Screws & Nuts
available
Bananuts are anodized alluminium custom minijack nuts, following Buchla/Serge coloring code.Perfect to code your inputs and outputs with colors or just give a touch of beauty to your favorite gear. One bag contains 25 pcs.Compatible Jacks:• PJ301M-12 (Thonkiconn)• PJ398SM (Thonkiconn)• PJ366ST (Green Stereo Thonkiconn)• PJ301BM• PJ398S-BM• PJ301CM• PJ302M• 161-3502L-E (Kobiconn)Features:• Eight colors available following the Buchla/Serge color code: Blue, Purple, Red, Orange, Yellow, White (actually silver), Green and Black.• Anodized Aluminium• 1 bag = 25 pcs.
available
Knurlies are the first screws out there specially designed for eurorack. Engineered with love by Befaco to make re-arranging your case a matter of minutes!Knurlies can be fastened by hand, Phillips, slot or Allen. And brings a plastic washer already in place to avoid rack rash.These screws are M3/M2,5 x 7 mm so they can be used also on those 3 mm thick panels as well as regular 2 mm ones.Features:• 7 mm long• Phillips, slot, Allen and thumb enabled!• Flat-tight Washer to avoid rack rash.
available
M3 slide nuts for Eurorack rails. This are packs of 50 pieces. They can be used as an alternative to our threaded strips for all Eurorack rails.
available
These M7 x 0.75 black hex nuts offer a fine thread pitch, durable steel construction, and corrosion resistance—ideal for mechanical and applications.They Work Prefectly with:Song Huei - R16K1TAYDA - Potentiometer with Solder Lug B50k
available
Silver Knurled Nuts M6 x 0,5 mm. They can be used for Thonkiconn and similar 3,5 mm audio connectors. Available in bags of 20 and 50 pieces.Available variations:• Hex Nuts• Knurled Nuts• Smooth Nuts
available
Black Knurled Nuts M6 x 0,5 mm. They can be used for Thonkiconn and similar 3,5 mm audio connectors. Available in bags of 20 and 50 pieces.
available
A set of 4x raised thumb screw M3 x 0,5 (20mm length including a spacer) for Microphonic Soundbox, Microphonic Playground and many other applications.
available
A set of 4x thumb screw M3 x 0,5 (16mm length) for Microphonic Soundbox, Microphonic Playground and many other applications.
available
The M3 x 0.5 screw (6mm thread length) is normally used to connect Eurorack modules and rails.These are supplied in packs of 10.
available
M5 screw (20mm thread length), DIN 965 countersunk head PH drive.For connecting side-parts of your case and rails.
available
M5 screw (20mm thread length), DIN 7985 dome head PH drive.For connecting side-parts of your case and rails without side-brackets.
available
M5 screw (20mm thread length), DIN 966 raised countersunk head PH drive.For connecting side-parts of your case and rails without side-brackets.Mix between countersunk and dome head, sinks in about 50%.
available
Self-tapping M5 screw (25mm thread length), DIN 7516 countersunk head Torx drive (TX25).Recommended screw for connecting side-brackets to our rails.
available
M5 screw (30mm thread length), DIN 965 countersunk head PH (Phillips) drive.For connecting side-parts of your case and rails.
available
M5 screw (30mm thread length), DIN 7985 dome head PH drive.For connecting side-parts of your case and rails without side-brackets.
available
M3 screw (30mm thread length), DIN 966 raised countersunk head PH drive.For connecting side-parts of your case and rails without side-brackets.Mix between countersunk and dome head, sinks in about 50%.
available
Silver Smooth Nuts M6 x 0,5 mm. They can be used for Thonkiconn and similar 3,5 mm audio connectors. Available in bags 20 and 50 pieces.Available variations:• Hex Nuts• Knurled Nuts• Smooth Nuts
available
These M9 x 0,75 black Smooth nuts offer a fine thread pitch, durable steel construction, and corrosion resistance—ideal for mechanical applications.