Zlosynth - Achordion
€237.00
available, delivery time 2-5 days
Product information "Zlosynth - Achordion"
Four playing styles – single tone, chords, arpeggios and intervals – make harmony immediately playable. Notes are quantized to a selectable scale, so the module can handle the underlying music theory while remaining intuitive for live performance and experimentation.
Two independent 1V/oct inputs create separate melodic lines, and two audio outputs can either carry those lines independently or mix them when only one output is patched. Dedicated controls and CV inputs for wavetable, tone, detune and chord selection, together with an eight-LED display, keep complex voicings easy to navigate.
Features
• Quantizing wavetable oscillator and chord generator
• 37 smoothly transitioning wavetables in four banks
• Up to 18 simultaneous voices
• Sub-octaves, duplicated tones and chords
• 4 modes: single tone, chords, arpeggios, intervals
• Quantization to a selectable scale
• Dual 1V/oct inputs and dual audio outputs
• 8 LEDs visualize parameters and settings
• Open-source Rust firmware on Daisy Patch SM
• 10 HP, skiff-friendly Eurorack module
DIY-Kit-Type:
SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
| Current draw +12 V [mA]: | 85 |
|---|---|
| Current draw -12 V [mA]: | 7 |
| DIY Level: | Easy/Medium |
| Depth [mm]: | 28 |
| Width [HP]: | 10 |
| Format: | 3U |
| Panel / Color: | Black Alu |
Login
Petr Horacek
nam. SNP 26
613 00 Brno
Czech Republic
petr@zlosynth.com
Product Safety Information
Please read this safety guide before installation or use.
Important Notice & Intended Use
• This kit is intended for adult users experienced in electronics and modular synthesis.
• Assembly, including soldering, is required.
• Proper testing and installation are essential to ensure safe and functional operation.
• The completed module is intended for installation in a Eurorack-compatible synthesizer system powered by ±12V and +5V.
• Use outside this scope may result in malfunction, damage, or safety risks.
General Warnings
Electrical Hazards:
• Ensure the power supply matches the module’s specified voltage and current ratings (refer to the product manual). Incorrect voltage can damage the module and pose a safety risk.
• Never connect or disconnect the module while the Eurorack system is powered on.
• Wrong polarity can damage your module or system. Make sure the module is connected with correct polarity.
Heat Generation:
• The module may generate heat during operation. Ensure proper ventilation within your Eurorack case to prevent overheating.
Sharp Edges:
• The module’s faceplate and components may have sharp edges. Handle with care to avoid cuts or scratches.
Small Parts:
• Contains small parts that could cause a choking hazard. Keep away from children and pets.
Compatibility:
• This module is designed specifically for Eurorack-compatible systems. Connecting it to non-compatible systems may result in damage or malfunction.
Assembly Requirements
• Soldering skills are required to complete the module.
• Ensure a clean, well-lit and ventilated workspace free of flammable materials during assembly.
• Use appropriate tools and safety equipment, such as eye protection.
Testing
• Test the module thoroughly for shorts or incorrect assembly before powering it in your Eurorack system. When the unit has malfunctions due to incorrect assembly, the entire Eurorack system might be damaged. It's a good idea to test it in a separate case with only that single module.
• Use a multimeter or other appropriate tools to confirm proper functionality.
Installation and Use
• Mount securely in a Eurorack case using the provided screws.
• Use only the included or manufacturer-recommended power cable.
• Connect only when the power is off.
• Follow the module's user guide for instructions on operation. Do not exceed the input/output limits specified.
Responsibility
Users are solely responsible for proper assembly and testing. Contact manufacturer support for assistance if needed.
Environmental Safety
• Dispose of the module, its components, and packaging in accordance with local electronic waste regulations.
Liability Disclaimer
• The manufacturer or distributor is not responsible for any injury, damage, or malfunction resulting from improper installation, use, or modification of this product.
Contact Information
For further assistance, contact the manufacturer or our shop support team at:
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Selneckerstr. 26, 04277 Leipzig, Germany
support@exploding-shed.com