Joranalogue - Test 3

Product information "Joranalogue - Test 3"
Test 3 is a purpose-designed tool for measuring voltages and currents in your Eurorack system. This means that just a single circuit board or module can now replace a convoluted test setup with multiple multimeters, custom cables etc.

Two push buttons allow you to cycle the value shown on the LED display between three measurements (voltage, current and stored peak current) of the three power rails. The peak currents continually update in the background on all rails, making it ideal for quickly getting maximum current figures.

Apart from measuring the current draw of a single module, Test 3 also supports testing power supplies and cables, measuring an entire system (up to 1 A of current on each rail), troubleshooting DIY modules, powering a skiff or breadboard from a larger system...

Note: Test 3 is available as a (very easy) do-it-yourself project, requiring some soldering and basic tools. It can be built either as a standalone circuit board with the DIY Kit, or as a Eurorack module with both the DIY Kit and Front Panel Kit. Most dealers bundle both kits together. With just 11 components to solder, this is a perfect synth DIY beginner project!

Features:
• Measures up to 20 V and 1 A on each Eurorack power rail, including +5 V.
• 20 mV resolution voltage measurement, 1 mA resolution current measurement.
• Peak current values of all rails are continually updated.
• Pre-soldered SMD parts: perfect DIY project for beginners.
• Precision-milled 2 mm anodised aluminium front panel with high-resolution, non-erasable graphics (module version).
• Bullet-proof design: polarised power headers and MOSFET protection circuit.
• Includes 16-to-16-pin Eurorack power ribbon cable.
• Premium mounting hardware: black screws, black plastic washers and matching hex key (module version).
• High-quality components and assembly; designed and made in Belgium.

DIY-Kit-Type:
THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
Current draw +12 V [mA]: 35
DIY Level: Easy
Depth [mm]: 28
Width [HP]: 8
Format: 3U
Panel / Color: Silver Alu
Manufacturer / Hersteller:
Joranalogue bv
Heistraat 43
9190 Stekene
Belgium
support@joranalogue.com


Product Safety Information

Eurorack DIY Kits

Important Notice & Intended Use
Please read this safety guide before installation or use. This kit is intended for adult users experienced in electronics and modular synthesis. Assembly, including soldering, is required. Proper testing and installation are essential to ensure safe and functional operation. The completed module is intended for installation in a Eurorack-compatible synthesizer system powered by ±12V and +5V.

General Warnings

1. Electrical Hazards:
• Ensure the power supply matches the module’s specified voltage and current ratings (refer to the product manual). Incorrect voltage can damage the module and pose a safety risk.
• Never connect or disconnect the module while the Eurorack system is powered on.
• Wrong polarity can damage your module or system. Make sure the module is connected with correct polarity.

2. Heat Generation:
• The module may generate heat during operation. Ensure proper ventilation within your Eurorack case to prevent overheating.

3. Sharp Edges:
• The module’s faceplate and components may have sharp edges. Handle with care to avoid cuts or scratches.

4. Small Parts:
• Contains small parts that could cause a choking hazard. Keep away from children and pets.

5. Compatibility:
• This module is designed specifically for Eurorack-compatible systems. Connecting it to non-compatible systems may result in damage or malfunction.

Assembly Requirements
• Soldering skills are required to complete the module.
• Ensure a clean, well-lit and ventilated workspace free of flammable materials during assembly.
• Use appropriate tools and safety equipment, such as eye protection.

Testing
• Test the module thoroughly for shorts or incorrect assembly before powering it in your Eurorack system. When the unit has malfunctions due to incorrect assembly, the entire Eurorack system might be damaged. It's a good idea to test it in a separate case with only that single module.
• Use a multimeter or other appropriate tools to confirm proper functionality.

Installation and Use
• Mount securely in a Eurorack case using the provided screws.
• Use only the included or manufacturer-recommended power cable.
• Connect only when the power is off.
• Follow the module's user guide for instructions on operation. Do not exceed the input/output limits specified.

Responsibility
Users are solely responsible for proper assembly and testing. Contact manufacturer support for assistance if needed.

Environmental Safety
• Dispose of the module, its components, and packaging in accordance with local electronic waste regulations.

Liability Disclaimer
• The manufacturer or distributor is not responsible for any injury, damage, or malfunction resulting from improper installation, use, or modification of this product.

Contact Information
For further assistance, contact the manufacturer (you'll find the info under each product in our shop) or our shop support team at:

Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Nonnenstrasse 19, 04229 Leipzig, Germany
support@exploding-shed.com
Manufacturer "Joranalogue"
Driven by an unrelenting passion for analogue circuits, Joranalogue Audio Design offers a novel series of high-quality Eurorack music synthesiser modules. The utilitarian aesthetic envelops designs providing immense depth, versatility and precision. We're continually introducing new approaches and techniques to the Eurorack platform, making waves in the stagnant waters of analogue synthesis. All of our modules are designed and made in Belgium, guided by experiences in both modern hardware engineering and vintage synthesiser servicing.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.