Robaux - SWT16+
Product information "Robaux - SWT16+"
The Robaux SWT16+ is a 16-track eurorack trigger sequencer with up to 64 steps per track.
The Sweet Sixteen Plus is perfect for triggering drums, envelopes or modulation sources.
With the new member of the Robaux family, you can switch between eight different patterns.
This will allow you to create even more exciting performances. You can store these patterns in up to 16 memory banks.
Program your tracks step by step. Play your tracks on the fly. Or just use the new Euclidean rhythm generator.
The new design has even more crazy flashing buttons! With the improved menu navigation, you can use the sequencer even more intuitive.
The sequencer offers 16 different modes to create and modify rhythms. Modes are divided into four distinct areas:
Create, Perform, Track Settings and Sequencer Settings.
Randomize your tracks, move your steps or reverse your patterns. With these tools, you can discover entirely new rhythms.
And the new Coin function adds even more variety to your beats.
Features:
• Number of Tracks: 16
• Number of Steps per Track: up to 64
• Number of Presets: 16
• Number of Patterns per Preset: up to 8
• 1 x Clock In
• 1 x Reset In
• 16 x Trigger Out
• 1 x MIDI Out (Alternative firmware and adapter required)
• 28 x backlight silicon button pads
DIY-Kit-Type:
THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
The Sweet Sixteen Plus is perfect for triggering drums, envelopes or modulation sources.
With the new member of the Robaux family, you can switch between eight different patterns.
This will allow you to create even more exciting performances. You can store these patterns in up to 16 memory banks.
Program your tracks step by step. Play your tracks on the fly. Or just use the new Euclidean rhythm generator.
The new design has even more crazy flashing buttons! With the improved menu navigation, you can use the sequencer even more intuitive.
The sequencer offers 16 different modes to create and modify rhythms. Modes are divided into four distinct areas:
Create, Perform, Track Settings and Sequencer Settings.
Randomize your tracks, move your steps or reverse your patterns. With these tools, you can discover entirely new rhythms.
And the new Coin function adds even more variety to your beats.
Features:
• Number of Tracks: 16
• Number of Steps per Track: up to 64
• Number of Presets: 16
• Number of Patterns per Preset: up to 8
• 1 x Clock In
• 1 x Reset In
• 16 x Trigger Out
• 1 x MIDI Out (Alternative firmware and adapter required)
• 28 x backlight silicon button pads
DIY-Kit-Type:
THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
| Current draw +12 V [mA]: | 60 |
|---|---|
| DIY Level: | Medium |
| Depth [mm]: | 30 |
| Width [HP]: | 20 |
| Format: | 3U |
| Panel / Color: | Black Alu |
Manufacturer / Hersteller:
Robaux
R. Menzel
Bellealliancestraße 45
20259 Hamburg
Germany
support@robaux.io
Product Safety Information
Eurorack DIY Kits
Important Notice & Intended Use
Please read this safety guide before installation or use. This kit is intended for adult users experienced in electronics and modular synthesis. Assembly, including soldering, is required. Proper testing and installation are essential to ensure safe and functional operation. The completed module is intended for installation in a Eurorack-compatible synthesizer system powered by ±12V and +5V.
General Warnings
1. Electrical Hazards:
• Ensure the power supply matches the module’s specified voltage and current ratings (refer to the product manual). Incorrect voltage can damage the module and pose a safety risk.
• Never connect or disconnect the module while the Eurorack system is powered on.
• Wrong polarity can damage your module or system. Make sure the module is connected with correct polarity.
2. Heat Generation:
• The module may generate heat during operation. Ensure proper ventilation within your Eurorack case to prevent overheating.
3. Sharp Edges:
• The module’s faceplate and components may have sharp edges. Handle with care to avoid cuts or scratches.
4. Small Parts:
• Contains small parts that could cause a choking hazard. Keep away from children and pets.
5. Compatibility:
• This module is designed specifically for Eurorack-compatible systems. Connecting it to non-compatible systems may result in damage or malfunction.
Assembly Requirements
• Soldering skills are required to complete the module.
• Ensure a clean, well-lit and ventilated workspace free of flammable materials during assembly.
• Use appropriate tools and safety equipment, such as eye protection.
Testing
• Test the module thoroughly for shorts or incorrect assembly before powering it in your Eurorack system. When the unit has malfunctions due to incorrect assembly, the entire Eurorack system might be damaged. It's a good idea to test it in a separate case with only that single module.
• Use a multimeter or other appropriate tools to confirm proper functionality.
Installation and Use
• Mount securely in a Eurorack case using the provided screws.
• Use only the included or manufacturer-recommended power cable.
• Connect only when the power is off.
• Follow the module's user guide for instructions on operation. Do not exceed the input/output limits specified.
Responsibility
Users are solely responsible for proper assembly and testing. Contact manufacturer support for assistance if needed.
Environmental Safety
• Dispose of the module, its components, and packaging in accordance with local electronic waste regulations.
Liability Disclaimer
• The manufacturer or distributor is not responsible for any injury, damage, or malfunction resulting from improper installation, use, or modification of this product.
Contact Information
For further assistance, contact the manufacturer (you'll find the info under each product in our shop) or our shop support team at:
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Nonnenstrasse 19, 04229 Leipzig, Germany
support@exploding-shed.com
Robaux
R. Menzel
Bellealliancestraße 45
20259 Hamburg
Germany
support@robaux.io
Product Safety Information
Eurorack DIY Kits
Important Notice & Intended Use
Please read this safety guide before installation or use. This kit is intended for adult users experienced in electronics and modular synthesis. Assembly, including soldering, is required. Proper testing and installation are essential to ensure safe and functional operation. The completed module is intended for installation in a Eurorack-compatible synthesizer system powered by ±12V and +5V.
General Warnings
1. Electrical Hazards:
• Ensure the power supply matches the module’s specified voltage and current ratings (refer to the product manual). Incorrect voltage can damage the module and pose a safety risk.
• Never connect or disconnect the module while the Eurorack system is powered on.
• Wrong polarity can damage your module or system. Make sure the module is connected with correct polarity.
2. Heat Generation:
• The module may generate heat during operation. Ensure proper ventilation within your Eurorack case to prevent overheating.
3. Sharp Edges:
• The module’s faceplate and components may have sharp edges. Handle with care to avoid cuts or scratches.
4. Small Parts:
• Contains small parts that could cause a choking hazard. Keep away from children and pets.
5. Compatibility:
• This module is designed specifically for Eurorack-compatible systems. Connecting it to non-compatible systems may result in damage or malfunction.
Assembly Requirements
• Soldering skills are required to complete the module.
• Ensure a clean, well-lit and ventilated workspace free of flammable materials during assembly.
• Use appropriate tools and safety equipment, such as eye protection.
Testing
• Test the module thoroughly for shorts or incorrect assembly before powering it in your Eurorack system. When the unit has malfunctions due to incorrect assembly, the entire Eurorack system might be damaged. It's a good idea to test it in a separate case with only that single module.
• Use a multimeter or other appropriate tools to confirm proper functionality.
Installation and Use
• Mount securely in a Eurorack case using the provided screws.
• Use only the included or manufacturer-recommended power cable.
• Connect only when the power is off.
• Follow the module's user guide for instructions on operation. Do not exceed the input/output limits specified.
Responsibility
Users are solely responsible for proper assembly and testing. Contact manufacturer support for assistance if needed.
Environmental Safety
• Dispose of the module, its components, and packaging in accordance with local electronic waste regulations.
Liability Disclaimer
• The manufacturer or distributor is not responsible for any injury, damage, or malfunction resulting from improper installation, use, or modification of this product.
Contact Information
For further assistance, contact the manufacturer (you'll find the info under each product in our shop) or our shop support team at:
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Nonnenstrasse 19, 04229 Leipzig, Germany
support@exploding-shed.com
Manufacturer "Robaux"
Robot auxiliaire creates performance tools for Eurorack Modular Systems. Robaux modules do not produce a single sound but are essential modular synthesizer control tools to create wonderful music. All modules are available as DIY kits or assembled. Learn more about these modules on this website. Robaux is designed, engineered and assembled in Hamburg, Germany.
Login
Info & Downloads
Git Hub
Video 1
Video 2
Instagram
Build Guide
User Manual
Modular Grid
Manufacturer Website