Tools
sold out at the moment
Introducing ADDAC’s Cable Tester, a desktop utility that provides a reliable means to test the integrity of both mono jacks and ribbon cables, ensuring that every connection is secure and electrically sound.Individual Wire Testing - Featuring the ability to test each wire within the ribbon cables independently with dedicated LEDs for every wire, providing a clear visual indication of the status of each connection, wires are also tested against their neighbouring wires to detect shorts.BUSBOARD MONITORThe busboard monitor leds allows the user to check the state of the busboard power lines as well as the special CV/Gate functions. If the busboard has no +5v supply the led will be off likewise for the CV/Gate functions if not in use.This is a desktop device, we provide a long power cable so that it can still be plugged into your rack.As a safety precaution only power this board when you need to test a cable. Leaving it ON at all times can lead to unintended problematic misuses which, in a worst case scenario, can shorten your Eurorack PSU,! WARNING !DO NOT POWER MODULES FROM THE TEST SOCKETS!!Compatible with all ADDAC System ribbon cables (power, expansions and interconnectivity: 112, 213, 807).Also compatible with any standard Eurorack power ribbon cable (2x5 to 2x8 or 2x8 to 2x8).! WARNING !NOT ALL MANUFACTURERS FOLLOW THESE STANDARDS!ALLWAYS NOTICE THE ORIENTATION OF THE HEADERS IF YOUR CABLE DO NOT FOLLOW THE STANDARD THEN MOST PROBABLY IS NOT COMPATIBLE.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
available
The Application Putty is designed for mounting contact microphones on a wide range of instruments and surfaces. It provides a strong yet removable bond for reliable positioning and effective sound transmission.Depending on the surface and application time, residues or marks may occur on sensitive materials such as certain wood finishes. Please test carefully before use and avoid leaving the putty attached for extended periods.For best results, use only a small amount of putty. When removing the Contact Microphone, avoid pulling with force – gently twisting it sideways is recommended to prevent damage to the microphone or surface.This item includes 10 cm of Application Putty.
available
Double sided, transparent adhesive dots, 25 mm. Professional industrial quality - once they stick, they stick! Extremely thin and durable. They are perfect for fixing our piezo contact mics somewhere for permanent installation.
available
This compact, easy-to-use cable holder makes joining wires fast and precise. Simply insert the two cable ends into the holder and solder them together at the center. The secure grip keeps wires aligned so you get clean, reliable joints every time.This small tool speeds up the tedious process of soldering cables, reduces hand fatigue and improves solder quality.
available
Desoldering braid (also known as desolder wick) with flux in dispenser.2 m, 2 mm wide. In some cases you cannot use a desolder pump, then this stuff here is the way to go. Very handy for example to clean holes on a PCB.If you need tips on how to use the tool, you can check out our Synth DIY Guides.
sold out at the moment
The de-soldering pump is a tool used to remove solder from your PCB.The tool is made of aluminium and features a heat-resistant nozzle, allowing you to get close to your soldering iron.If you’ve soldered the wrong component or spilled solder into the wrong hole – the de-soldering pump is your friend.If you need tips on how to use the tool, you can check out our Synth DIY Guides.
available
The Dust Brush is the perfect tool for gently removing dust and dry debris from your synthesizers, audio gear and other sensitive equipment. Designed to reach into tight spaces without causing scratches or damage, it helps keep your setup clean, functional and looking its best. Black or white brush color will be choosen at random.
available
The dry cleaner made of soft metal fibers is the best invention for cleaning the iron tip. It cleans effectively without causing thermal shock. Unlike water-based sponges, it doesn’t lower the tip temperature.More infos on how and why to use this cleaning tool you can find in our Synth DIY Guides.
available
The Exploding Shed Workbench Mat provides a reliable, well-organised surface for assembling Eurorack DIY kits, repairing electronics and carrying out soldering work.Its antistatic design helps protect sensitive electronic components from electrostatic discharge. The included adjustable wrist strap, coiled grounding cables and earth bonding plug connect the user and mat to a suitable grounding point, creating a more controlled, ESD-safe workspace when correctly installed.Multiple integrated compartments keep screws, tools and small components organized and within easy reach. The three upper compartments are magnetic, helping prevent metal screws, nuts and other small parts from moving around or becoming lost while you work.A built-in ruler marked in both millimetres and inches makes it easy to take quick measurements directly at the workbench. The spacious central work area provides plenty of room for PCBs, Eurorack modules and other electronic assemblies.The removable ESD mat insert can also be taken out and used separately, providing a flexible antistatic work surface wherever it is needed.Made from durable, heat-resistant material, the mat is suitable for soldering and helps protect the workbench from heat, scratches and everyday wear. Its non-slip surface remains stable during detailed assembly and repair work and is easy to clean after use.Features• Designed for assembling Eurorack DIY kits• ESD-safe, antistatic work surface• Removable ESD mat for separate use• Adjustable grounding wrist strap• Coiled grounding cables and earth bonding plug• Heat-resistant and suitable for soldering• Magnetic compartments for screws and other metal parts• Multiple storage areas for tools and small components• Integrated ruler with millimetre and inch markings• Spacious central area for PCBs and Eurorack modules• Durable, non-slip and easy to cleanIncludes• Exploding Shed Workbench Mat• Removable ESD mat insert• Adjustable ESD wrist strap• Coiled grounding cables• Earth bonding plug
available
If you are a musician and play live, at one point you need Gaffa tape. We've been on tour for years and have seen it all. Greasy adhesive residues on cables and equipment and all that uglyness.Here is the real one!• Professional Quality• 50m lenth, 50mm width• Matte black, doesn't reflect on stage• Leaves no residues even after a couple of days or when it gets warm• Very stable
available
If you experience a hum on devices which are USB powered it might be that you have a ground-loop interference on the audio line. These isolators can be placed inbetween to solve it. Comes with small 3.5mm cable.
available
Bit insert 1/4" Torx (TX25) from high grade tool-steel, length 50mm. These fit for our self-carving M5 screws with TX drive.
available
Bit insert 1/4" Torx (TX25) from high grade tool-steel, length 25mm. These fit for our self-carving M5 screws with TX drive.
sold out at the moment
The IC Extractor is an essential tool for safely removing integrated circuits (ICs) from sockets without risk of damage. Designed for DIP chips and other socketed components, it helps prevent bent pins and static damage, ensuring a secure and efficient extraction process.
available
Professional labelling tape. Super for labelling mixing desks, hard disks or any kind of equipment.• Professional Quality• 33m length, 19mm width• Matte white• Leaves no residues
available
These mini side cutters with a stripping function are perfect for synth DIY projects. They automatically adjust to wire sizes from 0.4 to 1.6 mm (26–14 AWG), allowing for precise cutting and stripping.Available in blue and red – the color is chosen at random.More infos on how to use this cleaning tool you can find in our Synth DIY Guides.
available
The PM-396F is a high-precision stainless steel cutting plier, ideal for electronics work. Made from high-quality AISI 420 stainless steel, it ensures durability and corrosion resistance. Its ultra-sharp cutting edges allow precise cuts on soft wires ranging from 0.3mm to 1.3mm in diameter. The ergonomic dual-color anti-slip TPR handles provide comfort and control, while the Polyoxymethylene (POM) spring ensures smooth operation for fatigue-free use.More infos on how to use this cleaning tool you can find in our Synth DIY Guides.
available
The PM-396G is a precision needle-nose plier designed for delicate bending, gripping, and fine assembly tasks in electronics applications. Made from high-grade stainless steel, it resists rust and wear, ensuring long-lasting performance. The precision-machined jaws provide a secure grip without damaging components, while the POM spring mechanism allows effortless handling. Ergonomic TPR handles offer a comfortable and slip-resistant grip for detailed work.
available
The PM-396H is a precision flat-nose plier designed for delicate bending, gripping, and fine assembly tasks in electronics applications. Made from high-grade stainless steel, it resists rust and wear, ensuring long-lasting performance. The precision-machined jaws provide a secure grip without damaging components, while the POM spring mechanism allows effortless handling. Ergonomic TPR handles offer a comfortable and slip-resistant grip for detailed work.
available
The PM-396I bent-nose plier is the perfect tool for shaping, looping, and bending wire in electronic projects. Made from durable stainless steel, it delivers precise control for intricate wirework. The rounded jaws ensure smooth curves without sharp bends or marks. Its integrated POM spring and anti-slip TPR handles provide comfort and ease of use, making it an essential addition to any electronics toolkit.