Eurorack Rails - Low Profile - Type A (black) - 84 HP
Product information "Eurorack Rails - Low Profile - Type A (black) - 84 HP"
Rail (one piece, threaded strip not included) for building DIY Eurorack cases.
84 HP = 427mm
104 HP = 529mm
114 HP = 579mm
126 HP = 640mm
168 HP = 854mm
196 HP = 996mm
Type A rails feature a lid, which holds your modules in place so they cannot move up and down.
For building your case you also might need some additionals: threaded strips and M3 screws holding your modules and M5 screws for mounting the rails (we have various types of screws here). As an alternative to the M3 threaded strips you can also use M3 slide nuts.
The hole where the M5 screw sits later has no threading - an M5 screw will carve its way when you insert them. Alternatively you could use a tapping tool, but it's not really necessary.
| Color: | Black |
|---|---|
| Length [HP]: | 84 |
| Profile: | Low-Profile |
| Type: | A |
Login
Manufacturer / Hersteller:
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Nonnenstrasse 19
04229 Leipzig, Germany
support@exploding-shed.com
WEEE-Nr.: DE94097895
Product Safety Information
Please read this safety guide before installation or use.
Intended Use
• Eurorack rails are designed as mechanical mounting structures for Eurorack modules in synthesizer cases.
• Screws and sliding nuts are intended solely for fastening modules to the rails.
• Use outside this scope may result in mechanical failure, damage, or safety risks.
Installation and Use
• Use appropriate tools (e.g., screwdrivers) and avoid overtightening screws to prevent damage to rails, nuts, or modules.
• Wear suitable protective gloves to avoid cuts from sharp aluminum edges.
• Work in a well-lit and ventilated environment.
• Ensure rails are securely mounted within the case to prevent instability.
• Only use screws, nuts, and washers of matching size and thread. Mixing incompatible parts may compromise stability or safety.
Warnings
• Sharp edges on rails may cause cuts. Handle carefully.
• Screws, nuts, and washers are small parts and pose a choking hazard. Keep out of reach of children and pets.
• Improper mounting may result in unstable modules, damage to equipment, or risk of injury.
• Do not use rails in corrosive or high-stress environments where material failure may occur.
• Keep rails and mounting hardware out of reach of children.
Storage and Cleaning
• Store rails and accessories in a dry, cool place, avoiding strong temperature fluctuations.
• Clean rails with a dry cloth only. Do not use aggressive cleaning agents, as they may damage the surface finish.
Contact Information
For further information or support, contact:
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Nonnenstrasse 19, 04229 Leipzig, Germany
support@exploding-shed.com
