4ms - Meta Module (Assembled)
available
The MetaModule puts real knobs and jacks on virtual software modules. Step back from the computer and make music with hardware, while keeping the flexibility and expandability of software.THIS PRODUCT IS ASSEMBLED AND NO DIY!The MetaModule comes with over 160 built-in modules from 4ms Company, Befaco, HetrickCV, NonlinearCircuits, and Scanner Darkly, plus clones of popular classics such as the Mutable Instruments Eurorack modules, fun physical modeling algorithms, and lots of handy utilities.All of the included modules are also available on the computer using the free program VCV Rack. Whether you make patches on VCV Rack and transfer them to the MetaModule, or if you just create patches directly on the MetaModule, there are plenty of creative modules to inspire new ways to make music.MetaModule PluginsIf the 160+ built-in module aren’t enough, you can load more modules as plugins. Already there are over 200 modules in third-party plugins from Bogaudio, Valley, ChowDSP, NANO Modular, and the list is growing. We have an SDK available to make it easy for VCV Rack plugin developers to convert their plugin to a MetaModule plugin. Our licensing terms are non-restrictive: developers are welcome to distribute their plugin in any way they wish, commercially or not.Mapping Knobs and JacksThe MetaModule has 12 knobs that can be mapped to virtual knobs. Each knob can be mapped to up eight virtual knobs, and each mapping can have a different range and offset. You also can save a group of mappings as a Knob Set and switch between Knob Sets with the encoder. You also can map the 8 inputs and 8 outputs to virtual module jacks. Also, the MetaModule is a USB MIDI host, so you also can map MIDI CC, note, gate, and other parameters to knobs and jacks.ExpandersThere are lots of ways to customize your MetaModule. A Wifi expander allows you to wirelessly transfer patches from your computer. Add eight more knobs with the Knob expander, or buttons with the Button expander. A CV/Audio expander adds more high-resolution inputs and outputs, and the Gate In/Out expander adds not only gate jacks but also TRS MIDI and I2C.Under the HoodThere are six CV/Audio inputs, two gate inputs, and six CV/Audio outputs. The CV/Audio jacks are all 24-bit, 48kHz DC-coupled, -10V to +10V. A USB-C jack accepts MIDI devices and thumb drives. Patches and plugins can be loaded via a USB drive or microSD Card, and internal flash memory lets you save patches you always want to come back to.The processor is more advanced than anything 4ms has used in the past, and is among the most powerful processors found in Eurorack. Startup time and latency are blazingly fast.Features:Patches• Patches are loaded from microSD Card, USB drive, or via the Wifi expander• Patches can be optionally saved onto internal flash memory• Create patches using VCV Rack or directly on MetaModule• Patches can be given a name and descriptionMappings• Map each physical knob to up to 8 virtual knobs• Set range and offset for each mapping, including inverted control• Knob mappings are grouped into Knob Sets, and changing Knob Sets can be done quickly without menu-diving• Map physical jacks to virtual jacks, seamlessly making splits/mults• Add or edit modules, cables, and mappings in real-time while the patch is playing• Create alias names for mappings like "Kick Drum Level"Interface• Simple, intuitive graphical interface lets you zoom in on details, or zoom out to get a big picture• Patch View displays the patch as faceplates and cables, with knobs, buttons, and lights animating in real-time• Knob Set View simplifies the display, showing only the mapped knobs for the current Knob Set• Module View shows just one module and lists the names of each jack, knob, and control legibly• Mapping View lets you adjust details of a knob mapping• Adjust styles and visual preferences to your liking• Save, rename, duplicate, and delete patches• Firmware updater and plugin loader read from microSD Card or USB driveHardware• 12 Knobs• 8 CV/Audio outputs, 24-bit 48kHz, -10V to +10V, DC-coupled• 6 CV/Audio inputs, 24-bit 48kHz, -10V to +10V, DC-coupled• 2 Gate inputs• USB-C jack: MIDI Host or MSC (External drive) Host• microSD Card slot• Internal Flash RAM for additional patch storage• Dual-core 800MHz Cortex-A7 plus Cortex-M4 co-processor• 512MB DDR3 533MHz RAM• Bare-metal operation for fast startup and low latencyDIY-Kit-Type:Assembled unit. This is completely ready to use, nothing to solder or to assemble.
€649.00*
4ms - MM-WIFI (Assembled)
available
Enjoy the convenience of wireless control with the MetaModule Wi-Fi Expander. Effortlessly connect your MetaModule to your computer or mobile device via a standard web browser, eliminating the need for swapping USB drives or physical storage media.Features:• Wireless connection to existing Wi-Fi networks (2.4GHz, 802.11 b/g/n)• Easy connection to your MetaModule via included 2x4 ribbon cable• Remote patch management and browsing through standard web browsers• Firmware updates handled by the MetaModule itself, ensuring future expandability and compatibility
€109.00*
AtoVproject - Faderpunk (Assembled)
available
NO DIY – THIS UNIT IS FULLY ASSEMBLEDFaderpunk is a modular, customizable modulation ecosystem for Eurorack and semi-modular setups. Built around six tactile faders and channelized app-driven firmware, Faderpunk turns empty jacks into dynamic modulation sources, MIDI bridges and performance tools. Run multiple apps at once – LFOs, sequencers, envelopes, quantizers, Turing machines, CV-to-MIDI and MIDI-to-CV converters, random generators and rhythm engines – then reconfigure the system instantly with the web-based app manager. Deep integration with MIDI and CV means Faderpunk speaks both languages fluently, letting you combine hardware and software workflows to create hybrid modulation rigs that are playable, programmable and uniquely yours.A browser configurator (connect Faderpunk to a computer and visit the web interface) makes app management drag-and-drop simple, while a developer-friendly API lets you build custom apps and extend the platform. Physical customization includes a set of stickers for control labelling and configurable RGB LEDs for visual feedback, giving you immediate, readable state information during performance. Compact, hands-on and open, Faderpunk is a versatile modulation hub for live rigs, studios and DIY instrument projects.Features:• Modulation platform: run LFOs, sequencers, envelopes, randomizers, quantizers, Turing machines and more.• Hybrid MIDI + CV workflows: MIDI-to-CV and CV-to-MIDI bridging for seamless hardware/software integration.• 16 channels comprised of: CV jack configurable as Input or Output (0-5V, 0-10V or +/-5V range) and a Mechanical RGB backlit button • Web-based configurator with drag-and-drop app management (connect device to your computer to access).• Developer API for creating custom apps and extending functionality.• Configurable RGB LEDs for clear visual feedback and live performance cues.• Sticker set for personalized control labeling and ergonomic mapping.• Ideal as a modulation source, sequencer, MIDI bridge or performance controller in Eurorack and semi-modular systems.
€649.00*
Befaco / Divkid - Stereo Strip
available
Stereo Strip takes the idea of a channel strip and makes it modular. We hope that by bringing this long-established component of the audio engineering world into the Eurorack environment and by adding CV control over its key parameters that you will find new, creative ways to use it in your patches!It features stereo inputs and outputs for audio or CV with EQ, voltage controlled panning, stereo VCA, performable mute and input/output level switching for Eurorack or line level uses. Abusing the input level switching allows for some musical, modulate-able and highly shapeable distortion sounds too.Stereo Strip was designed to be a creative part of a modular patch. Creating stereo images from mono sources, shaping and modulating existing stereo images, synthesising stereo pseudo ring modulation, sweetening FX with EQ or drastically wave shaping your oscillators, creating send FX routings with benefits or it can simply be used as a channel strip at the end of chain in a patch.The addition of line level gain boosting (for the input) or reduction (for the output) allow it to work as a stereo input or output interface for external gear with the advantage of the VCA, panning and the EQ to shape the sound. Experiment with bringing external gear into the Eurorack format and then shape and modulate those sounds them on the way in!Try patching Stereo Strip anywhere you would place a VCA in a system and/or explore its EQ and voltage controlled panning, which are rarer additions to the sound sculpting options for the Eurorack format.This module is designed in collaboration with Ben Wilson aka Divkid.Features:• 3 band EQ• Panning (manual and voltage controlled)• VCA level control (manual or voltage controlled)• 3 way performance muting (on-off-momentary)• Soft clipping limiter (distortion!)• Line level input and/or output adjustmentDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€117.81*
Electrosmith - Patch (Assembled)
sold out at the moment
Daisy Patch is a metamorphic sound environment built on the Daisy DSP platform, a blank-slate hardware design that can transform into a wide range of digital instruments.The unit provides quad 24-bit audio I/O (up to 192 kHz) and a browser-based programmer for uploading a growing library of ready-to-run firmware – samplers, granular engines, physical-model voices and more – without the need for special upload tools.Custom firmware is authored with Pure Data, Arduino, Max/MSP Gen~, or C++, and starter templates accelerate development. Onboard USB connectivity and a high-resolution OLED simplify debugging and real-time interaction, making the Patch both a performance device and a development platform.The package includes one Daisy Seed (65 MB) and ships as an open-source DSP platform ready for experimentation, prototyping, and deployment as a compact standalone instrumentFeatures:• Open source DSP platform• Vast library of ready to go firmware files• Quad 24-bit audio IO, up to 192kHz• MIDI IO (TRS+USB)• High res OLED display
€375.00*
Electrosmith - Patch.Init() (Assembled)
sold out at the moment
If you can code it, you can make it – patch.Init() is an open-source Eurorack development interface built around the Daisy Patch Submodule that converts the submodule into a versatile DSP module.Supplied with a Daisy Patch Submodule, the platform pairs a utilitarian front panel (open-source under MIT) whose parameter names match the code with high-fidelity audio performance: 24-bit, 96 kHz sample rate, an STM32 H7 processor and 64 MB of SDRAM. Stereo I/O and the Patch Submodule’s I/O options enable everything from samplers and granular processors to reverbs, glitchy effects and complex oscillators, while the freely available front-panel files let designers adapt the hardware for bespoke or commercial modules without licensing friction.Features:• Eurorack development platform for the Daisy Patch Submodule• High Fidelity Daisy architecture: 24-bit, 96kHz sample-rate, 64MB SDRAM, STM32 H7 processor• Stereo I/O• Utilitarian design, with code-matching front panel parameter names
€225.00*
Electrosmith - Pod
sold out at the moment
The Pod is a compact USB-powered breakout board for the Daisy, bundled with a Daisy Seed (65 MB), that brings stereo line-level I/O, a headphone output with dedicated volume control and a TRS MIDI input into a small development-friendly package.Onboard controls include two push buttons, two RGB LEDs and a rotary encoder with push switch, while an SD-card slot and a secondary micro-USB port expand connectivity for standalone projects. Designed as a convenient prototyping companion, the Pod provides the essential audio and control interfaces needed to move a Daisy project from idea to playable hardware. Note: powering the Pod from a computer can introduce hum via ground loops; using an external USB power source typically improves audio performance.Features:• USB Powered• 3.5mm stereo jacks for line level audio I/O, headphone output, and TRS MIDI input.• Built In headphone amplifier with dedicated volume control.• 2 Buttons, 2 RGB LEDs, and rotary encoder with push button.• SD Card Slot, and secondary USB micro port
€99.00*
Erica Synths - Bullfrog (Assembled)
only 1 left
When you start out into synths and synthesis, Bullfrog is worth every cent for the synth itself and the provided brilliant learning materials. You'll go home with lots of knowledge!Created by Erica Synths & Richie Hawtin, Bullfrog is an educational electronic music instrument designed to captivate and inspire both youth and professionals alike. Bullfrog invites you to unlock musicality while combining the thrill of electronic music production with a comprehensive learning experience.Bullfrog is a classical subtractive synthesizer - it consists of several “modules” for sound generation - VCO, NOISE GENERATOR - and treatment - VCF, VCA/DELAY, as well as “modules” that generate control and modulation signals to control them - ENVELOPE GENERATORS and SAMPLE & HOLD. The Bullfrog will not make the sound on its own unless it is patched - using eurorack patch cables to interconnect the “modules” or by inserting voice cards that create internal connections between the “modules” in a specific way and add extra functionality, like sampler/looper, sequencer, groovebox, etc. This approach better helps to understand the functionality of a subtractive synthesizer and the principles of sound design with instruments like these.What’s included:• BULLFROG synthesizer• Universal 12VDC wall wart adapter• User manual• 10 patch cables• 3 pre-patched voice cards: Sequencer, Acid Bassline, Sampler Looper• 3 DIY voice cardsIn order to provide a well-rounded understanding of the functionality of this synthesizer and sound synthesis in general, a comprehensive user manual is created to accompany the learning process. Use the buttons below to get to the project pages.Features:• Fully analogue design• Highly accurate voltage controlled oscillator (VCO) that tracks great over 8 octaves• Manually adjustable and voltage controlled waveshapes - sine-shark fin and pulse wave with pulse width modulation (PWM)• Zener diode-based noise generator• Resonant lowpass voltage controlled filter (VCF)• Voltage controlled amplifier (VCA) with adjustable offset• Delay effect with adjustable delay time and feedback amount• Two looping attack-sustain-release envelope generators (EG)• Sample & Hold circuit with an individual clock• Manual gate button• Voicecard slot• Built in speaker• DIN5 MIDI input• USB connector• Dimensions: 40 x 385 x 210 mm• Weight: 1.8 kg
€590.00*
Exploding Shed - Touch Source (Assembled)
only 1 left
Explore wireless patching through Touch Points! Touch Source generates voltages between -10V and +10V, in the center is a touch plate with GND/0V. Place the Touch Points on any CV input of a module and connect a voltage to the Touch Point via your fingers. Or connect two Touch Points from any input to output through your body. Rule #1 is: there are no rules!Here is a review on Amazona (german) and some demo videos here and there.Touch Source includes 2 black Touch Points. Packs of 5 Touch Points are available separately in black or orange to visualize your signal flow. Packs of 2 indicator Touch Points with bi-plar LEDs are also available.The unit is pre-assembled and no DIY.
€40.00*
LeafAudio - Contact Microphone
available
This is the new 2025 contact mic version. With a contact microphone, any surface or object becomes a canvas for sonic exploration. Unlike traditional recording methods that capture sound waves traveling through air, contact microphones pick up vibrations directly from materials – allowing you to "listen" to objects, plants, or even soil from the inside out. This unique perspective unlocks a world of intriguing and sometimes abstract sounds, making it an essential tool for experimental recording and sound design. The 2025 edition of LeafAudio’s popular contact microphone has been completely re-engineered for maximum flexibility and features full electrical shielding for optimal performance.This upgraded model comes in a set with a durable neoprene zip-bag, ensuring safe transport while providing space for all included accessories. Thanks to its universal clamp mechanism and strong rubber bands, it can be mounted on almost any surface. Additionally, the newly developed probe mechanism — created in collaboration with sound designer Robert Dudzic — lets you capture sounds even from inside objects, soil, and more, expanding the creative possibilities even further.Equipped with a high-quality 2m (6.5ft) SC-Onyx Tynee cable by Sommer Cable, the microphone is available in two versions: one with a 3.5mm (1/8") Amphenol connector and another with a 6.3mm (1/4") Hicon connector. Includes:• Contact microphone• Neoprene zip-bag• Universal holder• Probe mechanism• 2 rubber bands• Allen key
€89.00*
LeafAudio - Field Amp
available
Field Amp is LeafAudio's solution for the world of body sound transmission: recording the world with contact microphones. It provides high-gain, noise-free amplification and impedance conversion to ensure the best possible sound quality from your contact mics.After releasing our Microphonic Soundbox, the team of LeafAudio quickly realized they’d hit a sweet spot. Many sound designers praised its clean, noise-free amplification – even if they didn’t need the Soundbox itself. So they created a standalone solution: the Field Amp. If you want the Soundbox amp without the box, the Field Amp is your new best friend. Perfect for studio work, field recording, sound installations and creative sound design of all kinds.Quality amplification & power management circuitry. No noise or beeping can be heard or seen in the spectrum, not even above the hearing range, which would come into focus later during sound manipulation processes. You can record with high sampling rates, transpose the audio by a lot and enjoy your pure sound. Just the clear, pristine audio you want to capture with your contact microphones.Optimised for travelling. The small unit is fully portable, light, offers many mounting possibilities. A professional case is included, which also can carry your contact mics, batteries and cables.Body sound transmission vs. airborne sound. We’re used to hearing the world the way our ears do—through air. Sound travels through the air before reaching our eardrums or a microphone. But with contact microphones, you change that perspective. Instead of hearing the surface of materials, you hear from within them. This shift opens up a powerful trick for sound design. It reveals a hidden world of textures and tones that are normally out of reach. Give it a try—there’s an entire universe of sound waiting to be discovered.Field Amp is optimised for Hi-Z signals of contact microphones. It also acts as an impedance converter with a powerful output signal. No loss of signal quality when you keep the wiring short between microphones and the input. The output is a strong signal and you don't have to worry about a few meters of cable.We recommend using the shielded contact microphones by LeafAudio. Generally you can try contact mics with our pre-amp, hydrophones, or guitar pickups. We offer separate adapters for both input and output to ensure compatibility with all your devices.Features:• Low-Noise pre-amp for contact microphones• Case included• 9V DC power supply or battery• USB-C to barrel connector adapter cable included• Up to ~50x adjustable gain• 1 mono input• 2 mono outputs (one -12 dB)• All connections 3.5 mm (1/8") mono jack• Input impedance: 3,3M Ohm• Output impedance: 1k Ohm• 12 x 12 x 3.4 cm• 410 g (incl. case & USB-C to barrel cable)• 1/4"-UNC mount on top and bottom for camera tripods etc.
€189.00*
LeafAudio - Geophone L
available
The Geophone is a omnidirectional seismic sensor that captures low-frequency vibrations. Besides detecting seismic activity, the Geophone can be used to capture extreme low-end for sound design, music production, field recording, foley and game sound.We offer two versions to meet your budget and your needs: Geophone S and Geophone L. Both come in a protective hard case, equipped with a magnet, steel spike, clamp and suction cup.We offer an add-on pack for both versions - it includes a variable clamp that allows the angle to be continuously adjusted to optimize their sound performance, a special woodscrew and an adapter from M4 to 1/4" universal camera mount.Geophone L has an extended frequency range and sensitivity over Geophone S.* Due to the nature of Geophones it might be possible that it picks up electromagnetic fields and interferences in some areas. Please note that the Geophone itself, and also the included magnets might have unwanted effects on credit cards, hard disks, ICDs and other devices that work on the basis of electromagnetism!Features:• Height / width: 76 x 42 mm• Weight: 250 g (Geophone L with cable & XLR)• Weight: 472 g (incl. case and included add-ons)• Case• 2,0 m cable with balanced XLR• Frequency range: 15 Hz - 1000+ Hz• Impedance: 5222 Ohm• Distortion: 0,05 %• Sensitivity: 74,8 V/m/s
€270.00*
LeafAudio - Geophone S
available
The Geophone is a omnidirectional seismic sensor that captures low-frequency vibrations. Besides detecting seismic activity, the Geophone can be used to capture extreme low-end for sound design, music production, field recording, foley and game sound.We offer two versions to meet your budget and your needs: Geophone S and Geophone L. Both come in a protective hard case, equipped with a magnet, steel spike, clamp and suction cup.We offer an add-on pack for both versions - it includes a variable clamp that allows the angle to be continuously adjusted to optimize their sound performance, a special woodscrew and an adapter from M4 to 1/4" universal camera mount.Geophone L has an extended frequency range and sensitivity over Geophone S.* Due to the nature of Geophones it might be possible that it picks up electromagnetic fields and interferences in some areas. Please note that the Geophone itself, and also the included magnets might have unwanted effects on credit cards, hard disks, ICDs and other devices that work on the basis of electromagnetism!Features:• Height / width: 70 x 38 mm• Weight: 214 g (Geophone S with cable & XLR)• Weight: 436 g (incl. case and included add-ons)• Case• 2,0 m cable with balanced XLR• Frequency range: 28 Hz - 1000+ Hz• Impedance: 1850 Ohm• Distortion: 0,2 %• Sensitivity: 28 V/m/s
€190.00*
LeafAudio - Microphonic Playground
available
Microphonic Playground is the newest addition in our series of sound design instruments. Like its bigger sister, the Microphonic Soundbox, it's a playground for sonic exploration of any kind. It can also be your inexpensive entry into the Soundbox world before you possibly upgrade later.It works through body sound transmission on basis of a contact microphone. In comparison to airborne sound transmission (via a microphone), all sounds created on the box can be listened to in a very intimate and direct way. Imagine it like listening to the materials from the inside, very much in an ASMR way.The difference to the Microphonic Soundbox are two things:1) It is passive, has no active amplification and needs no power supply.2) It's an open playground with no audio sources or objects built into it, so you are free to attach everything to it what you can imagine.To get you started with ideas we now offer a variety of add-ons, that can be used with both the Microphonic Soundbox and the Microphonic Playground.The unit has an audio input and an output. Its audio output can be amplified by the external input of a Microphonic Soundbox and therefore act as an extension. Or it can be amplified by any pre-amplifier, mixing desk or audio interface. Multiple Playgrounds can be cascaded in series. Play it on its own, or extend your Microphonic Soundbox with one or two Playgrounds and some of the new add-ons.You're free to use it as a platform for sonic experimentation or just convert it into a Bass Kalimba, for example, and leave it that way. Please choose your own way to play with it and let your imagination and creativity guide you.Features:• built in contact microphone• passive, no power supply needed• many mounting possibilities for add-ons through five threaded M3 strips• universal wooden object holder on the side• four M3 thumb screws included• 1 audio input, 1 audio output• multiple units can be linked• soft rubber feet• 162 mm x 147 mm x 60 mm (w/d/h)• 0,244 kg
€99.00*
LeafAudio - Microphonic Soundbox mk2
available
The Microphonic Soundbox is an instrument for experimental sound creation. It features a resonant wooden body equipped with contact microphones, battery-powered low-noise preamps and a variety of sound-generating surfaces, including springs, rods, textured panels and a kalimba. Use it standalone to create textures and samples or pair it with delay and loop-based effects for evolving soundscapes.The Instrument features a range of playable surfaces and objects that allow the creation of unheard sounds and textures. The main components are:• Two metal rods – you can excite them with a stick or similar to get bell-like sounds, or play them with a bow to create ethereal–metallic tones. Pitching recordings down reveals deep metallic drones.• Three metal springs – pluck, pull or whip them to produce vintage reverb-like spring sounds.• Sandpaper surface – scratch it with different objects and materials to create sounds ranging from soft whispering to harsh scraping noises.• Kalimba with 5 strips – play harmonic melodies or use the freely tunable mechanism to explore microtonal tunings. Transposing these recordings down can create low bass patterns.The Soundbox is designed to be modular, featuring M3 threaded strips that allow additional objects to be attached using thumb screws.To pick up the vibrations created by the surfaces and objects, two contact microphones are built into the instrument. One is placed at the centre for the kalimba, rods, springs and sandpaper. The second is positioned at the side to capture sounds from attached objects.The internal preamp is specially designed to amplify contact microphones, delivering low-noise amplification with precise detail – allowing you to boost even the smallest and quietest objects and turn them into cinematic, gigantic soundscape.Two Channels, One Input, Two OutputsThe Microphonic Soundbox offers two independent amplifier channels and a 1/4″ input for external contact microphones, enabling extended routing options. The Microphonic Playground can serve as an extension as well to multiply your sonic possibilities.Output 1 provides a mono mix of both channels. Using Output 2 alongside Output 1 splits the channels, allowing the Soundbox to be played on one output while the second one functions as an amplifier for an external contact microphone.Expand the Soundbox with Add-ons for New Sonic DimensionsThe Microphonic Soundbox is designed for experimentation and for playing with different objects, materials and surfaces. You are free to use whatever you like to develop your own signature sounds. To help you get started, we’ve developed several Add-on Packs that create interesting sounds straight out of the box.Features:• Two channels with internal contact microphones• Battery powered low noise pre-amps (~100x / ~40dB Gain)• Two outputs: mixed mono or channels separated• Channel one can act as pre-amp for external input• Multifunctional holder, based on M3 threaded strips (left side & under Kalimba)• Removable Kalimba• Soundbox is a hub for external contact mics: use channel 1 as pre-amp on out 1 while play the actual Soundbox on out 2• Output features an attenuator switch• Power management switches the LED from blue to red when battery goes under 7 volt• Soft grip rubber feet for acoustic decoupling• Removable metal rods which come in a plastic tube which is great for transpor
€253.00*
Metal Case and Dust Cover for Plinky
available
As the original Plinky has no proper case, Making Sound Machines designed this slim enclosure to make the synthesiser more sturdy. In addition, they created a cover to protect the Plinky from dust. With these two additions, the Plinky becomes far more portable and robust.Every revision of the original Plinky will fit in the Case.
€49.00*
Music Thing Modular - 16mb Workshop Blank PGM Card Set
available
Important: These cards might look like Micro SD cards, but they're not! Workshop program cards use a unique, proprietary format specifically designed for the Music Thing Modular Workshop System.This set includes two blank 16MB cards, ready for programming your own creations and ideas. An excellent example of what's possible with the larger 16MB cards is Brian Dorsey's Backyard Rain – you can explore and download it directly from GitHub.New programs and creative tools for the Workshop cards are constantly being developed by the community. For details on current programs, check out the comprehensive Workshop Computer Guide, or subscribe to the free Workshop System Newsletter to stay informed about the latest additions.These program cards store the complete flash memory used by the Workshop’s RP2040 microcontroller. Because of this, the Workshop Computer itself doesn't hold any permanent firmware. Everything lives on the program cards.Cards are easy to program, update, or reprogram via USB with a straightforward drag-and-drop method. You can create your own software in C/C++ (using Pico SDK), Arduino Pico, Circuit Python, or any other compatible programming environment for the RP2040 chip.
€17.50*
Music Thing Modular - 2mb Workshop Blank PGM Card Set
available
Important: These cards might look like Micro SD cards, but they're not! Workshop program cards use a unique, proprietary format specifically designed for the Music Thing Modular Workshop System.This set includes three blank 2MB cards, ready for programming your own creations and ideas. New programs and creative tools for the Workshop cards are constantly being developed by the community. For details on current programs, check out the comprehensive Workshop Computer Guide, or subscribe to the free Workshop System Newsletter to stay informed about the latest additions.These program cards store the complete flash memory used by the Workshop’s RP2040 microcontroller. Because of this, the Workshop Computer itself doesn't hold any permanent firmware. Everything lives on the program cards.Cards are easy to program, update, or reprogram via USB with a straightforward drag-and-drop method. You can create your own software in C/C++ (using Pico SDK), Arduino Pico, Circuit Python, or any other compatible programming environment for the RP2040 chip.
€17.50*
Nyström - Crum Drum
available
Crum Drum is a 4-voice drum machine with built in randomization and probability based sequencing designed by NYSTRÖMRhythms can be created and manipulated using the internal random sequencer or externally via MIDI USB. Press the beat button to generate new rhythms, adjust the probability to create continuous variations, and increase the randomness to modulate the sound of your beats! Generated sequences can also be sent out via MIDI USB and Crum Drum can also sync via analog clock in and out.The four voices of Crum Drum are Kick, Snare, HiHat and Bass (FM). There are 8 parameters knobs to sculpt the character of each voice allowing for wide variety of tones. It’s easy to create varied and organic sequences by adding modulation via the Probability and Randomness controls. Probability sets the chance that the selected voice will play per step of the sequence, while randomness increases the parameter modulation for each voice. The higher the randomness, the more each instrument parameter is modulated per step. Some of the instrument parameter controls have different behaviours depending on which voice is selected, so make sure to check the user manual for full details.Crum Drum features four global effects which are: Overdrive, Reverb, Delay and Swing. The delay-time is tempo synced and the subdivided differently dependent on the BPM.Power is provided via micro usb cable (not included)Features:• 4 instruments: Kick, Snare, HiHat, Bass• 8 sound parameters per instrument• Overdrive, Reverb, Delay & Swing• Send & Recieve Analog & Midi USB clock• Send & Receive Midi USB sequencing• Randomised and probability based sequencing
€225.00*