Filter
333modules - Integrator DJ

only 1 left

Input module with DJ influence, RCA in and selectable line and phono input (RIA filter), with three modular level outputs Left, Right and Mono sum. Level gain with fader volume for live purposes.Features:• RCA input• Phono (RIA) or line• Gain and fader volumen• Stereo a Mono sum Output modular levelDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
€107.10*
ADDAC System - 304 Manual Gates

available

With the ADDAC304 Manual Gates you'll be getting 8 manual gates (0 +5v) in a nifty package - a perfect way to perform on and control your modular system.The ADDAC304 comes with an interesting twist: 4 out of the 8 available gates can act as momentary switches, outputting the signals in their respective inputs when each gate’s button is pressed.DIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.
€75.00*
ADDAC System - 305 Manual Latches

available

The ADDAC305 Manual Latches is a combination of 8 manual latching switches in a small and elegant module: each button toggles between Gate high / Gate low when pressed, outputting a 5V gate signal. Additionally, 4 of the 8 available latches sport inputs and can act as manual latching switches, allowing the incoming signal to pass to the output when the button is toggled.DIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.
€90.00*
ADDAC System - 306 VC Transitions

only 2 left

ADDAC306 is a 5 channel multi-directional CV generator.You can think of it as a "sweet spot" controller, or a hands-on way of transiting from one state to another.Each of the five channels has MINIMUM, SPAN and DIRECTION controls, a common CV IN and a common TRANSITION CONTROLLER slider.MINIMUM sets the minimum channel voltage.SPAN sets the voltage range of the channel.It essentially sets the maximum voltage that can be output from the channel, relative to what the current channel MINIMUM is. For a given SPAN value, if the MINIMUM voltage is changed then the maximum voltage output from that channel will also change respectively.DIRECTION sets whether the voltage transition for each channel goes from MINIMUM to maximum, or maximum to MINIMUM.The TRANSITION CONTROLLER slider controls the transition from the minimum value (A) to the maximum value (B) or vice versa, according to the settings of each independent channel.Moving this slider generates 5 different voltages with 5 different ranges and directions. The transition can also be operated from a CV source at the CV IN, in which case the slider position acts as an attenuator for the incoming voltage.The maximum range of each channel can be set to either 5 or 10 volts, by 5 jumpers in the back of the module. Only positive voltages are generated at the output.Using the CV IN you can use two ADDAC306 modules to expand your control options to 9 voltage outputs under one common slider control.Use the VC Transitions to multiply the polyphony of a single CV sequencer by passing its outputs through the ADDAC207.VC Transitions makes for an awesome state transition controller. Plug its outputs to various CV controller parameters of your audio effects modules. Set the slider to position A, and set the minimum values for each channel. Then move the slider to position B and set the SPAN settings for each channel. Use the TRANSITION CONTROLLER slider to morph from state A to state B and backwards. Flip the DIRECTION switches to change the direction of the transition for each channel. Use the CV IN to automate the transition using LFOs, ADSRs or sequencers.Plug the output of your ADSR envelope to the CV IN and set the channels differently to get 5 different ADSRs from one common source.This module's development was based on an initial idea by Konstantine Fioretos.DIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.
€113.90*
ADDAC System - 805 VC Signal Router V2

available

Inspired by our ADDAC701 VCO waveform mixing section, our new VC Signal Router also updates our legacy X-Fade/Panner to a stereo configuration that also allows 4 quadrant mixing.Featuring two dedicated X-faders and a stereo VCA that can also be used as a third X-Fader. All controls have their own CV inputs and dedicated Attenuverters for precision control.4 quadrant mixing is achieved by using the stereo Master as a X-fader between left and right channels, this way you can plug 4 audio sources and sweep/crossfade between each and any of them using the 3 x-faders. Plug any 4 sources (4 waveforms of a VCO, 4 LFOs, 4 envelopes...) and sweep through morph through or have them all mixed together.For other configuration types Left and Right X-fader channels can be routed through the Master stereo VCA or sent directly to the outputs. A stereo Direct input can also be routed through the Master VCA or sent straight to the outputs.The Mono Sum output always mix Left and Right outputs together allowing the possibility to use the module as a peculiar 6 channel mono mixer.It can be used for both Audio or CV Signals.Features:• 6 mono inputs• 2 dedicated X-faders with Control knob + CV Input and Attenuverter Each X-fader can be routed through the Master mix or straight into the outputs.• Master channel can be used as a stereo VCA or an X-fader• Stereo direct inputs can be routed through the Master mix or straight into the outputs.• Fully analog audio path with high quality/low noise VCAs.DIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.
€168.90*
Allen Synthesis - EuroPi

available

Reprogrammable Multi-Function Controller based on the Raspberry Pi PicoThe EuroPi is a project aimed at making Eurorack more accessible and customisable by giving users complete control of the inner workings of a digital module.You can plug the module into your computer using a standard micro USB cable, and entirely re-write the program in Python (https://www.python.org) usingany of the inputs and outputs for whatever you want. It can be used to replicate existing concepts, such as a quantiser or sample and hold, or you can write something entirely new.All of the information about this project can be found on the GitHub Repository. This includes the build guide, bill of materials, license details, and firmware.There is also a Subreddit if you'd like to share your builds, ask any questions, or just join the community!Features:• 6 CV Outputs (0-10V)• 1 CV Input (0-10V)• 1 Digital Input (Clock, Gate, Trigger)• 2 Knobs (12 bit)• 2 Push Buttons• 128x32 OLED DisplayDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
€136.85*
AtoVproject - 16n Rework (Black)

available

The 16n AtoVproject Rework is aimed at solving a problem very specific to modular synthesis. As a patch is getting more and more complex a forest of cables has grown over your system before you know it. This module allows you to take the control from the modular into a very ergonomic controller that integrates perfectly into a modern studio.The 16n AtoVproject Rework is a controller sending CV, I2C, MIDI jack, USB MIDI (compatible PC, Mac, iPad etc...), making it the absolute ultimate controller for any of your hardware and software all in one!Even better this controller can either be used as a Eurorack module or as a standalone unit using the beautiful aluminum enclosure.In 2019, the Berlin Modular community showed interest in building the 16n Faderbank. As one of the Berlin Modular community organizers, I decided to make a redesign of the 16n faderbank following the suggestions and desires of our members. The 16n AtoVproject Rework is the result.Features:• 16 high-end Alps faders• Eurorack compatible (50hp) and standalone enclosure (for use in or out of the rack)• Selectable 0-5V or 0-10V CV output range (independent setting for each fader)• High stability power conditioning for high stability analog outputs• Soft MIDI thru. MIDI data sent to the 16n through USB is echoed to the MIDI jack (Since firmware v2.1.0)• Utility connector on the back of the unit to simplify the use of i2c with modules like the ER301DIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.
€279.00*
AtoVproject - 16n Rework (Silver)

sold out at the moment

The 16n AtoVproject Rework is aimed at solving a problem very specific to modular synthesis. As a patch is getting more and more complex a forest of cables has grown over your system before you know it. This module allows you to take the control from the modular into a very ergonomic controller that integrates perfectly into a modern studio.The 16n AtoVproject Rework is a controller sending CV, I2C, MIDI jack, USB MIDI (compatible PC, Mac, iPad etc...), making it the absolute ultimate controller for any of your hardware and software all in one!Even better this controller can either be used as a Eurorack module or as a standalone unit using the beautiful aluminum enclosure.In 2019, the Berlin Modular community showed interest in building the 16n Faderbank. As one of the Berlin Modular community organizers, I decided to make a redesign of the 16n faderbank following the suggestions and desires of our members. The 16n AtoVproject Rework is the result.Features:• 16 high-end Alps faders• Eurorack compatible (50hp) and standalone enclosure (for use in or out of the rack)• Selectable 0-5V or 0-10V CV output range (independent setting for each fader)• High stability power conditioning for high stability analog outputs• Soft MIDI thru. MIDI data sent to the 16n through USB is echoed to the MIDI jack (Since firmware v2.1.0)• Utility connector on the back of the unit to simplify the use of i2c with modules like the ER301DIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.
€279.00*
Befaco - CV Thing

only 2 left

CV Thing is a fully mappable CV to MIDI converter in just 6HP. Its based on our VCMC module, but aiming for small and compact performance rigs. It has eight inputs that can be mapped to any MIDI message quite easily thanks to its simple and intuitive user interface. CCs, Program change ,V/Oct to Note or Clock are some of the messages that can be configured to easily control MIDI gear from your modular rig.Features:• Class-compliant USB MIDI and TRS connectors.• TRS to DIN5 Type A adaptor included.• 8 CV inputs.• Controls fully mappable to any MIDI message (CC, Notes, Program change, Clock, ST/SP, NRPN…)• Configurations are saved both in internal memory and via Sysex.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
€176.12*
Befaco - Joystick

available

A compact attenuverting (attenuator-inverter) joystick controller and Gate Generator. With it, you can generate and process two control voltages using only one hand. Provided controls for CV ranges and offset adjust the boundaries of your control, this way it never gets out of the desired range, ensuring sensibility and playability even with wild performance gestures.Features:• Robust arcade style joystick for manually generating either CV with Range and Offset control or attenuating two input signals• Two push buttons to generate gates manually.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
€113.05*
Befaco - Lich

sold out at the moment

Lich is a programmable multi-function module based in the Rebel Technology OWL platform that allows you to use Pure Data, Max Gen or Faust code into your module!.Lich is a Befaco Rebel collaboration that brings back Owl’s platform with this new hardware iteration. It has stereo in and out, four pot controls summed to cv inputs (like the classic Owl module) And as addition, CV and Gate outputs, patch selection with display and USB MIDI host and device connections.Features:• Stereo Audio IN and OUT at 48k 24 bits.• 4 CV controls (Pot + Attenuated CV in)• 2 CV outputs.• 2 Gate intputs + buttons.• 1 Gate Output.• Patch selection and visialization via display.• USB host and Device connectionsDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
€201.11*
Befaco - Morphader

available

Morphader is a performative tool designed to make multichannel CV/Audio crossfade easy and comfortable. Fading from one quad CV/audio scene to another. The core of the module has four CV controlled crossfaders, each with their individual control and a master fader to control them all. The module mixes the four crossfades at its fourth output, thanks to a clever normalization scheme. Each of them can be easily removed from the mix by plugging a cable at its own output.Features:• CV Controlled four channel crossfader.• Attenuators per input.• Normalized voltages to every input, allowing cv levels morphing.• Audio CV response switch per channel• Master Fader control with Lag.• Leds per channel for signal level monitoring.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€165.41*
Befaco - VCMC

only 1 left

This thing is totally awesome! Why? Imagine your plugins being controlled from your modular by CV! VCMC is a voltage-controlled MIDI controller. A fully editable MIDI controller with eight faders and push-buttons. Each of them with a CV or Gate input associated to automate their functioning via external signals or to be configured independently for further control. Each control on VCMC can be edited on its OLED screen and will be output either via DIN-5 or USB as a class-compliant MIDI device. DIYers can modify the module to make it standalone.Features:• Class-compliant USB MIDI and DIN5 connectors.• 10 CV inputs And 8 gate inputs.• 8 Faders and 8 Buttons.• Controls fully mappable to any MIDI message (CC, Notes, Program change, Clock, ST/SP, NRPN…)• Configurations saved both in internal memory and via Sysex.• Online Web EditorDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
€210.63*
Befaco - Voltio

only 2 left

An accurate voltage source and precision adder. Voltio fits somewhere between a music tool and a piece of electronics lab gear.It generates voltages equivalent to all the notes on the 12-tone equal temperament scale throughout a ten-octave range, with an intuitive two-knob interface.The Precision Adder In, lets you sum Voltio’s Out with external voltages.Additionally, the front panel banana connectors let you plug standard multimeter probes for hands-free operation on electronics lab.Use it to transpose Oscillators and sequences in a musical way or as a reference to calibrate your analog gear.Features:• Easily adjust your oscillators in known intervals.• Transpose Musical phrases from sequencers, arpeggiators, or any other notes source.• Calibrate oscillators and filters on your DIY projects or during analog gear maintenance.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
€94.00*
Befaco / Divkid - MUTES

available

Mutes goes above and beyond basic muting by allowing you to split groups of signals to multiple destinations, making it great for FX dub performing and varied signal routing.Vactrols on the circuit gives to the switching a pleasing decay for both audio and modulation as well a totally click free muting.Three-position switch: MOMENTARY signal pass-through (it springs back to the center when released); OFF (or muted) in the center; and ON to the right.This module is designed in collaboration with Ben Wilson aka Divkid.Features:• LEDs to visualise signals• 3 way momentary – off – on switching• Buffered and cascading normalising of inputs• Black metal panel• Vactrol based mutingDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€94.01*
Befaco / Molten Modular - Motion MTR

available

Motion MTR allow you to mix, attenuate and invert signals while having clear visual feedback of their levels.Each channel can function as:• Audio level control with VU meter• CV attenuator with voltage meter• CV inverter with voltage meterEach input is normalled to 10v, so you can use each of them to generate fixed voltages. Also, the outputs of channels 1 and 2 are summed into Out 3 to be used as a mixer. Patch it wildly to make it work as an attenuverter with offset, as a mixer, a VU meter or a combination of them all!This module is designed in collaboration with Robin Vincent from Molten Modular.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
€113.05*
Befaco / Molten Modular - Motion MTR 1U

only 2 left

This is the 1U version of the module, for the 3U standard version please check the other product!Motion MTR allow you to mix, attenuate and invert signals while having clear visual feedback of their levels.Each channel can function as:• Audio level control with VU meter• CV attenuator with voltage meter• CV inverter with voltage meterEach input is normalled to 10v, so you can use each of them to generate fixed voltages. Also, the outputs of channels 1, 2 and 3 are summed into Out 4 to be used as a mixPatch it wildly to make it work as an attenuverter with offset, as a mixer, a VU meter or a combination of them all!This module is designed in collaboration with Robin Vincent from Molten Modular.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€121.38*
Exploding Shed - Touch Source

available

Explore wireless patching through Touch Points! Touch Source generates voltages between -10V and +10V, in the center is a touch plate with GND/0V. Place the Touch Points on any CV input of a module and connect a voltage to the Touch Point via your fingers. Or connect two Touch Points from any input to output through your body. Rule #1 is: there are no rules!Here is a review on Amazona (german) and some demo videos here and there.Touch Source includes 2 black Touch Points. Packs of 5 Touch Points are available separately in black or orange to visualize your signal flow. Packs of 2 indicator Touch Points with bi-plar LEDs are also available.The unit is pre-assembled and no DIY.
€40.00*
Herzlich Labs - Apnea 3

available

I know what you want: you want to make something go silent, fast.You want nice, tactile clicky goodness. You want half the size, half the price and exactly as much utility - and buddy, you've found it.Introducing the Apnea 3, 3 mutes that'll make your patch go dead quiet in the click of a button. No funky clicks, no weirdness, just a kill switch that kills your incoming CV or audio signal, ready to be revived with another click of the button - and did I mention it's 2hp? Did I mention it's passive and draws no power? Did I mention it's skiff friendly? Did I mention it's really nice and also good?Finally, the unit is designed to be turned either way, for maximum ergonomic pleasure and utility. You can even choose yourself whether pushing the buttons down will mute or unmute. Neat!Also an excellent gift for the unskilled modular musician who insists on not using headphones.Features:• Quick, simple and customizable build.• Very high utility-per-hp factor and no power requirements.• Works well with both CV and audio signals.• Nice tactile buttons without actuation noise bleeding into your signals!DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
€39.92*
Music Thing Modular - 8mu MIDI-Controller

sold out at the moment

Pocket-sized MIDI controller with built in Accelerometer!The 8mu is a pocket-sized MIDI controller (slightly smaller than a credit card!) with eight faders that can send messages via MIDI. The 8mu also has a built in accelerometer which measures how the device is being held. This creates eight more control signals, mapped to gestures like “lift the front” or “turn me over”. There are four tiny buttons along the top edge, which can be configured to send MIDI notes (like a keyboard) or control signals.MIDI data is sent via a 3.5mm TRS MIDI output, which can be Type A or Type B, and via USB-C. Only standard USB data lines are used, so it should work on any USB computer with an adaptor. The device is also powered via USB. 8mu can store 8 banks of CC settings which can be accessed using the left and right buttons on each side of the device.8mu has a web editor where you can edit all the settings: Launch the 8mu Editor, and there is a quickstart guide printed on the back or get a quickstart PDF by the buttons below.The 8mu design was inspired by the 16n project but the hardware is quite different. The editor is a modified version of the 16n editor by Tom Armitage. 8mu cannot send i2c or CV, but it’s designed to be open and hackable and can be re-programmed in Arduino or Circuit Python code.Features:• Size: 81 x 47 mm• The body is 13 mm tall, or 24 mm with the faders and fader caps• It weighs 65 gDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€138.00*