instructions on operation. Do not exceed the input/output limits specified.
Responsibility
Users are solely responsible for proper assembly and testing. Contact manufacturer support for assistance if needed.
Environmental Safety
• Dispose of the module, its components, and packaging in accordance with local electronic waste regulations.
Liability Disclaimer
• The manufacturer or distributor is not responsible for any injury, damage, or malfunction resulting from improper installation, use, or modification of this product.
Contact Information
For further information visit the manufacturers homepage or shop support team at:
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Nonnenstrasse 19, 04229 Leipzig, Germany
support@exploding-shed.com