Case
only 1 left
Sinusoda power bricks are available as 60 W for smaller setups and 96 W for bigger setups.60 W Brick is the recommended power brick for a single Juice & Bubbles unit. It comes as the standard brick with all our products. More information at https://sinusoda.comThe plug is 5,5 mm outside, 2,5 mm inside, center positive (Barrel 5,5/2,5).DIY-Kit-Type:Assembled unit. This is completely ready to use, nothing to solder or to assemble.
sold out at the moment
Sinusoda power bricks are available as 60 W for smaller setups and 96 W for bigger setups.60 W Brick is the recommended power brick for a single Juice & Bubbles unit. It comes as the standard brick with all our products. More information at https://sinusoda.comThe plug is 5,5 mm outside, 2,5 mm inside, center positive (Barrel 5,5/2,5).DIY-Kit-Type:Assembled unit. This is completely ready to use, nothing to solder or to assemble.
sold out at the moment
Sinusoda - Slim Can (1U, 52HP) - Black (unassembled)The Slim Can is Sinusoda’s 1U 52 HP expansion that can be mounted together with The Can. It’s made to fit Intellijel format 1U modules. Comes in parts and ready for self-assembly. Vertical connectors included for easy expansion.You can connect any amount of Sinusoda’s Empty Cans or Slim Cans to add more HP to this case.It’s meant as an expander so it comes without the side blinders.For more information on the Sinusoda modular casing system visit the Sinusoda Website.Features:Dimensions: 328 x 46 x 85 mmCase Depth: 70 mmWeight: 0,32 kg (no power brick included)
only 1 left
Sinusoda - The Can (3U, 52HP, Juice, Straw, 60W Brick) - Black (unassembled)The Can is Sinusoda’s 3U 52 HP case that comes with Juice Powerboard, Straw power inlet and 60W power brick. Comes in parts and ready for self-assembly. Additional vertical and horizontal connectors of the casing system included. It’s a starting point for a truly modular case for modular synths.You can connect any amount of Sinusoda’s Empty Cans to add more HP to this case.Juice Powerboard is Sinusoda’s Ultra Low Noise power supply solution offering up to +12v: 3A / -12v: 1.5A / +5v: 2A of clean power for your synths. Several Juices can be connected together in series for more power.Straw power inlet has a USB charging port for your mobile devices, midi devices or lamps.Side blinds can be cut into blank panels revealing more space - additional 4 hp from the top on both sides, and up to 14 hp from the sideway mount.For more information on the Sinusoda modular casing system visit the Sinusoda Website.Features:Dimensions: 325 x 130 x 85 mmCase depth: 70 mm without powerboard, and 56 mm with powerboardWeight: 0,9 kg (power brick included)
only 1 left
Sinusoda - The Can (3U, 52HP, Juice, Straw, 60W Brick) - Grey (unassembled)The Can is Sinusoda’s 3U 52 HP case that comes with Juice Powerboard, Straw power inlet and 60W power brick. Comes in parts and ready for self-assembly. Additional vertical and horizontal connectors of the casing system included. It’s a starting point for a truly modular case for modular synths.You can connect any amount of Sinusoda’s Empty Cans to add more HP to this case.Juice Powerboard is Sinusoda’s Ultra Low Noise power supply solution offering up to +12v: 3A / -12v: 1.5A / +5v: 2A of clean power for your synths. Several Juices can be connected together in series for more power.Straw power inlet has a USB charging port for your mobile devices, midi devices or lamps.Side blinds can be cut into blank panels revealing more space - additional 4 hp from the top on both sides, and up to 14 hp from the sideway mount.For more information on the Sinusoda modular casing system visit the Sinusoda Website.Features:Dimensions: 325 x 130 x 85 mmCase depth: 70 mm without powerboard, and 56 mm with powerboardWeight: 0,9 kg (power brick included)
sold out at the moment
The Can Lite is Sinusoda’s 3U 52 HP case that comes with Juice Lite Powerboard and 35W power brick. Additional vertical and horizontal connectors of the casing system included. It’s a starting point for a truly modular case for modular synths.You can connect any amount of Sinusoda’s Empty Cans or Slim Cans to add more HP to this case.Juice Lite Powerboard is Sinusoda’s Ultra Low Noise power supply solution offering up to +12V @ 2A, -12V @ 0.8A, +5V @ 1.5A of clean power for your synths. It comes with 12 headers for Eurorack modules and cannot be expanded further - it is mostly meant to power single cans at a much better price point.Side blinds can be cut into blank panels revealing more space - additional 4 HP from the top on both sides, and up to 14 hp from the sideway mount.For more information on the Sinusoda modular casing system visit the Sinusoda Website.Features:Dimensions: 325x130x85mmCase depth: 70 mm without Powerboard, and 56 mm with PowerboardCase weight: 1,65 kg (power brick included)
sold out at the moment
Sinusoda - Two Pack Slim Can (1U, 104 HP) - Black (unassembled)The Two Pack Slim is Sinusoda’s 1U 104 HP expansion that can be mounted together with Four Pack. It’s made to fit Intellijel format 1U modules. Comes in parts and ready for self-assembly. Vertical connectors included for easy expansion.You can connect any amount of Sinusoda’s Empty Cans or Slim Cans to add more HP to this case.Features:Dimensions: 592 x 46 x 85 mmDepth: 70 mmWeight: 0,552 kg (no power brick included)
available
M3 threaded strip for Eurorack rails and electronic enclosure systems.The strip provides fixed M3 mounting points at the standard 5.08 mm spacing used for Eurorack modules. It slides into all Tech Creation Lab rail profiles and offers a simple alternative to individual sliding nuts.Available in several lengths for different Eurorack case sizes.Eurorack Threaded StripA threaded strip sits inside the mounting rail of a Eurorack case and provides the threads used to secure modules with M3 screws.Unlike sliding nuts, the mounting points remain evenly spaced along the entire rail. The 5.08 mm spacing corresponds to the standard 1 HP Eurorack grid.Ettinger Threaded Strip AlternativeExploding Shed previously supplied Ettinger M3 threaded strips for our Eurorack rail systems.Our threaded strips are manufactured specifically for Tech Creation Lab and are designed for the same M3 mounting applications with 5.08 mm spacing as strips from other manufacturers, such as Ettinger.Our current M3 threaded strips are a direct replacement for the Ettinger threaded strips previously supplied and can be used in their place.Threaded Strips or Sliding Nuts?Both systems are commonly used in Eurorack cases. Threaded strips provide fixed M3 mounting points at 5.08 mm intervals along the entire rail. Sliding nuts move freely inside the rail and can be positioned individually.Threaded strips are generally quicker to use when installing or rearranging several modules, while sliding nuts allow completely free screw positioning.Features• M3 threaded strip• 5.08 mm thread spacing• Made for Eurorack mounting rails• Fixed mounting points along the entire rail• Suitable for Eurorack cases and electronic enclosures• Available in multiple HP lengths
sold out at the moment
This small board is designed for you to easily power your breadboard with the common Eurorack voltages - directly from the bus in your case. The kit includes the PCB and all the parts necessary to supply voltages of -12V, + 12V and + 5V into your breadboard and it is possible to power the board from a 10 or 16 pin ribbon cable. In addition to reverse polarity protection diodes and power filtering capacitors, a point of connection to ground has been also added to solder a terminal to connect an oscilloscope or multimeter.Please be aware that there are multiple types of breadboards. This kit is designed to fit on 48 mm Breadboard!If you can't find a build guide, please email Transient Modules!DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.