Inamp is a dual pre-amp in just 4 HPs. Featuring 6,3 Jacks inputs as well as Minijacks.The unit is designed to amplify up to x20 the input signal, allowing to amplify most of the music machines out there (Domestic line levels) as well as some guitars (Humbucker-like pickups and so).DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.

Instrument Interface is an eurorack pre-amp capable to bring any type of audio signal to modular levels thanks to its amplification circuit.The module can drive regular and condenser microphones (+48V Phantom Powered) as well as Instrument and Line signals with a very low distortion ratio.Instrument Interface offers some additional extra functions like a Trig/Gate extractor and Envelope Follower circuits, allowing you to use the character of your audio signal in more creative waysFeatures:• Neutrik combo Input• Phantom Power selector• Input Impedance selector• Separated Audio en Envelope Level controls.• Envelope Follower with attack and decay control• Gate and Trigger Extractor with threshold selector.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.

IROI is a compact 18HP stereo effects processor designed to transform external sound sources into deep, atmospheric textures. Based on the processing concept of Oneiroi, it offers a focused signal chain with a new mapping structure, making it easy to shape evolving drones, cinematic layers, harmonic movement and character-filled soundscapes from any incoming audio.At its core, IROI combines a stereo multimode filter, fast digital VCA, 3-band resonator, 2-tap echo and experimental reverb. The filter/VCA block can be placed at different points in the signal chain, allowing flexible tone shaping before or after other processing stages. The multimode filter offers low-pass, high-pass, band-pass and comb modes, ranging from smooth spectral control to metallic, animated coloration.The resonator adds physical presence and harmonic depth, while the echo and reverb sections create anything from lo-fi repeats to wide, immersive spaces. The Spacetime control moves smoothly between short, long and inverted reverb behavior, opening up dense, blooming atmospheres with a strong sonic identity.IROI also features a powerful modulation and mapping system. Parameters can be randomized, modulated or CV-controlled with adjustable depth, while the internal LFO, envelope follower and seven selectable wave shapes allow sounds to move, react and reshape themselves over time. Global Mod Level control makes it possible to scale all active mappings at once, keeping complex modulation playable and controlled.Features• Compact 18HP stereo effects processor for external sound sources.• Inspired by Oneiroi with a focused signal chain and new mapping structure.• Stereo multimode filter with low-pass, high-pass, band-pass and comb modes.• Fast-response digital VCA for dynamic signal shaping.• Filter/VCA block can be placed at different points in the signal chain.• 3-band resonator for metallic texture and harmonic depth.• 2-tap echo for rhythmic repeats and lo-fi delay character.• Experimental reverb with macro control over size, filtering and direction.• Spacetime control for smooth transitions between short, long and inverted reverbs.• Internal LFO, envelope follower and seven wave shapes for self-modulation.• CV control with attenuators on most parameters.• Powerful randomizer with four target modes plus undo/redo.• External sync input for synchronized modulation and timing.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.

A compact attenuverting (attenuator-inverter) joystick controller and Gate Generator. With it, you can generate and process two control voltages using only one hand. Provided controls for CV ranges and offset adjust the boundaries of your control, this way it never gets out of the desired range, ensuring sensibility and playability even with wild performance gestures.Features:• Robust arcade style joystick for manually generating either CV with Range and Offset control or attenuating two input signals• Two push buttons to generate gates manually.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.

The JumpSkiff is a lightweight and portable 98HP skiff with integrated bus board and powersupply. It is made from lightweight and flexible materials including a PCB base (which doubles as the bus board) and side panels, acrylic end panels and aluminium rails.Features:• Connectors: 14x IDC 16 pin• Size: 98HP• Depth (inc. connector): 52mmDIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.

Kickall is a 6HP compact synth voice that features everything needed to make a big fat Kick sound. A stable VCO that tracks V/Oct, a couple of VCAs, envelopes for volume and pitch and an aggressive waveshaper.The module has been designed with a kick synthesis patch in mind.The audio path consists of a sinewave oscillator that passes across a Square Waveshaper and two VCA’s. The first VCA is for the Volume envelope. The second VCA is dedicated to general volume. Thanks to his CV input, it is possible o apply accents or affects the dynamics of notes. Feeding this input with audio generates a basic AM operation expanding the sonic range of the module.In the control path, KickAll has two envelope circuits to modulate the first VCA oscillator’s pitch. Both envelopes are fired at the same time manually or via dedicated trigger input.Through its Tune input, KickAll tracks eight octaves with high accuracy. Plug your favourite sequencer or CV source to create patterns out of the kick range, or feed it with an audio signal, for frequency modulation Fx.Features:• Accurate V/oct tracking.• CV controllable Sine to Square waveshaper.• CV controlled envelope decay for main VCA.• CV control over General volume (after VCA).• Wide range pitch envelope control.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.

Knurlies are the first screws out there specially designed for eurorack. Engineered with love by Befaco to make re-arranging your case a matter of minutes!Knurlies can be fastened by hand, Phillips, slot or Allen. And brings a plastic washer already in place to avoid rack rash.These screws are M3/M2,5 x 7 mm so they can be used also on those 3 mm thick panels as well as regular 2 mm ones.Features:• 7 mm long• Phillips, slot, Allen and thumb enabled!• Flat-tight Washer to avoid rack rash.

Lich is a programmable multi-function module based in the Rebel Technology OWL platform that allows you to use Pure Data, Max Gen or Faust code into your module!.Lich is a Befaco Rebel collaboration that brings back Owl’s platform with this new hardware iteration. It has stereo in and out, four pot controls summed to cv inputs (like the classic Owl module) And as addition, CV and Gate outputs, patch selection with display and USB MIDI host and device connections.Features:• Stereo Audio IN and OUT at 48k 24 bits.• 4 CV controls (Pot + Attenuated CV in)• 2 CV outputs.• 2 Gate intputs + buttons.• 1 Gate Output.• Patch selection and visialization via display.• USB host and Device connectionsDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.

Lunchbus is an ultra-compact distribution bus with power supply.It’s 12 mm tall, featuring horizontal connectors to maximize space.Power connector and ON/Off are specially situated to make assembly on the case ultra-easy.Features:• 12mm tall• Horizontal connectors to maximize space• 2,5mm barrel power connector• On/Off buttonDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.

MEX, is a gate expander for Muxlicer! It adds a new line of gates to Muxlicer’s sequence, where you can choose to turn off the step, output same number of gates as muxlicer, or sending just one. A very simple concept, that provides great flexibilty! And greatest thing: you can daisy chain them so you can add as many as desired!Features:• Extra 8-Step Gate Sequencer for Muxlicer• Three modes of operation selectable per step.• Several units can be daisy-chained to create entire sets of different patterns.• Powered directly from the Muxlicer.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.

Mid Thing v2 is a flexible MIDI to CV converter. Allowing polyphonic notes handling, envelope and LFO generation as well as all available MIDI messages to be converted into CV. This is a huge upgrade from our previous beloved MIDI Thing, which adds a screen for easy configuration, 12 assignable ports, TRS, USB Host and Device, MIDI merge OUT, a web configuration tool, and a VCV rack bridge counterpart.Features:• 12 Configurable ports• TRS type A MIDI IN and OUT, USB host and device connectivity.• Configuration screen with intuitive menu diving• Web configuration toolDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.

Utilitarian Audio & CV Mixer - (Version 2025)Combine up to four audio and or CV sources into one output, with independent manual level control. It can be used as a four-channel mixer or as two separate two-channel mixers, depending on the connection. If a cable is connected to the Master output but not to the 1+2 output, all channels will be summed at the Master output. If both the Master and 1+2 outputs are connected, the Master will output the mix of channels 3 and 4, while the 1+2 output will provide the mix of channels 1 and 2. Each pair of channels has an LED indicator that shows the presence of a signal.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.

Morphader is a performative tool designed to make multichannel CV/Audio crossfade easy and comfortable. Fading from one quad CV/audio scene to another. The core of the module has four CV controlled crossfaders, each with their individual control and a master fader to control them all. The module mixes the four crossfades at its fourth output, thanks to a clever normalization scheme. Each of them can be easily removed from the mix by plugging a cable at its own output.Features:• CV Controlled four channel crossfader.• Attenuators per input.• Normalized voltages to every input, allowing cv levels morphing.• Audio CV response switch per channel• Master Fader control with Lag.• Leds per channel for signal level monitoring.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.

Clock Multiple, Conditioner, and Divider in a compact 2 HP formatDistribute your clocks throughout your system using minimal rack space.The first three outputs maintain the same frequency as the input, while outputs 4 to 7 provide time divisions of 1/2, 1/4, 1/8, and 1/16.The active topology allows you to patch clocks on the fly, avoiding the tempo interruptions that can occur with passive multiples.To reduce the footprint, the input is a TRS jack, with the clock signal on the tip and the reset on the ring. For standard clock only operation, use a regular mono cable, or use the provided splitter to access the reset function.Features:• IN Accept pulses greater than 2V.• Scale all clocks to 10V.• Accept audio rate square waves for suboctave generation.• 7 Outs: 3 conditioned copys + 4 quadratic divisions.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.

Muxlicer is a sequential signal processor designed for add a huge range of special functions to your modular setup in the minimum space.Is divided in three main blocks: a Digital Step Controller, a Gate Generator and an Analog Switch (a.k.a. Mux/DeMux)The module is designed with high “function to HP ratio” philosophy , to have maximum flexibility in minimum space.An analog switch is a device capable of switching or routing analog signals. In the case of Muxlicer, the switch is reversible, so you can send 8 different signals to 1 destination and viceversa.Through Common I/O you can either send a signal to the Mux I/Os or receive a signal from them. (Depending on how the module is connected). It is also used as CV Out when nothing is connected to “All In” or “Mux I/Os”. The eight Mux I/Os are normalled to “All In” jack, so any signal present at this input will go to all of them.Imagine you want to send a signal to steps 1,2,4,5,6 and 8 and two more signals to 3 and 7 respectively. You just need three wires for this: plug the first one to All In and the other two to 3 and 7 Mux I/Os and you are done!Features:• Route any modular signal from one IN up to eight different Outs or vice versa.• Generate CV and Gate signals, been able to work as sequential voltage source a.k.a. sequencer.• Cut audio signals in rhythmical slices with independent volume.• Generate complex and dynamic patterns from any audio or modulation signal.• Create powerful Gate sequences with control voltage retriggering for each step.• Select easily when your signals act on your patch with the Address function.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.

Noise Plethora is a multitimbral noise monster in 14HP.The module consists of three digital sound generators, followed by three analog multimode Filters. This combination makes it easy to sculpt different textures and noises and play with them intuitively and musically.The first two channels let you choose from dozens of different algorithms and can be controlled dynamically by two CV controls.Textures, rumbles, low-fi blips, spikes, oscillator clusters, harsh noises, and much more can be chosen and changed on the fly.The third channel has three independent outs: Gritty noise to create crispy and crackling soundscapes, White noise, and a filtered version with either of those two.Features:• Two digital noise channels based on different algorithm banks• Two CV controlled parameters per algorithm• Analog Multimode Filter per channel (OTA based)• White and Granular Noise dedicated outputsed outputs.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.

Noodler is a compact modular synth cable hanger designed to keep patch cables, tools and small studio accessories organized in one practical place. Built to mount directly onto a standard microphone stand, it keeps your modular setup tidy while making cables and essentials easy to reach during patching, recording or live performance.Designed with real modular workflows in mind, Noodler offers multiple cable slots plus dedicated storage for Knurlies, star multiples, screwdrivers, jack adapters and other small items that often disappear during a session. A built-in headphone hanger keeps headphones close at hand, while the dedicated slot for the included Synth Duster helps keep your setup clean and ready to use.The custom locking nut system allows Noodler to be fixed in place or left freely rotating on the mic stand, depending on your preferred workflow. Sturdy, compact and highly practical, Noodler quickly becomes a natural part of the studio setup: a simple utility that brings order to cable-heavy modular environments.Features• Modular synth cable hanger for standard mic stands.• Multiple cable slots for organized patch cable storage.• Dedicated space for Knurlies, star multiples, screwdrivers and jack adapters.• Built-in headphone hanger for quick access.• Dedicated slot for the included Synth Duster.• Custom locking nut for fixed or rotating positioning.• Compact, sturdy design for studio and live setups.• Keeps modular accessories organized and within reach.

A harsh and funky take of an additive Oscillator. Pile up multiplications of your frequency to get a lo-fi-retro wall of squared sound! You get six doubled frequency pulses, or octaves, with common PWM and volume control for each of them. The output of each is cascaded to the next one, so you can either have one output with all frequencies or break the chain and get several sums and modulate each independently!Features:• Six bands, multiple of the base frequency• Square wave oscillator with Octaves selector PWM control and sync• Range control for Tune pot• Volume CV control and individual output for each band• Cascaded summing outputsDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.

Experimental synth voice focused on ambient pads and drone-like soundscapes.Features:• Stereo External input with selectable gain.• 5-second looper Records either the stereo input or the module’s output• Sine oscillator• Supersaw oscillator• Wavetable oscillator that uses the Looper buffer• Multimode filter: low-pass, band-pass, high-pass, and comb filter.• 3-band resonator• 2-tap echo• Reverb with macro control for size, filtering, and direction.• CV Control with attenuators on most parameters.• Various types of self-modulation with configurable routing and control over level and speed.• External synchronization via sync input.• Powerful randomizer with four different targets, three levels of intensity and undo/redo.• Knobs catch behavior functionality for re-coupling parameters’ positions.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.

Oneiroi is a full-stereo synthesizer crafted for dreamlike soundscapes, immersive textures, and cinematic atmospheres. At its core lies a rich combination of synthesis engines and creative sound processing: a sine wave oscillator, a versatile wavetable/supersaw voice, and a playful looper capable of recording external input or internal output with “sound-on-sound” layering. These elements flow into a powerful effects section featuring a multimode filter, resonator, stereo delay, and lush reverb—ideal for generating hypnotic drones, evolving pads, and experimental sonic landscapes.Modulation possibilities within Oneiroi are highly flexible, thanks to complex internal routing and a powerful randomizer that generates instant patches at the press of a button. With four distinct targets, three levels of intensity, and dual switch-controlled behavior, it lets you dial in anything from subtle variation to wild, unpredictable textures—complete with undo/redo to capture the perfect moment.The built-in 5-second looper not only captures audio but also feeds directly into the wavetable oscillator, enriching your sound palette with evolving textures. Whether you're layering field recordings, sampling your own tones, or sculpting ambient washes from scratch, Oneiroi encourages spontaneous creativity and deep modulation.This version includes a 4ms Pod 42 HP powered case, transforming Oneiroi into a self-contained, portable stereo powerhouse—perfect for live performance, studio exploration, and ambient sessions on the go.Features:• Stereo External input with selectable gain.• 5-second looper Records either the stereo input or the module’s output• Sine oscillator• Supersaw oscillator• Wavetable oscillator that uses the Looper buffer• Multimode filter: low-pass, band-pass, high-pass, and comb filter.• 3-band resonator• 2-tap echo• Reverb with macro control for size, filtering, and direction.• CV Control with attenuators on most parameters.• Various types of self-modulation with configurable routing and control over level and speed.• External synchronization via sync input.• Powerful randomizer with four different targets, three levels of intensity and undo/redo.• Knobs catch behavior functionality for re-coupling parameters’ positions.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.