Various Tools

MEX, is a gate expander for Muxlicer! It adds a new line of gates to Muxlicer’s sequence, where you can choose to turn off the step, output same number of gates as muxlicer, or sending just one. A very simple concept, that provides great flexibilty! And greatest thing: you can daisy chain them so you can add as many as desired!Features:• Extra 8-Step Gate Sequencer for Muxlicer• Three modes of operation selectable per step.• Several units can be daisy-chained to create entire sets of different patterns.• Powered directly from the Muxlicer.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.

Morphader is a performative tool designed to make multichannel CV/Audio crossfade easy and comfortable. Fading from one quad CV/audio scene to another. The core of the module has four CV controlled crossfaders, each with their individual control and a master fader to control them all. The module mixes the four crossfades at its fourth output, thanks to a clever normalization scheme. Each of them can be easily removed from the mix by plugging a cable at its own output.Features:• CV Controlled four channel crossfader.• Attenuators per input.• Normalized voltages to every input, allowing cv levels morphing.• Audio CV response switch per channel• Master Fader control with Lag.• Leds per channel for signal level monitoring.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.

Muxlicer is a sequential signal processor designed for add a huge range of special functions to your modular setup in the minimum space.Is divided in three main blocks: a Digital Step Controller, a Gate Generator and an Analog Switch (a.k.a. Mux/DeMux)The module is designed with high “function to HP ratio” philosophy , to have maximum flexibility in minimum space.An analog switch is a device capable of switching or routing analog signals. In the case of Muxlicer, the switch is reversible, so you can send 8 different signals to 1 destination and viceversa.Through Common I/O you can either send a signal to the Mux I/Os or receive a signal from them. (Depending on how the module is connected). It is also used as CV Out when nothing is connected to “All In” or “Mux I/Os”. The eight Mux I/Os are normalled to “All In” jack, so any signal present at this input will go to all of them.Imagine you want to send a signal to steps 1,2,4,5,6 and 8 and two more signals to 3 and 7 respectively. You just need three wires for this: plug the first one to All In and the other two to 3 and 7 Mux I/Os and you are done!Features:• Route any modular signal from one IN up to eight different Outs or vice versa.• Generate CV and Gate signals, been able to work as sequential voltage source a.k.a. sequencer.• Cut audio signals in rhythmical slices with independent volume.• Generate complex and dynamic patterns from any audio or modulation signal.• Create powerful Gate sequences with control voltage retriggering for each step.• Select easily when your signals act on your patch with the Address function.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.

Our new Output Module is designed to be the master output for your modular system, providing balanced outputs, dedicated headphone amplifier and an extra Cue Input to monitor any signal.Left IN is routed to both channels when no Right signal is present. Both Outputs are TRS balanced.A Headphones out is available. You can route Headphone OUT to the main out or an independent signal with CUE switch. Like this you can either pre-listen your sounds with the CUE Input or listen to your main out without disturbing your neighbors!Level leds are available to monitor levels of each signal on the module.Features:• 6.5mm TRS Balanced Outputs• 6.5mm TRS Headphone Output• LED signal monitoring for each Input.• Selectable signal monitoring at Headphone OutputDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.

Power your pedals directly from your Eurorackcase with Pedal POW – a compact dual power supply that delivers two isolated 9 V outputs, each capable of supplying up to 500 mA to run your stompboxes reliably on stage or in the studio.Pedal POW converts your Eurorack +12 V rail to clean 9 V pedal power while sharing the available energy with your modular synth. Because Pedal POW depends on your Eurorack power supply, its total available power cannot exceed what your Eurorack PSU can provide. Make sure your Eurorack power supply has enough headroom to run all installed modules plus anything you connect to Pedal POW.Each Pedal POW output can supply a maximum of 500 mA. Keep in mind the conversion draw: every 1 mA delivered by Pedal POW draws approximately 0.8 mA from the +12 V rail. For example, to deliver the full 500 mA on one output you must provide 500 mA × 0.8 = 400 mA from the +12 V rail. If both outputs are used at their maximum, the pedals would draw 500 mA + 500 mA = 1000 mA, which corresponds to 1000 mA × 0.8 = 800 mA from your +12 V bus.Before connecting multiple high-current pedals, verify your Eurorack power budget and factor in the Pedal POW conversion rate. Use the product’s reference table or this conversion rule (1 mA at Pedal POW ≈ 0.8 mA from +12 V) to quickly calculate how much current you need from your Eurorack supply so you can avoid overloading the system and keep your rig stable.Features:• 1U Intellijel format• Dual power supply with two isolated outputs, each providing 500 mA• Center negative (-) polarityDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.

Pedal S-R is the perfect stereo interface for integrating external effects into your Eurorack system. This compact stereo pedal insert adapts hot modular signal levels to the levels and impedance required by stereo or mono stompboxes, pedals and outboard gear, making it simple to route modular sounds through your favorite effects.The Sends section attenuates typical Eurorack signals (≈10 Vpp) down to usable line or instrument levels so pedals behave as intended and clipping is avoided. The Returns section includes a dedicated volume control to blend processed signal back into the modular at a comfortable level, keeping your patch balanced and musical.Pedal S-R also features a Hi-Z switch that lets you select between standard and high-impedance inputs. Flip it when connecting pedals or effects that expect a guitar amp or passive pickups to preserve tone, dynamics and clarity.Features:• Fully compatible with Befaco 7U Case and Intellijel 7U and Palette cases rear Jack connectors• 1U Intellijel format• HI Z switch• Full control over the relationship between your modular system and external pedals or effects unitsDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.

Percall is a percussive oriented module that will shape four different sound sources into percussive sounds. Percall has four VCAs with dedicated decay envelopes and a mixer, so you can prepare a percussion submix. Added strength input will provide extra dynamics to the sounds! To round up the module, audio inputs are normaled from one to two and from three to four, spicing them up with choke control. This allow to create open and closed Hats or kind of side-chained baselines with your kick.Features:• Four VCAs with dedicated decay envelope.• CV control over envelope decays.• Individual outputs for each envelope• Volume control per channel and normaled Mix out.• Strenght input affecting all four channels.• Audio Input 1 normaled to Input 2. Audio input 3 normaled to input 4.• Choke contrrols, binding Channel one with two and three with four.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.

Vinyl culture and modular synths come together in a high-fidelity phono stage built for Eurorack. This compact module brings turntables into the modular domain, letting you run hybrid DJ sets, add scratching and turntablism techniques to patches or simply enjoy your favorite records with true analog warmth.A high-gain amplifier offers selectable RIAA and LINE IN modes plus a ground bonding post to eliminate hum. The stage accepts all common MM cartridges and delivers the gain needed to match vinyl playback to modular levels, preserving dynamics and tonal character.Top-mounted, high-quality RCA connectors make setup and operation fast and hassle-free, keeping cables tidy and accessible during performance. Use this phono stage to integrate turntable textures into modular sound design, expand live sets with vinyl elements or add authentic record playback to the studio.Features:• High-quality RCA connectors• Ground connection for old-school turntables with bidding posts• Hi-gain amplifier with selectable RIAA and LINE INs, and a ground binding post• Accepts all kinds of MM cartridgesDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.

An accurate voltage source and precision adder. Voltio fits somewhere between a music tool and a piece of electronics lab gear.It generates voltages equivalent to all the notes on the 12-tone equal temperament scale throughout a ten-octave range, with an intuitive two-knob interface.The Precision Adder In, lets you sum Voltio’s Out with external voltages.Additionally, the front panel banana connectors let you plug standard multimeter probes for hands-free operation on electronics lab.Use it to transpose Oscillators and sequences in a musical way or as a reference to calibrate your analog gear.Features:• Easily adjust your oscillators in known intervals.• Transpose Musical phrases from sequencers, arpeggiators, or any other notes source.• Calibrate oscillators and filters on your DIY projects or during analog gear maintenance.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.

The Mutes mk2, developed in collaboration with Ben Wilson (aka DivKid), is a powerful upgrade to the original performance muting module. Now using VCA-based technology, it delivers improved signal integrity, reduced noise floor, and zero bleed, while preserving the smooth, vactrol-style response. Each channel features a performative three-way switch (momentary–off–on), perfect for live dub-style FX routing and dynamic signal control. Mutes Mk2 enables signal splitting to multiple destinations, expanding your modular performance possibilities. This updated version includes both a standard 3U panel and an additional Intellijel-format 1U panel, allowing for versatile mounting in various Eurorack setups.Features:• LEDs to visualise signals• 3 way momentary – off – on switching• Buffered and cascading normalising of inputs• Black metal panel• VCA based mutingDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.

Motion MTR allow you to mix, attenuate and invert signals while having clear visual feedback of their levels.Each channel can function as:• Audio level control with VU meter• CV attenuator with voltage meter• CV inverter with voltage meterEach input is normalled to 10v, so you can use each of them to generate fixed voltages. Also, the outputs of channels 1 and 2 are summed into Out 3 to be used as a mixer. Patch it wildly to make it work as an attenuverter with offset, as a mixer, a VU meter or a combination of them all!This module is designed in collaboration with Robin Vincent from Molten Modular.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.

This is the 1U version of the module, for the 3U standard version please check the other product!Motion MTR allow you to mix, attenuate and invert signals while having clear visual feedback of their levels.Each channel can function as:• Audio level control with VU meter• CV attenuator with voltage meter• CV inverter with voltage meterEach input is normalled to 10v, so you can use each of them to generate fixed voltages. Also, the outputs of channels 1, 2 and 3 are summed into Out 4 to be used as a mixPatch it wildly to make it work as an attenuverter with offset, as a mixer, a VU meter or a combination of them all!This module is designed in collaboration with Robin Vincent from Molten Modular.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.

Cosmos is a new kind of module that will help you to creating complex modulation, sounds, patterns with ease and will lead you to new sounds territories.Inspired by early analog computers, Cosmos is a unique, innovative, very flexible and fully analog module allowing it to be used as: VCO, LFO, Ring Mod, Polarizer, “VCA”, “LPG”, Phase Lock Loop, Cross-Modulation, Minimum, Maximum, Logic Gates, Waveshaper, Complex gate generator, Fuzz, Distorsion, Gate extractor, Trig extractor, Gate generator, Voltage generator, Trig Generator, comparator, window comparator, complex comparator, Half-Rectifier, Full-Rectifier, Inverter, Buffered Multiples, Mixer, Difference, Compressor, Sidechain, compressor, VC Clipper, VC Switch, Clock doubler, Envelope follower, and more.With its wide fields of application Cosmos can replace many modules but it will also bring new colors to your palette thanks to its unique character. This makes Cosmos the ideal module whether you have a small case or a big system. 100% analog and with an intuitive interface Cosmos is also very easy to use, no menu and button combo problems.Inspired by the past and crafted for the future, 100% analog Cosmos was not only thought to be the center of any system but also to blend perfectly with the rest of your case to form a consistent and coherent system.Cosmos was designed not only to be a swiss army knife module but also to push you to explore and you help create new sounds and explore sonic territories that were previously unattainable.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.

Dual Rectifier II is a small yet versatile and essential module for any Eurorack system. It can be used as an AC to DC converter, a distorsion, a complex waveform generator, a frequency doubler, a clock doubler or an envelope follower and more.Like all our modules, Dual Rectifier II is built with high-quality components only and designed to offer the best performance.Whether you're starting a small system or have a wall full of modules, Dual Rectifier II is a must-have for any Eurorack system.DUAL RECTIFIER II is divided into two sections:On top section the Positive Rectifier offer 1 input and 3 outputs :-Output 1 is an Inverted copy of input 1.-Output 2 Half-rectified, signal from input 1 below 0V will be remove.-Output 3 Full-rectified, signal from input 1 below 0V will be rectified.On bottom section the Negative Rectifier offer 1 input and 3 outputs :-Output 1 is an Inverted copy of input 2.-Output 2 Half-rectified, signal from input 2 above 0V will be remove.-Output 3 Full-rectified, signal from input 2 above 0V will be rectified.By default input 2 is normaled to output 1 (inverted) of the top section.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.

GOMA II is our new take on the classic attenuvertermixer concept. It stands for Generator, Offset, Mixer, Attenuverter.Featuring 4 channels within a 4HP width, GOMA II pushes the boundaries of space efficiency, maintaining intuitive operation and high-end components for max precision (low tolerance resistors, low noise/distortion opamps).GOMA II offers 4 channels to attenuate or polarize (attenuverter) any audio or CV signal. Additionally, each channel can act as a high precision voltage generator (–5V to +5V) to offset another channel or control external parameters.The 4 channels can be processed separately or summed through cascade mixing, which can extend further than a single module since all the GOMA family (I, II, Pro) can be daisy chained to unlock virtually infinite mixing.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.

The GOMA Pro pushes the boundaries of the attenuverter-mixer concept.Attenuator, attenuverter, offset generator, voltage generator, waveshaper, distorsion, GOMA Pro can do all of that and more. Engineered for precision, GOMA Pro is crafted using high-quality components to ensure maximum accuracy, including low-tolerance resistors and low-noise op-amps.GOMA Pro offers 3 channels fully analog to amplify (up to x10 gain!), attenuate or polarize (attenuverter) any signal, from CV, audio to line level sources.Additionally, each channel can act as a high precision voltage generator (–10V to +10V) to offset another channel or control external parameters.The 3 channels can be processed separately or summed through cascade mixing, which can extend further than a single module since all the GOMA family (I, II, Pro) can be daisy chained to unlock virtually infinite mixing.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.

The idea behind QBI is to fulfill two fundamental functions when patching:• Duplicate a signal• Invert a signalThese are two basic yet important and essential functions when patching. But even though they are important, we wanted them to take up as little space as possible.Therefore we imagined QBI, a module of only 2HP capable of:• Invert 4 different signals with very high precision.• Duplicate a signal on 3 outputs without losses.• Duplicate and invert a signal on 4 outputs without losses.And the best of all is that you can add these different functions together to always meet your needs when patching.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.

The idea behind QBI is to fulfill two fundamental functions when patching:• Duplicate a signal• Invert a signalThese are two basic yet important and essential functions when patching. But even though they are important, we wanted them to take up as little space as possible.Therefore we imagined QBI, a module of only 2HP capable of:• Invert 4 different signals with very high precision.• Duplicate a signal on 3 outputs without losses.• Duplicate and invert a signal on 4 outputs without losses.And the best of all is that you can add these different functions together to always meet your needs when patching.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.

Voltage Processor is designed to pack a lot of features in a small module.Here a some of the features you can achieve with Voltage Processor. You can find how to setup those features in the manual below.Features:• Dual VCA• Stereo VCA• CV Crossfader 2:1• CV Crossfader 1:2• Dual AM• CV PAN• Dual Attenuator• Dual Inverter• Dual Offset generator• Dual Voltage generator• Dual Exponential converter• Logarithmic converter• Dual PWM• Dual CV overdrive• Dual waveshaper• Complex waveshaper• Dual RingMod• RindMod• Compressor• Sidechain compressorDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.

The Dannysound VU Meters is designed to be used with 2 x Dynamics modules. The modules connect internally via 2x3 pin ribbon cables.The meters provide a visual representation of various signals within the Dynamics modules making settings easier.Controls For Each Channel:3 position toggle switch:1. C/E OUT – Monitor compressor/expander output.2. INPUT – Monitor Dynamics input level or external input if it’s used.3. C/E AMT – Monitor Dynamics compression/expansion amount.3 position toggle switch:1. HI SENS – High sensitivity setting, best for monitoring the C/E OUT signal of percussive sounds and drums etc.2. OFF – If you want to turn meters off. Note that this stops the needles moving but the backlights will stay on.3. LO SENS – Low sensitivity setting, best for monitoring the C/E AMT signal or anything that overloads the HI SENS setting.Features:• External input sockets for monitoring external sources.• Switch to select high or low meter sensitivity or off if the clicking needles get annoying!• Monitoring of the compression/expansion amount.• Monitoring of the unprocessed input level.• Monitoring of the compressor/expander output level.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.