Output & Headphone
only 1 left
Expandable 4 channel VCA based stereo mixer with tone shaping and FX bus. Strips is also expandable! You can add a second strips, connected to the first via a 16 pin to 16 pin cable. The cable powers the second Strips and gives you 8 channels to play with. The second Strips accesses the first Strips FX bus. When using in expanded configuration, the FX send/return and main outputs for the second Strips are not available.FX phase jumper – because not all FX that you might use in the FX loop are in phase with respect to their input/output. The phase jumper allows you to compensate for this and avoid weird phase cancellations.Features:• 4 x input channels, each featuring LEVEL, HIGH, LOW, FX send, PAN, MUTE and CV control of level.• FX send and stereo return + FX phase jumper• Left and Right Eurorack level inputs (2 x 3.5mm sockets)• Left and Right line level outputs (2 x 6.35mm sockets)• Scribble strips!DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
only 2 left
TUTTO&SEMPRE is a stereo performance mixer with 4 channel strips, an active patchbay, individual VCAs, clickless mutes, individual post attenuation direct outs, a main balanced stereo output and two high fidelity headphones drivers with switchable stereo inserts.Features:• Four channel stereo performance mixer.• Signal path optimized for the integration between modular systems and outboards.• Versatile mixing frame with an active patchbay, stereo attenuators, paired VCAs and clickless mutes.• Line level balanced L and R output + combined stereo with master auxiliary input.• Two independent headphones drivers with switchable individual stereo preview input.• “Whatever” power connector a.k.a. don’t mind the polarity.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
only 1 left
Startup is a headphone amp, six-input mixer, tap tempo clock, divider & multiplier in 4hp. It's the perfect way to start a small Eurorack case. Full DIY Kit.Startup is designed to be the best way to start a small Eurorack case, featuring a Mixer, Clock & Headphone Amp. This is a really easy project for DIY newcomers, all the SMD components come pre-soldered and the PCB is programmed and testing prior to shipping. You just need to solder the buttons, jacks and pot. The Music Thing Modular ‘Startup’ is designed to be the best way to help start a small Eurorack case.This 4HP module does three things:1) It’s a 5 channel output mixer, with a spare channel for stereo signals (like a Korg Volca or a phone).2) It’s a nice clean headphone amp with two outputs.3) It’s a useful tap-tempo clock, with a second channel giving divided or multiplied clocks.The best way to understand Startup is with with the Quick Start Manual. (Use button below)DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
only 1 left
ST MIXER XL is effectively an eight channel stereo mixer with a really good sounding headphone amplifier built in. It is designed to be the final output module of a larger system that you want to use with headphones and simultaneous recording via 1/8 inch stereo jack cable to a portable recorder.The module consists of four mono channels with level, panning and aux send control, and two stereo channel with level control and separate inputs for left and right. The stereo PHONES and LINE OUT outputs also have level control. The AUX output is a mix of the aux sends from the four mono channels. The OUT 1 is a buffered direct out from channel one, to feed to a looper for instance.ST MIXER XL is perfect for a larger system with up to four mono synth voices and a stereo effect. The headphone output can drive most headphones quite well and the line output is perfect for recording with a portable recorder or an audio interface.DIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
Panning Stereo Mixer. ST MIXER is effectively a five channel stereo mixer with a really good sounding headphone amplifier built in. It is designed to be the final output module of a small portable system that you want to use with headphones or for recording via 1/8 inch stereo jack cable to a portable recorder.The module consists of three mono channels with level and panning control and one stereo channel with level control and separate inputs for left and right. The stereo headphone output also has level control.ST MIXER is perfect for a starter system with a couple of synth voices and a stereo effect. The headphone output can drive most headphones quite well and also doubles as a recording output to connect to for instance a Zoom recorder.Headphone output power: 6,4 mW @ 73 ohmsDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
Unleash your creativity with Simple Fix, the rapid prototyping tool designed for synth designers, makers, and musicians. Powered by Daisy Seed microcontroller, Teensy, or Arduino Nano, it's your quick-start solution to bring ideas to life. Effortlessly add knobs, switches, and jacks, and dive into the limitless world of sound and functionality. Whether you're a pro or a passionate hobbyist, Simple Fix accelerates your design process, transforming inspiration into reality faster than ever. Start your journey towards groundbreaking designs today and unlock your creative potential with Simple Fix—where your next masterpiece begins.Features:• Programmable. All Simple kits come with the Daisy Seed microcontroller and access to our introduction to synth programming video course.• Open source instrument on Github.• Each kit comes with a video course teaching sound fundamentals: https://learn.synthux.academy/• Fits in your pocket.DIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
Discover Simple Touch, the go-to rapid prototyping instrument for synth enthusiasts, from designers to musicians. Featuring 12 touch pads, 6 potentiometers, two faders, and stereo input/output, all powered by the dynamic Daisy Seed microcontroller. Simple Touch is engineered to bring your sonic visions to life with precision and ease. Dive into a world where your fingertips command the future of sound, blending intuition with innovation. Ideal for both seasoned creators and passionate hobbyists, Simple Touch is your shortcut to prototype, experiment, and elevate your designs. Embrace the power of touch with Simple Touch, and transform your creative impulses into extraordinary musical inventions today.Features:• Programmable. All Simple kits come with the Daisy Seed microcontroller and access to our introduction to synth programming video course.• Open source instrument on Github.• Each kit comes with a video course teaching sound fundamentals: https://learn.synthux.academy/• Powerful music instrument for live performances.DIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.
available
The Threetom Modular “Mixing Flask” is a utility mixer offering mix-bus limiting and a cornucopia of indicator lights integrated behind a unique chemical lab-inspired front panel.I designed Mixing Flask as a solution to my main three gripes with conventional utility mixers:• Mixing too hot is too easy, leading to hard clipping on the mix-bus. And even when there’s an indicator light to warn you when this is happening, there are no features to actively prevent it.• Utility mixers usually only offer unity gain, so when you have a weak input signal (like a MTM Radio Music), you’re out of luck• They’re nauseatingly boringMIXING FLASK provides solutions to these annoyances in the following ways:• I’ve implemented a soft-clipping limiting circuit on the mix-bus (inspired by DOPPIO). The highest setting prevents the mix-bus from hard clipping altogether in favor of warm saturation.• All inputs have a gain of +6dB allowing you to better equalize between volumes while maintaining a hot mix-bus output• The myriad of indicator lights and front-panel graphics make you feel like a mad scientist in your modular chemical lab. I bet you won’t find another utility mixer that makes mixing more exciting than Mixing Flask!Use cases:• Mix oscillator waveforms without the risk of hard-clipping• Mix CV signals while keeping an eye on what’s coming in and going out• Give a gentle boost to weak input signals (e.g. from a sampler module)• Have a utility mixer in your case that’s interesting to look at, and doesn’t bore you to death!Features:• Three different flavors of saturation on the mix output (hard clipping, soft/hard clipping, or soft-limiting)• Three inputs with up to +6dB of gain, and bipolar monitor lights• One mix output with three-stage bipolar monitor lights (signal present, signal nominal, hard-clipping warning)• Backlit chemical-lab-inspired front-panel graphicsDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
only 1 left
Stereo tube headphone amplifier featuring a balanced 6.35 mm jack output. The right input is normalized to the left, enabling monitoring of mono sources without extra routing, while the low-impedance balanced output preserves transient detail and channel separation for headphones.Carefully engineered with high-quality parts in France, the circuit pairs high-performance OPA2134 audio op-amps with NOS OTK Ukrainian tubes. It accepts small-signal tubes such as 6j1P, 5654, 6AK5 and EF95, offering a warm, analogue character with robust build quality and audiophile-grade components.Features:• 12V and 5v compatible (selectable heaters voltage via jumpers)• Tube sound• Compatible with 6j1P, 5654, 6AK5, EF95 tubesDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.