Mixer & Att. Various
only 1 left
The Harlequin's Context is a theatre piece in 16 scenes and 4 acts. In those scenes, four channels can shapeshift into different roles such as: offset, random, LFO or envelope. Scene selection can be done manually or can be addressed / sequenced with the CV and gate inputs depending on the set configuration.Packed in 12hp with a ton of features, the Harlequin's Context is a powerful tool to prepare a live set with, and to create very peculiar modulation signals in the studio.Features:• Quad channel modulation presetter• 16 scenes manually selectable, CV adressable or sequenceable with a clock signal• 15 different modulation algorithms : Offsets, LFOs, Randoms, Envelops or Serial• 14 different sets, defining the way the module reacts to the CV and Gate inputs• Morphing mode allowing to morph different modulation types• Non-volatile memory of 16 slots of 16 scenes• Select bus compatible as tranmsitter or receiver• Djtechtools rubber injected potentiometersDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
available
A Genuine Wave Craftsman! The Jeweler Cast melts, bends, and chisels all types of signals, audio, or CV. Composed of two independent sections, the Mix, and the Shaper, the Jeweler Cast combines a ring modulator, a crossfader, a wavefolder and a distortion. Thanks to its tool ensemble, this fully analog yet compact module can manipulate basic waveforms and complex signals in infinite ways.Features:• Mix section crossfading between three sources including a ring modulator• Shape section acting as a wavefolder or a heavy distorsion• Bypass (dry signal) of the shape section at minimum setting• Processing audio or CV signals• AC coupling switchDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
available
The Threetom Modular “Mixing Flask” is a utility mixer offering mix-bus limiting and a cornucopia of indicator lights integrated behind a unique chemical lab-inspired front panel.I designed Mixing Flask as a solution to my main three gripes with conventional utility mixers:• Mixing too hot is too easy, leading to hard clipping on the mix-bus. And even when there’s an indicator light to warn you when this is happening, there are no features to actively prevent it.• Utility mixers usually only offer unity gain, so when you have a weak input signal (like a MTM Radio Music), you’re out of luck• They’re nauseatingly boringMIXING FLASK provides solutions to these annoyances in the following ways:• I’ve implemented a soft-clipping limiting circuit on the mix-bus (inspired by DOPPIO). The highest setting prevents the mix-bus from hard clipping altogether in favor of warm saturation.• All inputs have a gain of +6dB allowing you to better equalize between volumes while maintaining a hot mix-bus output• The myriad of indicator lights and front-panel graphics make you feel like a mad scientist in your modular chemical lab. I bet you won’t find another utility mixer that makes mixing more exciting than Mixing Flask!Use cases:• Mix oscillator waveforms without the risk of hard-clipping• Mix CV signals while keeping an eye on what’s coming in and going out• Give a gentle boost to weak input signals (e.g. from a sampler module)• Have a utility mixer in your case that’s interesting to look at, and doesn’t bore you to death!Features:• Three different flavors of saturation on the mix output (hard clipping, soft/hard clipping, or soft-limiting)• Three inputs with up to +6dB of gain, and bipolar monitor lights• One mix output with three-stage bipolar monitor lights (signal present, signal nominal, hard-clipping warning)• Backlit chemical-lab-inspired front-panel graphicsDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
available
Path is a compact 4-channel interpolating router, developed with Ben Wilson (DivKid), and inspired by our previous module, Trace. While Trace blended signals, Path flips the concept—routing one input to four outputs with smooth, slope-based transitions.Built around the same DC-coupled interpolating core as Trace, Path handles audio and CV signals effortlessly. Its normalized fixed voltage input also transforms it into a powerful modulation source—no patching required.Designed for flexibility and performance, Path brings fluid, organic movement and creative control to any modular setup in a streamlined footprint.Features:• Four channels• DC-Coupled outputs for use with both audio and CV signals.• Custom fading slope designed to improve the response on middle positions.• CV-controlled routing with onboard attenuation and inversion of the modulation signal.• Fixed voltage normalled at the input.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
available
Dual summed mute Attenuator, Offset Generator, Mixer, and Mute in 2HPThe newest 666 version (2021) can be powered and will provide Offset of 0-5V with nothing plugged into the “IN” for each channel controlled by each respective Potentiometer. The “Sum Out” will also be able to send out 0-10v~ volts depending on the setting of each Potentiometer. Both channels are normalled to the sum, so inserting a signal into an “IN” will remove it from the “Sum Out. There will be signal loss at the sum out, because the module is passive. Great for cv or audio although the module ships with linear pots.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
This is the panel PCB version of this kit.Dual summed mute Attenuator, Offset Generator, Mixer, and Mute in 2HPThe newest 666 version (2021) can be powered and will provide Offset of 0-5V with nothing plugged into the “IN” for each channel controlled by each respective Potentiometer. The “Sum Out” will also be able to send out 0-10v~ volts depending on the setting of each Potentiometer. Both channels are normalled to the sum, so inserting a signal into an “IN” will remove it from the “Sum Out. There will be signal loss at the sum out, because the module is passive. Great for cv or audio although the module ships with linear pots.DIY-Kit-Type:Panel/PCB Kit. This is a do-it-yourself panel/PCB kit, no parts are supplied, you will need to source them yourself.