Sound Sources
only 2 left
The Arkarion is a full-featured analog synthesizer voice in Eurorack format, designed for creative exploration and dynamic signal flow. Combining the warmth of analog circuitry with a digitally controlled internal routing system, Arkarion offers a unique blend of structure and unpredictability. It's an expressive, performance-ready instrument for musicians seeking deep modulation, generative possibilities, and hands-on control.At the core of Arkarion lies a digitally interpreted “DNA patch system” — a signal-routing framework inspired by genetic code. This system unlocks over 65,000 modulation and audio paths, allowing for rich, morphing textures that evolve at the press of a button or incoming gate.Features:• Complete analog synthesizer voice with digital routing control• 2 analog VCOs with selectable waveforms• MIDI input with pitch CV and gate outputs• Envelope generator with rise/fall stages, loop and gated loop modes• 2 CV-controllable LFOs for versatile modulation• Gate-triggered random voltage source• Multimode filter: lowpass, bandpass, highpass, allpass (switchable)• Tape-style analog delay with CV control• Digitally controlled “Gene Modification” knob for live routing mutation• 16-bit routing architecture: 65,536 possible patch configurations• 64 patch memory slots (8 banks of 8 presets)• Internal VCAs for modulation depth control• Randomize routing via button or external gate input• LED indicators visualize current patch structure and modulation pathsDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
only 1 left
The CubuSynth Engine is a dual analog VCO with wave shaping functions, internal modulations and a chaos generator. It is based around the 3340 chip and features 4 Waveforms + Wavefolder per VCO and 4 Modulated Outputs, all simultaneously.The CubuSynth Engine can work as 2 independent VCOs, or as one complex FM oscillator. With its inernal "Chaos Engine" it creates semi-random voltages, generated by the 2 oscillator cores. This signal is then normalized to the CV inputs for Pulse width modulation and exponential FM. Each of the 2 VCOs offers a switch to select one of the 4 waveshapes to be used by thewavefolders, and the linear FM input normalisations.Features:• 2 VCO cores (voices)• 4 simultaneous wave forms per voice + 4 Modulation Outputs• Wavefolder per voice• Pulse Width modulation• Linear and exponential FM inputs• 1 V/oct tracking stable over up to 10 octaves• Chaos generator with external clock input• Complex internal normalized modulationsDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
only 2 left
The Exhaust adds many features to your Engine VCO module like Sub-octaves, Mixing and a Gate generated by the Chaos signal.You can select one of the two VCO cores of the engine to produce square waves one and two octaves below the oscillators frequency. You can blend between -1 and -2 octaves and set the volume they are mixed into the main “Mix” output.The knobs “VCO1” “VCO2” and “AM” set the level of the selected waveform of each VCO and the AM output from the Engine to the main mix. The “Ext In” input is normalled from the RM output, but you can plug in any other signal to go to the main mix. The V Ref sets a Voltage between 0V and +10V which compares against the chaos signal from the Engine (Chaos attenuator on the Engine doesn't matter). Whenever the chaos signal is higher in voltage than the knob setting, it will give you a gate or trigger signal depending on the switch. There is also a CV input, which offsets your V Ref and can create interesting rhythms.Features:• Two sub-ocatve generator with selection switch, mix knob for -1 and -2 octaves (/2 and /4)• 5 channel audio mixer for 4 different outputs from the Engine and the sub-octave generator• External input for mixing with other signals• Semi-random gate or trigger output generated by the chaos signal• Audio-optimized chaos output• Separate outputs for sub-octave and main mixDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
only 2 left
The Cali oscillator is a new and improved version of the classic Buchla 258 wave shaping oscillator with an additional pulse width modulated output.The oscillator features the classic Sine to Square and Sine to Saw wave shaping with dedicated CV control.The Cali Oscillator differs from previous versions of the 258 in that it has a 3-way position switch rather than 2-way.This new middle position features a bonus waveform that will shape from a pulse into a kind of triangular trapezoid shape.The shaping control is more unpredictable in this middle position and the switch reacts to body contact when the wave shape is set low – it can bethought of as an extra bonus waveform, great for producing glitchy sounds! There are dedicated inputs for linear and logarithmic FM and the Cali alsoadds a Pulse output with it’s own width control and PWM CV input.The behaviour of the pulse output can be affected by the position of the waveform switch and wave shape control.The module features Coarse and Fine frequency controls and an LFO mode, LFO range is accessed via an LED pushbutton that alsoacts as the LFO speed indicator – the button will light up when the waveform moves through its positive cycle.Because the wave shape modulation is independent of pitch this oscillator is very useful for creating complex timbres whilst retaining musical pitch.Features:• Sine to Saw/Square Waveform Output with CV over wave shaping• Pulse output with voltage controlled PWM• Linear FM with attenuator• Logarithmic FM with attenuator• Bonus ‘trapezoid’ output• Coarse & Fine controls with LFO mode• Includes power supply isolation on frequency controlsDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
The EN129 Thru Zero Oscillator is an all analogue triangle-core VCO specialising in frequency modulation.Analogue through-zero FM modulation produces a wide array of timbres particularly useful for bell like or percussive sounds.Through zero linear frequency modulation can be precisely dialled in thanks to a dedicated CV input attenuator and through zero offset control.Logarithmic FM is also available via it’s own dedicated input with attenuator and both FM inputs have an LED to indicate incoming voltages.Simultaneous analogue wave outputs include: Sine, Triangle, Sawtooth, Square and Pulse wave with Pulse Width Modulation.The PWM control goes to zero at either end of it’s range, which is very useful for creating rhythmic sounds with voltage control.Furthermore the PWM control doubles up as wave shape modulation for the Sawtooth wave – gradually altering the waveform until it shifts half a cycle.The EN129 features Coarse and Fine frequency controls as well as an LFO mode. LFO range is accessed via an LED pushbutton that alsoacts as the LFO speed indicator – the button will light up when the waveform moves through its positive cycle.A new addition of a Soft Sync Input allows the phase of the oscillator to be controlled by an external oscillator for an even greater range of timbres.Features:• Soft Sync Input• Thru Zero linear FM• Logarithmic FM• Zero to zero pulse width modulation• Sawtooth wave shape modulation• Simultaneous outputs for: Sine, Triangle, Saw, Pulse & Square• Coarse & Fine controls with LFO mode• Includes power supply isolation on frequency controlsDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
EDU DIY Output Mixer 2 is an intermediate-level learning kit from the mki x es.EDU Drums System, created by Erica Synths and Moritz Klein. It teaches you how to build and understand a 4-channel Eurorack output mixer from scratch, starting on a breadboard and ending as a fully functional Eurorack module using the included PCB and panel.The circuit covers essential analog audio building blocks, including an inverting op-amp summing mixer, per-channel volume controls, a send/return loop, diode soft-clipping distortion and a headphone driver. The detailed illustrated manual explains each stage with clear diagrams and analogies, making the kit a practical way to learn how mixers, distortion circuits and headphone outputs work.Once assembled, EDU DIY Output Mixer 2 provides four input channels with individual level controls, per-channel sends, a return control, a variable distortion insert effect, plus line and headphone outputs. It is designed as a hands-on educational project for builders with basic electronics knowledge and previous DIY experience.All small components for the breadboard build are included, together with the Eurorack PCB, panel, power cable and a 40+ page digital manual. A breadboard, jumpers and a dual power supply are required separately. For a smoother learning experience, the kit can also be used with Labor, Erica Synths’ dedicated prototyping platform for EDU DIY learning kits.Features• Part of the mki x es.EDU Drums System by Erica Synths and Moritz Klein.• Breadboard learning build plus final Eurorack PCB and panel.• Four input channels with individual volume controls.• Send/return loop with per-channel send and return control.• Variable diode soft-clipping distortion.• Line output and headphone output.• Teaches op-amp summing, mixing, distortion and headphone driver design.DIY-Kit-TypeTHT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
only 2 left
This DIY module brings FM percussion to your Eurorack system, combining the raw power of analog circuits with the sharp, metallic tones of FM synthesis. From punchy kicks and deep toms to clangy, metallic hits, the mki x es.EDU FM Drum covers a wide range of percussive textures.Developed by Erica Synths and Moritz Klein as part of the educational mki x es.EDU series, this kit is designed not just for building, but for learning. It’s aimed at beginners and curious makers who want to understand analog synth design from the ground up.More than just a soldering project, this kit walks you through the full design process, explaining how each part of the circuit works and how sound is shaped, step by step.Features:• DIY FM drum voice – from kicks and toms to metallic clangs• Combines analog synthesis with FM-style sound shaping• Educational kit designed for beginners and learners• Part of the mki x es.EDU series by Erica Synths & Moritz Klein• Detailed build guide with circuit design explanations included• Inspires hands-on learning and deeper understanding of analog soundDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
only 2 left
Synthesized, analog Hi-Hats are pretty fascinating. That’s because emulating any kind of cymbal using an analog circuit is tough since the sound a real cymbal produces is not quite pure noise, but also not really harmonic. Still, a couple of classic drum machines like the Roland TR-606 and TR-808 took their best shot at it, with quite strange-sounding results that have since become iconic in electronic music. Inspired by this, we decided to follow suit and continue our percussion-focused second season of educational DIY kits with the mki x es.edu DIY Hi-Hats.FeaturesFeatures:• TR-808 inspired circuit• Manual Tune, Decay and Tone controls• CV controlled Tune and Decay (-5V to +5V)• Accent input (>+2,5V)We – Erica Synths and Moritz Klein – have developed a series of educational DIY kits under the brand name mki x es.EDU with one specific goal in mind: to teach people with little-to-no prior experience how to design analog synthesizer circuits from scratch. What you’ll find in the box is not simply meant to be soldered together and then disappear in your rack. Instead, we want to take you through the circuit design process step by step, explaining every choice we’ve made and how it impacts the finished module.NB! All kits in these series are simple and come with extensive user manuals that can be downloaded separately, therefore we will not provide customer support in case your DIY build fails to function or similar.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
This is the Full Kit with a wide assortment of essential components (resistors, capacitors, ICs, transistors) so you can start building right away.Get started in circuit design with MKI x ES Labor. Developed in collaboration with Dr. Shalom D. Ruben teaching professor for engineering at the University of Colorado Labor is a fully-featured circuit design playground and a powerful electronics learning tool all in one. Created with the aim of serving as a universal learning tool for electronics engineering Labor enables users to delve into various aspects of electronics design from fundamental concepts to advanced techniques. Whether you're a beginner exploring the basics or an experienced engineer honing your skills Labor provides a versatile platform for experimentation and learning. Create your own filters oscillators envelopes sequencers – and whatever else you can come up with. Or use it to learn the basics by following along with our series of educational DIY kits.Features:• a built in dual power supply producing eurorack-compatible voltages, with built-in over current protection for safe experimenting• a modular interfacing section with 16 slots for potentiometers, jacks & switches• a pulse/triangle/sine oscillator (audio & LFO range)• a multi mode envelope generator controlled by a premium push button• a buffered variable control voltage source• an output amplifier with variable gain• a dedicated headphone output and a line-level output for recording, processing and analyzing the signal• an expansion slot for installing specialized prototyping tools• a protective lid to cover a breadboard.EDU DIY Labor Full Kit includes:• LABOR• Power Supply Unit• jumper cables• array of interfacing elements like potentiometers, jack sockets, switches• commonly used components (resistors, capacitors, chips, transistors) to start building circuits straight awayNB! LABOR is a testing ground for experiments with electronic circuits and we as a manufacturer cannot by any means diagnose any issues with circuits designed on the LABOR board. We will only respond to support tickets regarding obvious malfunctions of the factory-soldered circuits on the main LABOR board. For other cases of malfunction – please consult other LABOR users/ experienced DIY kit builders on online forums, such as this one. Keep experimenting – keep trying!DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
available
Whether you use it for self-sequencing, for adding a dash of randomness to your filter movements, or for rough analog bitcrushing, a sample & hold-circuit can often be the secret sauce that takes your patch from decent to distinctive. That’s why we came up with this super simple JFET-based implementation – and then upgraded it with a couple of extra features like an internal clock generator or a dedicated slew output. Of course, we’ll need an interesting input to sample – which is why you’ll often find sample & hold modules with an integrated noise generator. So we’ll do the same! But instead of just one noise color, we’ll throw in two extra: pink and blue in addition to the standard white noise.We – Erica Synths and Moritz Klein – have developed a series of educational DIY kits under the brand name mki x es.EDU with one specific goal in mind: to teach people with little-to-no prior experience how to design analog synthesizer circuits from scratch. What you’ll find in the box is not simply meant to be soldered together and then disappear in your rack. Instead, we want to take you through the circuit design process step by step, explaining every choice we’ve made and how it impacts the finished module.In total, we have developed 9 kits to build a fully-featured modular monosynth: a sequencer, a VCO, a wavefolder, a noise/S&H module, a mixer, a VCF, an Envelope generator, a dual VCA, and an output stereo mixer with a headphone amplifier. Additionally, an affordable eurorack case with a DIY PSU will also be available. While these kits are easy to build, we did not compromise on design and functionality. We will launch one kit every 4-6 weeks. For each kit, there is an extensive user manual (40+ pages; can be downloaded separately) that will dive deep into not only the electronics behind each circuit but also the fundamental principles of sound synthesis. We hope that the mki x es.EDU project will inspire future engineers and will contribute to the ever-growing diversity of electronic music technology.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
only 1 left
No drum machine is really complete without a punchy, snappy Snare Drum. Together with the Kick, it creates the rhythmic backbone for most grooves. So for our percussion-focused second season of educational DIY kits, we knew we had to come up with a Snare circuit that would complement the Kick and Hi-Hat we’ve already released. After a lot of fine tuning, here’s what we came up with: introducing mki x es.edu DIY Snare Drum.Features:• Manual and CV controlled Tune• Tune CV depth attenuator• Manual Attack and Decay control• Manual and CV Snappy (noise and tone crossfade) control• Accent inputWe - Erica Synths and Moritz Klein – have developed a series of educational DIY kits under the brand name mki x es.EDU with one specific goal in mind: to teach people with little-to-no prior experience how to design analog synthesizer circuits from scratch. What you’ll find in the box is not simply meant to be soldered together and then disappear in your rack. Instead, we want to take you through the circuit design process step by step, explaining every choice we’ve made and how it impacts the finished module.NB! All kits in these series are simple and come with extensive user manuals which can be downloaded separately, therefore we will not provide customer support in case your DIY build fails to function or similar.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
only 2 left
This is an easy to build VCO with a really extensive documentation and explanation of the circuit. Excellent learning kit!The mki x es.EDU VCO is the first educational DIY kit in this series. It is an analog sawtooth-core oscillator with a reasonably accurate volt/octave tracking, made from just a handful of basic components. It features sawtooth and pulse outputs as well as 1V/oct, FM, and PWM inputs.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
Pikocore XL is a Raspberry Pi–powered lo-fi music mangler originally developed by Zack Scholl.The Picocore has been reimagined by Erica Synths with a more playable, performance-ready design. The original Pikocore started life as a tiny pocket-calculator DIY device; Erica Synths worked with Zack to preserve the same functionality while giving it their signature hands-on interface and a sturdy aluminum enclosure.Features:• a lo-fi music mangler based on the Raspberry Pi Pico (brother of the nyblcore).• capable of holding 8 minutes of 8-bit 33 kHz monophonic samples.• powered by a single alkaline AAA battery for up to 3 hours or by powered by USB-C.• tempo-synced with a selectable BPM between 60 and 300, with samples mangled by beat-synced effects (stutter, retrig, gate, tunneling).• loaded with real-time effects like a resonant filter, timestretching, volume, and wavefolding.• sequenced with a 128-step sequencer with recording/playback• saved and loaded via EEPROM for instant patch recall.• able to load custom firmware, new samples, all through USB-C.• sync-compatible with Pocket Operators.• open-source, wonderfully hackable.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
available
It's christmas time in your modular rack and this year we invented a proper christmas tree module! The LEDs of the tree change color and are used as oscillators to generate weirdo-sound. There are four sections with two LEDs each which modulate each other. You can patch the oscillator outs to the left or right output with mini-patch wires.With this DIY kit you have 2 options:1) The tree can be used standalone with a 9V battery as a simple light effect which is standing on a table etc. In this version there is no audio possible.2) You complete the whole module and solder the tree to the panel. Then you can make use of the full audio possibilities.This kit is perfect to build it with your kids or finally convince your partner, that modular maybe isn't that bad.DIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
Static module it's a comprehensive collection of noise sources generated with different methods.Features:• 2 control pots: MORPH, SPECTRUM• 1 switch: spectrum type TR/CHIP• 8 outputs: MSWHITE, MSPINK, ZNWHITE, ZNPINK, DARK, MORPH, TROUT, RNDVOLTDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
As the name suggests this module can produce sub frequencies of -1 and -2 octaves relative to the square wave signal provided at the input jack.But this is not just a simple SUB generator. It also has a little mixer that will let you add different levels of -1 and -2 octave signals to the original square wave. You can select the -2 octave signal to be a square wave or a pulse wave.The module has individual outputs for the mixed signal, the -1 octave and the -2 octave.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
The VCZIII voltage controlled oscillator modules are our latest creation and are based on the VCOs of one of the most revered analog instruments, the famous British pin matrix synth released in 1969.The VCZIII series VCO is a result of the collaboration of Feedback modules and CMS-LAB and is a modern re-creation of those temperamental, organic and beautiful sounding VCOs from 1969 but with enhancements and adaptations to the Eurorack needs of 21st century.There are two type of VCOs, VCZIII A based on VCO1 with variable shape SINE & SAW waveforms, VCZIII B based on VCO2 & VCO3 with variable TRIANGLE & PULSE waveforms.Also, each VCO comes in two versions, one with normal fine tune potentiometers and one with precision multiturn potentiometer.THIS VERSION IS WITH NORMAL FINE TUNE POTENTIOMETER.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
only 1 left
The VCZIII voltage controlled oscillator modules are our latest creation and are based on the VCOs of one of the most revered analog instruments, the famous British pin matrix synth released in 1969.The VCZIII series VCO is a result of the collaboration of Feedback modules and CMS-LAB and is a modern re-creation of those temperamental, organic and beautiful sounding VCOs from 1969 but with enhancements and adaptations to the Eurorack needs of 21st century.There are two type of VCOs, VCZIII A based on VCO1 with variable shape SINE & SAW waveforms, VCZIII B based on VCO2 & VCO3 with variable TRIANGLE & PULSE waveforms.Also, each VCO comes in two versions, one with normal fine tune potentiometers and one with precision multiturn potentiometer.THIS VERSION IS WITH BOURNS MULTITURN FINE TUNE POTENTIOMETER.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
The VCZIII voltage controlled oscillator modules are our latest creation and are based on the VCOs of one of the most revered analog instruments, the famous British pin matrix synth released in 1969.The VCZIII series VCO is a result of the collaboration of Feedback modules and CMS-LAB and is a modern re-creation of those temperamental, organic and beautiful sounding VCOs from 1969 but with enhancements and adaptations to the Eurorack needs of 21st century.There are two type of VCOs, VCZIII A based on VCO1 with variable shape SINE & SAW waveforms, VCZIII B based on VCO2 & VCO3 with variable TRIANGLE & PULSE waveforms.Also, each VCO comes in two versions, one with normal fine tune potentiometers and one with precision multiturn potentiometer.THIS VERSION IS WITH BOURNS MULTITURN FINE TUNE POTENTIOMETER.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
The VCZIII voltage controlled oscillator modules are our latest creation and are based on the VCOs of one of the most revered analog instruments, the famous British pin matrix synth released in 1969.The VCZIII series VCO is a result of the collaboration of Feedback modules and CMS-LAB and is a modern re-creation of those temperamental, organic and beautiful sounding VCOs from 1969 but with enhancements and adaptations to the Eurorack needs of 21st century.There are two type of VCOs, VCZIII A based on VCO1 with variable shape SINE & SAW waveforms, VCZIII B based on VCO2 & VCO3 with variable TRIANGLE & PULSE waveforms.Also, each VCO comes in two versions, one with normal fine tune potentiometers and one with precision multiturn potentiometer.THIS VERSION IS WITH BOURNS MULTITURN FINE TUNE POTENTIOMETER.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.