Trigger
available
The Robaux SWT16+ is a 16-track eurorack trigger sequencer with up to 64 steps per track.The Sweet Sixteen Plus is perfect for triggering drums, envelopes or modulation sources.With the new member of the Robaux family, you can switch between eight different patterns.This will allow you to create even more exciting performances. You can store these patterns in up to 16 memory banks.Program your tracks step by step. Play your tracks on the fly. Or just use the new Euclidean rhythm generator.The new design has even more crazy flashing buttons! With the improved menu navigation, you can use the sequencer even more intuitive.The sequencer offers 16 different modes to create and modify rhythms. Modes are divided into four distinct areas:Create, Perform, Track Settings and Sequencer Settings.Randomize your tracks, move your steps or reverse your patterns. With these tools, you can discover entirely new rhythms.And the new Coin function adds even more variety to your beats.Features:• Number of Tracks: 16• Number of Steps per Track: up to 64• Number of Presets: 16• Number of Patterns per Preset: up to 8• 1 x Clock In• 1 x Reset In• 16 x Trigger Out• 1 x MIDI Out (Alternative firmware and adapter required)• 28 x backlight silicon button padsDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
The SetonixSynth Detectorist is a 2 HP Gate-to-Trigger-to-Gate module, designed to provide useful “duty cycle”-like behavior from any sharp rising edge input.When triggered by either the gate input jack or manual pushbutton, the Detectorist will produce an adjustable-length pulse, spanning in length from 12 milliseconds - about 85 seconds over its three ranges. If the Detectorist is re-triggered while the output is already active, the count will reset but the output will remain active without dropping to zero, thus “tying” the pulses, or producing 100% duty cycle.Features:• Converts any rising-edge pulse to a gate with three time ranges• Overall hold range of 12ms - 85 seconds• Manual gate trigger/hold button• Capable of re-triggering while output is activeDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
AlgoRhythmic Generator. Two outputs and five different rhythmic flavors multiply by a load of “algo-rhythmic” processing to result in a practically infinite number of polyrhythms. That’s the fundamental formula that produces the Knight's Gallop principle : a dual trigger generator providing sequences according to tables and modes.The source tables contain patterns such as the Euclidean polyrhythms, and the modes allow the user manipulate and mangle those patterns according to different algorithms. As the module has two outputs, it is a very powerful instrument to create diversified and instantaneous polyrhythms.Features:• Dual Output Trigger Generator• Variable length sequences (up to 16 steps)• Length and Pulse amount potentiometers and CV inputs• Shift + & shift - buttons allowing to shift the sequence forward and backward• Main mode (MN) providing a lot of utlity modes for the second output : reset, no shift, invert and reverse• Compute mode (CP) calculating associated sequences for the second output delivering very musical polyrythm• Random mode (RD) adding randomness on the second output sequence, 4 amounts of randomness determined by the sub mode• Dual mode (DL) allowing to set the two outputs seperatly• Record mode (RC) turning the Knight's Gallop into a “play your sequence on the buttons to record it” module• Five different kind of tables for five different rythmic flavours : Divider Sequences, Classic Euclidean, Revised Euclidean, Anti Euclidean & Split Sequences• User replaceable firmware chipDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
available
Chaotic voltage generator in 3HP. It is a unique module because it has never existed as an electronic music instrument until now. The module is based on a circuit from a paper called “A simple chaotic circuit with a light-emitting diode” written by Volos, Wang, Jafari, and Kapitaniak.Diode Chaos produces 3 phases of interrelated morphing voltages including a chaotic trigger out. The range is 20-30 seconds a cycle up to audio rate, although only the X out and TRIG out go up to audio rate. The frequency is controlled by the RATE knob. Each output exhibits different behavior at different rate settings. X,Y, and Z outs like to stay in the 4vpp range although at different RATE settings the outs can reach 10vpp. The TRIG out chaotically releases 0-10v triggers although sometimes it will spit out smaller voltage peaks.LED soldermask windows provide constant display of positive and negative voltage crossings. Differences between chaos and random (some quoted and summarized material from Ian Fritz’s site) chaos is “highly irregular, but still contained within a finite region (the “strange attractor”)”. Chaos occurs in 3 dimensions chaos needs a non-linear element (with Diode Chaos the nonlinear element is a red LED, and the chaos is directly visible and useable at the TRIG out).DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.