4ms - Rotating Clock Divider (Black)
only 2 left
The Rotating Clock Divider (RCD) produces eight divided clock tempos from a single input clock. The divisions range from /1 to /64, including all odd and non-standard divisions such as /3 and /17 and /62. A Rotate CV input re-assigns the division number of each jack, allowing for creative mix-ups and experimentation. A Reset input jack helps to sync/start with an external clock.Features:• Divide-by-1 to Divide-by-64, on 8 output jacks• CV Rotate jack to shift divide-by amount on each jack• CV Reset jack to reset/re-sync all jacks• Optional break-out panels to expand functionality (Auto-reset, selectable Divide-by range, Gate/Trigger, Up/Down-counting)DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
€104.96*
Allen Synthesis - EuroPi
available
Reprogrammable Multi-Function Controller based on the Raspberry Pi PicoThe EuroPi is a project aimed at making Eurorack more accessible and customisable by giving users complete control of the inner workings of a digital module.You can plug the module into your computer using a standard micro USB cable, and entirely re-write the program in Python (https://www.python.org) usingany of the inputs and outputs for whatever you want. It can be used to replicate existing concepts, such as a quantiser or sample and hold, or you can write something entirely new.All of the information about this project can be found on the GitHub Repository. This includes the build guide, bill of materials, license details, and firmware.There is also a Subreddit if you'd like to share your builds, ask any questions, or just join the community!Features:• 6 CV Outputs (0-10V)• 1 CV Input (0-10V)• 1 Digital Input (Clock, Gate, Trigger)• 2 Knobs (12 bit)• 2 Push Buttons• 128x32 OLED DisplayDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
€136.85*
Befaco - MuDi
available
Clock Multiple, Conditioner, and Divider in a compact 2 HP formatDistribute your clocks throughout your system using minimal rack space.The first three outputs maintain the same frequency as the input, while outputs 4 to 7 provide time divisions of 1/2, 1/4, 1/8, and 1/16.The active topology allows you to patch clocks on the fly, avoiding the tempo interruptions that can occur with passive multiples.To reduce the footprint, the input is a TRS jack, with the clock signal on the tip and the reset on the ring. For standard clock only operation, use a regular mono cable, or use the provided splitter to access the reset function.Features:• IN Accept pulses greater than 2V.• Scale all clocks to 10V.• Accept audio rate square waves for suboctave generation.• 7 Outs: 3 conditioned copys + 4 quadratic divisions.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€62.00*
Frequency Central - High Towers
sold out at the moment
High Towers is a programmable 4 channel voltage controlled clock divider. It is able to receive external clock and reset pulses. Divides the incoming clock pulses by 1, 2, 4, 8, 16, 32, 64 and 128. Each of High Towers 4 assignable outputs can stream any of these divisions.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
€100.00*
Herbs and Stones - Pathways
sold out at the moment
This is the DIY version of this unit.Pathways is a modular matrix mixer designed for feedback manipulation, creative routing, weird synthesis… and many other things.Based around sixteen analog VCAs it can be the central hub of many different setups and a bridge between desktop gear and eurorack systems.Features:• 4x 1/4″ inputs with gain / drive control, 4x 1/4″ outputs• Each of the 16 matrix intersections can be controlled manually or via CV, a dedicated LED gives visual feedback of the channel volume• An envelope follower is normalled to input four, the signal then gets fed through a clock divider with three cascaded outputs. Willingly, an external signal can be inserted into the divider• Two voltage controlled LFOs can modulate any parameter and create dynamic feedbacks, asymmetrical panning, tempo-related fx send/returns• If patched into itself, each channel can self oscillate so it can be used as a polyphonic cv-controllable drone synthesizer• full eurorack compatibility, each parameter has its own 1/8″ input jackDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled unit. The kit includes all parts to build the unit. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€342.00*
Herbs and Stones - Solid Felt
sold out at the moment
This is the DIY version of this unit.Solid Felt is a stereo multimode analog filter in desktop format.Its name comes from the etymology of the words “stereo” and “filter”.From subtle timbral variation to an all-encompassing sonic treatment, Solid Felt can be used in multiple ways to embellish or vandalize your sound bouquet:As two independent mono filtersto give a stereo treatment to a mono signalto filter a stereo signal at the same cutoff frequency on the L and R channelsAs a mono 24dB/oct filter (placing the two filters in series)To synthesize sounds, via external feedback patchingTo extrapolate a CV signal from your audio input and use it to control any of its parameter or external gearAs a stereo overdrive effectTo bring line level signals to Eurorack levelFeatures:• 2x Analog multimode analog filters• 2x 1/4″ jack high impedance inputs• 2x 1/4″ jack low impedance outputs• 8x 1/8″ jack eurorack compatible CV inputs• 8x 1/8″ jack eurorack compatible CV outputs• Input gain control to amplify incoming signals up to fuzzy territory• mode control to select between lowpass, bandpass and highpass filter response (CV controllable)• an envelope follower (normalled to input A) which is fed into a three stage clock divider• a voltage controlled LFO with waveform blend control and two outputs 180° out of phase• a voltage controlled LFO with rising and falling sawtooth outputsDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled unit. The kit includes all parts to build the unit. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€355.00*
Jolin - Krono
available
KRONO is a clock and rhythm generator module offering 12 independent outputs split into two groups, packed with 10 versatile modes ranging from Euclidean to chaotic rhythms. Designed for creative timing control, it features weighted tap tempo, external sync, state persistence across power cycles and a unique swap function for inverting output group behavior. With visual feedback LEDs, fixed base clock outputs, USB-C programming, and open-source firmware, KRONO is a flexible and inspiring tool for rhythmic experimentation.Features:• 12 Clock Outputs divided into two groups (A/B)• 10 Operational Modes covering standard, mathematical, musical, probabilistic, and chaotic rhythms.• Weighted Tap Tempo & External Sync• State Persistence: Saves Tempo, Active Mode, and Swap State for each mode, retaining them across power cycles.• Calculation Swap: Inverts functions between groups via the MOD button or external gate.• Visual Feedback: the Status LED indicates the active mode; the Auxiliary LED signals state changes (tap, mode select, swap).• Fixed Base Clock Outputs: Outputs 1A and 1B always provide the unmodified main clock.• Hardware Platform: Based on CPU STM32F411.• Open Source: Firmware developed with PlatformIO (C/C++), customizable.• Programming: Via USB-C DFU.• “whatever” power connector – don’t mind the polarity, it’s protected eighter way.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€130.00*
Patching Panda - Rewire
only 2 left
REWIRE is a 4×4 sequential switch and versatile signal router that lets you reconfigure a modular patch on the fly without touching cables.The module offers four inputs and four independent outputs, each with level control, switching logic and real-time manipulation and is built for dynamic signal flow, generative systems and performance precision. Fully clocked, resettable, shiftable and divisible, REWIRE functions as a patch programmer and performance brain in just 8 HP.Applications range from rotating LFOs across destinations and shifting melodies between voices to remapping triggers for generative grooves, stepping audio through multiple FX chains rhythmically, or using the faders as a simple manual preset bank.Features:• 4 inputs – 4 independent outputs (4×4 routing matrix)• Per-output level attenuverter (precision gain for each destination)• Sequential-switch for automated step-based routing• Clock input for tempo-synced switching• Resettable and shiftable for pattern control and live manipulation• Divisible/ratio modes for polymetric or subdivided switching patterns• Real-time manipulation – change routing without touching cables• Works with audio, CV and triggers (low-latency switching)DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€149.00*
Shakmat - Time Apprentice (1U)
only 2 left
The Time Apprentice is a compact dual configurable clock divider. The dividers have their own set of divisions, perfect for applications such as clocking and resetting sequencers, syncing pingable modulation sources or triggering events. A set of jumpers at the back of the module allows for personalisation of the divider’s behaviour.Features:• Dual clock dividers• Dedicated potentiometer for each divider with two different ratio ranges• 4 jumpers at the back allowing customisation of the dividers (triggers/gates, auto-reset, alternative clocking)• Skiff friendly (25mm deep)• Intellijel and Pulp Logic format supportedDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€51.17*