Erica Synths - EDU DIY Kick Drum Konstrukt-8 Panel
€6.00
available, delivery time 2-5 days
Product information "Erica Synths - EDU DIY Kick Drum Konstrukt-8 Panel"
Replacement front panel with updated graphics for the Erica Synths EDU DIY Kick Drum. This is the Kick drum variant of the new-design EDU DIY System Panels. It gives an existing Kick Drum module a consistent appearance alongside the KONSTRUKT-8 EDU DIY Drum System.
Features
• Kick drum panel variant
• Updated graphics for the EDU DIY Kick Drum
• Matches the visual design of KONSTRUKT-8
• 10 HP width; 3U Eurorack format
• Front panel only; electronics are not included
| Depth [mm]: | 25 |
|---|---|
| Width [HP]: | 10 |
| Format: | 3U |
| Panel / Color: | Black FR4 |
Login
Erica Synths, SIA
Tīklu Str. 3
LV-1048 Riga
Latvia
support@ericasynths.lv
Product Safety Information
Please read this safety guide before assembly or use.
Important Notice & Intended Use
• This kit contains only a front panel and printed circuit board (PCB).
• All additional electronic components, hardware, and cables must be sourced separately by the user.
• The kit is intended for adult users experienced in electronics and modular synthesis.
• Assembly, including soldering, is required. Proper testing and installation are essential to ensure safe and functional operation.
• The completed module is intended for installation in a Eurorack-compatible synthesizer system powered by ±12V and +5V.
• Use outside this scope may result in malfunction, damage, or safety risks.
General Warnings
Electrical Hazards:
• Ensure the power supply matches the module’s specified voltage and current ratings (refer to the documentation). Incorrect voltage can damage the module and pose a safety risk.
• Never connect or disconnect the module while the Eurorack system is powered on.
• Wrong polarity can damage the module and the entire system. Verify correct orientation before powering.
Heat Generation:
• Completed modules may generate heat during operation. Ensure proper ventilation within your Eurorack case.
Sharp Edges:
• The panel and PCB may have sharp edges. Handle carefully to avoid injury.
Small Parts:
• Solder joints, headers, and hardware are small parts and may pose a choking hazard. Keep away from children and pets.
Compatibility:
• The design is intended only for Eurorack systems. Use with non-compatible formats may result in malfunction or damage.
Assembly Requirements
• Users must provide their own electronic components according to the bill of materials (BOM).
• Soldering skills are required to complete the module.
• Ensure a clean, well-lit and ventilated workspace free of flammable materials during assembly.
• Use appropriate tools and personal protective equipment, such as eye protection.
Testing
• Test the module thoroughly for shorts or incorrect assembly before powering it in your Eurorack system. When the unit has malfunctions due to incorrect assembly, the entire Eurorack system might be damaged. It's a good idea to test it in a separate case with only that single module.
• Use a multimeter or other appropriate tools to confirm proper functionality.
Installation and Use
• Mount securely in a Eurorack case using suitable screws.
• Use only a manufacturer-recommended power cable.
• Connect only when the system power is off.
• Follow module-specific documentation for correct operation. Do not exceed input/output specifications.
Responsibility
• Users are solely responsible for sourcing correct components, proper assembly, and testing.
• The manufacturer or distributor cannot guarantee performance if non-recommended components are used.
• Contact support for questions before assembly if needed.
Environmental Safety
• Dispose of PCBs, components, and packaging in accordance with local electronic waste regulations.
Liability Disclaimer
• The manufacturer or distributor is not responsible for injury, damage, or malfunction resulting from incorrect assembly, sourcing of unsuitable components, or improper installation and use.
Contact Information
For further assistance, contact the manufacturer or our shop support team at:
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Selneckerstr. 26, 04277 Leipzig, Germany
support@exploding-shed.com
Cross Selling
Ähnlich
available
There’s nothing quite like the sound of old-school analog drum machines. Especially classic kicks like Roland’s 808 and 909 are ubiquitous in electronic music. Unfortunately, their circuitry is notoriously complex and difficult to understand. Enter the mki x es.edu DIY Kick Drum kit, which not only aims to shed some light on the fundamental circuit design principles behind those circuits - but also captures their unmistakable sound as a fully-fledged Eurorack module.We - Erica Synths and Moritz Klein - have developed a series of educational DIY kits under the brand name mki x es.EDU with one specific goal in mind: to teach people with little-to-no prior experience how to design analog synthesizer circuits from scratch. What you’ll find in the box is not simply meant to be soldered together and then disappear in your rack. Instead, we want to take you through the circuit design process step by step, explaining every choice we’ve made and how it impacts the finished module.NB! All kits in these series are simple and come with extensive user manuals which can be downloaded separately, therefore we will not provide customer support in case your DIY build fails to function or similar.Features:• Manual and CV controlled Pitch• Accent input• Manual decay control• Manual pitch envelope with adjustable depth and decay time• Tone control• Distortion controlDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
The product is a front panel only.Replacement front panel with updated graphics for the Erica Synths EDU DIY Snare Drum. This is the Snare drum variant of the new-design EDU DIY System Panels. It gives an existing Snare Drum module a consistent appearance alongside the KONSTRUKT-8 EDU DIY Drum System.Features• Snare drum panel variant• Updated graphics for the EDU DIY Snare Drum• Matches the visual design of KONSTRUKT-8• 10 HP width; 3U Eurorack format• Front panel only; electronics are not included
available
The product is a front panel only.Replacement front panel with updated graphics for the Erica Synths EDU DIY Compressor. This is the Compressor variant of the new-design EDU DIY System Panels. It gives an existing Compressor module a consistent appearance alongside the KONSTRUKT-8 EDU DIY Drum System.Features• Compressor panel variant• Updated graphics for the EDU DIY Compressor• Matches the visual design of KONSTRUKT-8• 10 HP width; 3U Eurorack format• Front panel only; electronics are not included
available
The product is a front panel only.Replacement front panel with updated graphics for the Erica Synths EDU DIY Hi Hat. This is the Hi Hat variant of the new-design EDU DIY System Panels. It gives an existing Hi Hat module a consistent appearance alongside the KONSTRUKT-8 EDU DIY Drum System.Features• Hi Hat panel variant• Updated graphics for the EDU DIY Hi Hat• Matches the visual design of KONSTRUKT-8• 10 HP width; 3U Eurorack format• Front panel only; electronics are not included