New Products
sold out at the moment
DYN is a stereo transient and dynamics processor based on the DSP algorithms of Surreal Machines Crack. Attack and Sustain shape transients, with Gate, Maximizer, Limiter and output Clipper stages for further control. An assignable CV input can modulate one of seven parameters.Features• Stereo transient and dynamics processing• Attack and Sustain controls plus five faders• Gate, Maximizer, Limiter and output Clipper• Assignable 0-5 V CV control of seven parameters• 24-bit converters; 48 kHz DSP processing; approximately 1 ms latencyDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
only 2 left
Filler adds drum fills and variations to an existing trigger pattern. Six trigger inputs and seven trigger outputs, including an additional cymbal output, combine with 333 fills across 41 banks. Six fill modes and eight drummer modes provide different ways to introduce variation.Features:• Six trigger inputs and seven trigger outputs, including cymbal• 333 fills arranged in 41 banks• Six fill modes and eight drummer modes• Clock input: one pulse per sixteenth note• 0-5 V CV input and 0-6.5 V fill-envelope output• OLED display, encoder, four buttons and two knobsDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
available
3350 VCF uses the AS3350/CEM3350 architecture to provide two two-pole state-variable filters. Each filter offers low-pass or high-pass operation. The filters can run independently, in parallel or stereo, or in series for four-pole filtering. A shared Frequency control and a Separation control move the two cutoff frequencies together or apart.Features:• Two two-pole AS3350/CEM3350 state-variable filters• Low-pass/high-pass selection per filter• Independent, parallel/stereo or serial four-pole operation• Shared Frequency and opposing Separation controls• Resonance up to self-oscillation• A output from filter A; AB output from filter B/final stageDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
only 2 left
Verb is a compact stereo reverb with eight distinct reverb topologies. Send, feedback and tone controls shape the space, while a CV input adds modulation to the Send setting. The left input is normalled to the right input for mono sources.Features:• Eight selectable reverb topologies• Stereo input and output; left input normalled to right• CV control of Send, with +/-5 V input added to the knob setting• 24-bit DSP processing at 48 kHz• Five controls, two buttons and eight indication LEDsDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
available
This notepad is handmade exclusively for us at the iconic papp-o-mania bookbinding workshop in Leipzig-Connewitz, Germany.We love the classic, timeless look of these notepads and the special quality of traditional bookbinding. Through numerous manual steps, paper and cardboard are carefully crafted into a little piece of craftsmanship "Made in Leipzig". The pages are perforated, allowing them to be neatly and easily torn off when needed. As a finishing touch, each notepad is embossed by hand with our logo and signet using a traditional stamping technique.Created to celebrate 10 years of Exploding Shed in October 2026, these notepads were produced in a one-off limited edition especially for the occasion.A lovely little piece of Leipzig craftsmanship – for writing, sketching, capturing ideas or simply falling in love with.
available
Sigma is a four-channel gate processor for creating variations on clocks, triggers and rhythmic patterns. Each channel adjusts gate length manually or by CV, from 1 ms to 10 seconds, with an additional mode for indefinitely sustained gates.Four main outputs and four inverted outputs feed a wider rhythm-processing system with 15 additional logic outputs. AND, NAND, OR, NOR and XOR operations act on the length-processed signals, so changing gate duration also changes the resulting patterns. A digital length-processing core and analog logic circuits generate up to 23 simultaneous gate signals from four inputs.Features:• Four gate-length processors with manual and CV control• 1 ms to 10 s gate length plus infinite mode• Four main outputs and four NOT outputs• 15 logic outputs: AND, NAND, OR, NOR and XOR• Logic processing follows gate-length adjustment• Input impedance: 100 kΩ; output impedance: 1 kΩ• Length CV range and output level: 5 Vp-p• Depth: 30 mm including power cableDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
available
Mix Tour is a compact four-channel stereo mixer with volume controls and a stereo output. It brings several stereo signals together in a straightforward Eurorack mixing stage.Features:• Four stereo channels• Volume controls• Stereo outputDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
Goldfinger is a passive desktop matrix mixer played by touching its gold surface. Six bidirectional sockets let you choose how many signals to mix or distribute: use five inputs and one output for mono mixing, four inputs and two outputs for stereo, or one input and five outputs to distribute a signal.Your skin provides the resistance between contacts, so finger position, pressure and movement change the connections. Audio and pulse signals work well; control voltages can also pass through the surface, but less readily. Signal bleed, noise and possible distortion are part of its experimental character. Goldfinger arrives assembled and requires no soldering or power supply.Features• Passive touch-controlled matrix mixer• Six bidirectional sockets• Flexible mono, stereo and signal-distribution patching• Real gold contact surface• Responds to finger position and touch• Desktop format; no Eurorack rack space required• Pre-assembled; no power supply required
available
XYZ is a compact chaos generator based on JerkChaos. A single input and three outputs labelled X, Y and Z provide a straightforward interface for exploring chaotic modulation in Eurorack patches.Features:• JerkChaos-based chaos generator• One input• X, Y and Z outputsDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
LFO Bi is a dual low-frequency oscillator with skew and pulse-width controls, restart inputs, and triangle and square outputs. Its two ranges cover slow modulation and faster cycles extending into the audio range. The low range runs from one cycle per minute to one cycle per second; the high range runs from a 1.2-second period up to 40 Hz.Features:• Two LFO channels• Triangle and square outputs• Skew and pulse-width controls• Restart inputs• Low range: 60-second to 1-second period• High range: 1.2-second period to 40 HzDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
VCO 3340 is a 3340-based voltage-controlled oscillator with sine, triangle, sawtooth and square outputs. Pulse-width modulation, hard and soft sync, FM and a volt-per-octave input support a range of oscillator patches. The design focuses on stable operation and straightforward assembly and calibration. Available as a full DIY kit or as an assembled module.Features:• 3340-based VCO• Sine, triangle, sawtooth and square outputs• Pulse-width modulation• Hard and soft sync• FM input• 1 V/octave inputDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
Slooper is a versatile modulation source. At its core is a slew limiter, which can also be used as an envelope, LFO or crude VCF.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
Over Feed combines four overdrive channels inspired by DIY guitar effects. Each channel has its own input and output, and a summed output combines all four channels. Use the channels separately for saturation or connect them in feedback patches for more extreme processing.Features:• Four overdrive channels• Independent input and output per channel• Summed output of all four channels• Suitable for saturation and feedback patchesDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
One VCF is a CEM3320-based low-pass filter with a 24 dB-per-octave slope. Its compact design provides a straightforward filtering stage for Eurorack patches. The manufacturer describes the design as simple to build.Features:• Low-pass filter• 24 dB/octave slope• CEM3320-based circuitDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
MINI VCA packs four voltage-controlled amplifiers into a compact Eurorack module. Based on the 3360 VCA circuit, it provides separate outputs for the four channels, allowing signals to be controlled and routed individually.Features:• Four VCA channels• 3360-based circuit• Individual channel outputsDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
only 2 left
Ocelot combines an electroacoustic interface with a compact monitoring station for portable Eurorack systems. Mix two mono signals and a stereo auxiliary source, then listen through the built-in speaker, headphones or balanced stereo outputs. Separate controls set the master, headphone and speaker levels.A built-in contact piezo feeds the mono inputs when no cables are connected and also has a dedicated output. Use it to capture physical interaction with the module, or explore electroacoustic feedback between the piezo and the internal speaker. A direct input overrides the speaker feed, while a rear header provides integration with Jolin Singoli.Features:• Four-input mixer: two mono inputs with level controls and one stereo auxiliary input• Built-in speaker with separate volume control and direct override input (C)• Contact piezo normalized to mono inputs, with dedicated output (O)• Balanced left and right outputs with master volume control• Headphone driver with independent volume control (P)• Electroacoustic feedback between speaker and piezo• Rear connection header for Singoli• Reverse power protectionDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
available
Anti Logic combines two gate signals using AND, OR and exclusive OR logic, with inverted versions of all three functions. Use the six logic operations to derive new gate patterns from existing signals in your Eurorack patch.Features:• AND, OR and XOR logic• Inverted NAND, NOR and XNOR functions• Two-input logical operationsDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
only 2 left
Clock Divider provides an internal clock, a reset function and clock divisions from 2 to 512. Use it to derive slower timing signals and coordinate different parts of a rhythmic Eurorack patch.Features:• Internal clock• Clock divisions from 2 to 512• Reset functionDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
Dual FM OSC combines two oscillators with square and triangle waveforms, frequency modulation inputs and a summed mix output. It provides a compact starting point for FM experiments and layered oscillator patches.Features:• Two oscillators• Square and triangle waveforms• FM inputs• Summed mix outputDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
VOLT55 + Shield combines a compact USB-C-powered Eurorack power supply with a filtered distribution busboard. Available as VOLT55 S, M or L, the system provides isolated power rails for studio, stage and portable setups using a compatible USB-C PD adapter or power bank. The Shield offers 28 module connectors in separate analog and digital zones to reduce interference, and additional Shields can be daisy-chained. Three front-panel USB-A ports supply external devices and share the +5V rail with your modules.Choose the capacity that suits your system:VOLT55 S: +12V 2500mA / -12V 1250mA / +5V 2000mA.VOLT55 M: +12V 4000mA / -12V 2500mA / +5V 2000mA.VOLT55 L: +12V 5000mA / -12V 2500mA / +5V 2000mA.S requires a USB-C PD source rated for at least 65W at 20V/3.25A; M and L require at least 100W at 20V/5A. The external power source is not included.Features:• USB-C Power Delivery 3.0 input• Isolated power conversion and filtered distribution• 28 Shield connectors in analog/digital zones• Daisy-chain expansion with additional Shields• Three USB-A power outputs sharing the +5V rail• Soft-start; voltage, current, short-circuit and temperature protection• Shield connection cable and six adhesive feet included