Processors
available
SINGOLI is a 7 channel DC coupled active combiner with an analogue transient detector output.All the inputs I are equipped with LED meters and a dedicated attenuating potentiometer.O will give you the combined mixed output.T is an additional transient detector out that will fire only when a certain threshold is detected from the sum of all the inputs.The toggle switch activates or deactivate the internal connection to Tutto&Sempre when the two modules are paired together thanks to the included JST cable.Features:• DC coupled mixer with 7 inputs and individual attenuators.• Intensity sensitive LED meters on all the inputs.• Analogue transient detector output.• Toggle switch to activate / deactivate its normalization to Tutto&Sempre.• “Whatever” power connector a.k.a. don’t mind the polarity.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
DivSkip is a 4 Channel Trigger and Gate Processor, with loads of great modes. Bernoulli Gates, Clock Division, Turing, Euclidean Split, Euclidean Classic, Ramp / Gate Length, Retrigger and Pattern.Plug in triggers or gates from a clock, logic module or sequencer and generate new rhythms and variations. Modes include Probability, Clock Division, Turing, Euclidean, Retrigger, Gate Delays and 64 step preset patterns.Features:• 4 Channels of Triggers or Gates• push-to-mute• 8 modes per Channel• LED rings for visualizationDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
The Robaux 3PT is a multimode three-channel control voltage generator.The handy knob with the triple ring-shaped voltage indicator makes the module the ideal performance tool.The Tripot has three control voltage channels which can be adjusted with three parameter trimmers.Instead of using the big knob, the device can also be controlled via the CV input.The module offers seven different modes. These include a performance tool, chord generator, random generator, quantizer, sequencer or LFO.Features:• 1 x CV In, unipolar 5V• 3 x CV Out, unipolar 5V• 3 x ring-shaped led display• 1 x push button• 1 x big knob• 9 x trimmersDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
only 2 left
The Robaux Decision Tree randomly sends a gate to one of three outputs and then to one of three sub-outputs. Generate unpredictable rhythms. You can choose to route a gate to a single random output or play polyphonic gates. Utilize the knob to transition from total chaos to a repeating loop.The latch mode lets you hold an incoming gate. Pair it with a multimode filter to select various filter types. Use it to alternate between a variety of waveforms. The random input routing injects vibrancy into your sound.The DCSN 3 can also function as a traditional clock divider. The signal is split from half to 1/16 on the top four jacks. Additionally, a continuous sequence is output through the lower eight jacks. Odd divisions enable intricate rhythm creation. Utilize it at audio rate for polyphonic chords using just one square VCO.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
The SetonixSynth Detectorist is a 2 HP Gate-to-Trigger-to-Gate module, designed to provide useful “duty cycle”-like behavior from any sharp rising edge input.When triggered by either the gate input jack or manual pushbutton, the Detectorist will produce an adjustable-length pulse, spanning in length from 12 milliseconds - about 85 seconds over its three ranges. If the Detectorist is re-triggered while the output is already active, the count will reset but the output will remain active without dropping to zero, thus “tying” the pulses, or producing 100% duty cycle.Features:• Converts any rising-edge pulse to a gate with three time ranges• Overall hold range of 12ms - 85 seconds• Manual gate trigger/hold button• Capable of re-triggering while output is activeDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
* * * Gemini's Path DIY is now discontinued! * * *This 6 HP skiff friendly amplitude processor is a very handy module to control the dynamics of two signals or mess with the stereo image. Based on a pair of high-end VCAs, an audio to trigger converter and a smart modulation source, the Gemini’s Path allows numerous operations such as decay/gate on amplitude, auto accentuation, side chain compression, auto pan and more!Features:• Dual VCA• Stereo / dual mono dynamic and pannig processor• Low noise and distorsion That Corp dual VCA core• Trigger detector section extracting gates & triggers from any audio / CV signal• 4 dynamic modes : pump, animated pump, expander and holder• 4 panning modes : LFO pan, random pan, auto-pan and granuliser• Simple VCA mode giving direct access to level and panning• Flexible control assignement : shared, dual or independent control with ability to load different modes for each channel• Audio and external inputs DC coupled• Unipolar CV inputs• User replaceable firmware chip• Digital jumper allowing to set dynamic modes sensible to triggers or gates• Current state storing• Skiff Friendly• Djtechtools rubber injected potentiometersDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
The Harlequin's Context is a theatre piece in 16 scenes and 4 acts. In those scenes, four channels can shapeshift into different roles such as: offset, random, LFO or envelope. Scene selection can be done manually or can be addressed / sequenced with the CV and gate inputs depending on the set configuration.Packed in 12hp with a ton of features, the Harlequin's Context is a powerful tool to prepare a live set with, and to create very peculiar modulation signals in the studio.Features:• Quad channel modulation presetter• 16 scenes manually selectable, CV adressable or sequenceable with a clock signal• 15 different modulation algorithms : Offsets, LFOs, Randoms, Envelops or Serial• 14 different sets, defining the way the module reacts to the CV and Gate inputs• Morphing mode allowing to morph different modulation types• Non-volatile memory of 16 slots of 16 scenes• Select bus compatible as tranmsitter or receiver• Djtechtools rubber injected potentiometersDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
available
A Genuine Wave Craftsman! The Jeweler Cast melts, bends, and chisels all types of signals, audio, or CV. Composed of two independent sections, the Mix, and the Shaper, the Jeweler Cast combines a ring modulator, a crossfader, a wavefolder and a distortion. Thanks to its tool ensemble, this fully analog yet compact module can manipulate basic waveforms and complex signals in infinite ways.Features:• Mix section crossfading between three sources including a ring modulator• Shape section acting as a wavefolder or a heavy distorsion• Bypass (dry signal) of the shape section at minimum setting• Processing audio or CV signals• AC coupling switchDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
* * * Tessitura Tailor is gonna be discontinued when sold out. Last ones available! * * *The Tessitura Tailor adds or substracts a precise voltage (from -2 to +2 volts) to the signal received at the CV input. This signal is transposed by octaves, depending on the rotary switch’s position. As the CV input is normalised to 0 volt, the module works without any input as an octave switch.Features:• Switchable CV transposer/generator• Stepped potentiometer allowing transposition from -2 to +2 octaves• Precison trimmer at the back of the module for fine-tunning.• Skiff friendly (25mm deep)• Intellijel and Pulp Logic format supportedDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
The Time Apprentice is a compact dual configurable clock divider. The dividers have their own set of divisions, perfect for applications such as clocking and resetting sequencers, syncing pingable modulation sources or triggering events. A set of jumpers at the back of the module allows for personalisation of the divider’s behaviour.Features:• Dual clock dividers• Dedicated potentiometer for each divider with two different ratio ranges• 4 jumpers at the back allowing customisation of the dividers (triggers/gates, auto-reset, alternative clocking)• Skiff friendly (25mm deep)• Intellijel and Pulp Logic format supportedDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
Casting spells on every boring clock signals, The Time Wizard got a bag full of arcane time-warping tricks. All his magical feats are based on 6 dividers with selectable division factors and 4 switches providing 81 routing variations.This module's occult powers have been harnessed to easily clock and reset other sequencers with odd time signatures, provide weird clock division/multiplication ratios, and create complex poly-rhythmsFeatures:• Sextuple clock divider divided in two sections A and B• Dedicated potentiometer acting on the division factor for each divider• Clock multiplying and weird div / mult ratio abilities for the first section, first section incoming clock can be multiplied by 3 or 4, allowing to get easily triplets from a 16th clock or mult / div association as x4 / 7• Independant clocking or divider association abilities for the second section, so B5 and B6 can get their clock in internaly from B4. For example, associating B4 = /7 and B5 = /16 provide a hit at each clock begining of 4 bars with a 7/4 time signature• Auto-reset available for the first section or the whole module, the autoreset is provided by B6• Additional logic functions for divider A2 : A2 output can provide the following functions : A2 AND B5 or A2 OR A3• Jumper on the back for Trigger or Gate selection for B5 and B6• User replaceable firmware chipDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
Penrose is a very nice CV quantizer DIY kit for the Eurorack format. It takes an incoming continuous CV voltage and converts it to the nearest note in a scale. Active notes can be selected with the 12 buttons. You can use it to tune the output of your analog sequencer, as a semi random melody generator, for fast chiptune arpeggios and much more.It comes as a complete kit with all needed parts to build it. That includes an aluminum frontpanel, high quality jacks and illuminated bi-color push buttons. The project is open source, so the schematic and source code is available.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
Unleash your creativity with Simple Fix, the rapid prototyping tool designed for synth designers, makers, and musicians. Powered by Daisy Seed microcontroller, Teensy, or Arduino Nano, it's your quick-start solution to bring ideas to life. Effortlessly add knobs, switches, and jacks, and dive into the limitless world of sound and functionality. Whether you're a pro or a passionate hobbyist, Simple Fix accelerates your design process, transforming inspiration into reality faster than ever. Start your journey towards groundbreaking designs today and unlock your creative potential with Simple Fix—where your next masterpiece begins.Features:• Programmable. All Simple kits come with the Daisy Seed microcontroller and access to our introduction to synth programming video course.• Open source instrument on Github.• Each kit comes with a video course teaching sound fundamentals: https://learn.synthux.academy/• Fits in your pocket.DIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
Discover Simple Touch, the go-to rapid prototyping instrument for synth enthusiasts, from designers to musicians. Featuring 12 touch pads, 6 potentiometers, two faders, and stereo input/output, all powered by the dynamic Daisy Seed microcontroller. Simple Touch is engineered to bring your sonic visions to life with precision and ease. Dive into a world where your fingertips command the future of sound, blending intuition with innovation. Ideal for both seasoned creators and passionate hobbyists, Simple Touch is your shortcut to prototype, experiment, and elevate your designs. Embrace the power of touch with Simple Touch, and transform your creative impulses into extraordinary musical inventions today.Features:• Programmable. All Simple kits come with the Daisy Seed microcontroller and access to our introduction to synth programming video course.• Open source instrument on Github.• Each kit comes with a video course teaching sound fundamentals: https://learn.synthux.academy/• Powerful music instrument for live performances.DIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.
only 1 left
Possible applications of the Jedoniañ include using a Hz/V synth as a CV keyboard for your Eurorack or vice versa – converting voltages from a 1V/oct MIDI/CV interface to the Hz/V scale and so on. The upper section converts from 1V/octave to Hz/V and V-Trig to S-Trig. The lower unit converts from Hz/V to 1V/octave and S-Trig to V-Trig.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.