Modular
sold out at the moment
Klang Stadt is the latest FC iteration of Electric Druid’s VCDO digital wavetable oscillator.Features:• CV’d interpolating waveforms• LFO• CV’d subosc waveforms and octaves, CV’d glide, bitcrushing and more!• Frequency CV input accepts 0-5V control voltages• Quantized to semitones, to cover the MIDI note range 0-63• improved PWM filtering• addition of Sub Two output• addition of Klang output• addition of Xmod feature• onboard LFO for riding the wavesDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
Generative sequencer based around a clock divider and a chromatic quantiser. Creates in-the-moment licks and riffs. Little Melody is a generative sequencer based around clock divisions and a chromatic quantiser, used to create in-the-moment licks and riffs. It is more that the sum of it’s parts.Little Melody’s internal operations can be considered as 4 clock dividers patched into a CV mixer via attenuators. The attenuators select notes over a 5 octave range, the clock dividers determine how often those notes are added to the mix. The final output of Little Melody is quantized chromatically for fast set up and continuously pleasing results.The 4 clock dividers are labelled A, B, C, and D. They all receive clocks from the same source, the divisions may be selected using the presets and the individual division selectors. The clock dividers can be set to count up, down, or to one of a variety of modes that move between counting up and down.For further information see the Little Melody User Guide.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
Logic Bomb is a Boolean logic module with two independent but identical sections.Both sections feature addressable Boolean logic, with a choice of any one of:• NOT A• NOT B• AND• NAND• OR• XOR• XNORDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
Looking Glass is an 5 x 5 active patchbay/matrix mixer/switcher for both audio and control voltages.Features:• 5 inputs (1 through to 5), each with attenuators• 5 inverted outputs (A through to E) which are 180o out of phase with the inputs• 5 normal outputs (A through to E) which are in phase with the inputs• A switch matrix of 25 push on/push off switches and LED status indicatorsDIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.
only 2 left
Meth Amp is based around the fuzz core of the EH Big Muff pedal. Lovely fuzz and distortion based on the classic Big Muff pedal! It’ll do wooly warm fuzz, subtle tone shaping with a soft saturation/colour, feedback madness and work as a great output VCA (LPG style tones possibly too). The clipping diodes have been replaced by red LEDs to take account of the change in power supply from 9V in the original Big Muff to +/-12V in Meth Amp.To the fuzz core has been added a bunch of OTAs, each controlling a different aspect of audio processing: gain, regen (a new feature - not present in Big Muff), tone and volume. Thereby, each feature is fully voltage controllable.Additionally, there is a separate x100 preamp which can be used to boost external audio for further processing by Meth Amp. Here is a Video about it.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
20 HP hardwired synth voice for fast set up times, with a decidedly East Coast feel.Monograf is a fixed signal path monophonic synth voice with many unique features, including a number of patch points for flexibilty within a modular setting. Our aim was to design the simplest full featured and good sounding single VCO synth within as small a space as possible, while offering a broad sonic palette and fast setup times.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
Polygraf is a step sequencer that features record/edit and playback functionality across 32 different patterns of up to 16 steps.Polygraf has four binary outputs (can be High or Low), labelled One, Two, Four, and Eight. During playback, Polygraf outputs a combination of High and Low for each of those outputs. The combinations can be edited by setting Polygraf to write mode and following the necessary procedure.Patterns: Polygraf has 30 Patterns (Patterns 1 to 30) that can be overwritten/edited, and 2 Patterns (Patterns 31and 32) that cannot be changed. Patterns are composed of up to 16 Steps (but can be recorded to be shorter).Steps: Polygraf has four binary outputs (can be High or Low), labelled One, Two, Four, and Eight. A Step outputsa specific combination of High/Low for each output. During playback, clocking advances Polygraf to the nextStep (or wraps around to Step 01 if there isn’t one). Individual output configuration can be uniquelyrepresented as a 0 to 15 number known as the State.State: A unique combination of On/Off for all of the outputs. There are 16 possible combinations thus 16possible States. We number these 00 to 15. A State’s identifying number can be determined by adding the valueof the outputs that are On. E.g. if outputs One and Four are On (and Two and Eight are Low) then the number is05 (because One + Four = 5).Pattern chaining: When in Play mode, Polygraf’s STATE potentiometer is used to determined the pattern chaining mode. Thepotentiometer acts as a four position switch. When changing between positions on the switch, Polygraf’s 7 segmentdisplays briefly indicate which position you are in, eg briefly showing ‘02’ to indicate the second position.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
Full featured, fully modular synthesiser for Eurorack with a pre-patched normalised signal path for quick setup.A combination of the XVCO TWO, Raging Bull 3.0 VCF/VCA, and System X Envelope, where each section can be used completely individually or as part of the larger whole.Onboard LFO for PWM and FM and Noise Source.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
only 2 left
Voltage controlled Filter Moog Taurus. Raging Bull is based on the legendary Moog Taurus Mk I VCF and VCA. It has a lovely, thick Moog-like quality, which is further enhanced by the drive you can get out of its VCA at higher settings.A big part of the sound of the Taurus was the way in which the VCF interfaced with the VCA, so on Raging Bull the VCA is always in the audio path. A toggle switch allows you to select ‘always open’ or CV control of the VCA from CV input 3.By sending an ADSR into CV3, the signal will go to the VCA CV input unattenuated and the VCF CV input via the attenuator 2. By sending a gate into CV3, and setting the attenuator to zero, the VCA can be gated while the gate has no affect on the VCF.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
only 2 left
Reset Simulation is a Boolean logic module with two inputs, A and B, and 8 simultaneous outputs.NOT A, NOT B, AND, NAND, OR, NOR, XOR and XNOR.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
only 2 left
Versatile Drum module with 8 vintage sounds. Snare Drum variant. Seismograf is a PIC based drum module featuring coding by Jetroid. There is currently a choice of two PICs which may be used with Seismograf, "BD" and "SD". As you might expect, BD contains a range of 8 bass drums, while SD contains a range 8 of snare drums. The drum sounds are 10 bit encodings of some of our favourite electronic kits from yesteryear (see chart below). It is not possible for the user to load their own sounds onto Seismograf PICs, but there is a chance that we may release alternative drum sets as the years roll (!) by.Features:• Sound 1 808• Sound 2 808• Sound 3 909• Sound 4 SDSV• Sound 5 LM1• Sound 6 DMX• Sound 7 CR78• Sound 8 DRUMTRAKSDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
Versatile Drum module with 8 vintage sounds. Base Drum variant. Seismograf is a PIC based drum module featuring coding by Jetroid. There is currently a choice of two PICs which may be used with Seismograf, "BD" and "SD". As you might expect, BD contains a range of 8 bass drums, while SD contains a range 8 of snare drums. The drum sounds are 10 bit encodings of some of our favourite electronic kits from yesteryear (see chart below). It is not possible for the user to load their own sounds onto Seismograf PICs, but there is a chance that we may release alternative drum sets as the years roll (!) by.Features:• Sound 1 808• Sound 2 808• Sound 3 909• Sound 4 SDSV• Sound 5 LM1• Sound 6 DMX• Sound 7 CR78• Sound 8 DM55DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
Shapes is a wide ranging and fully analogue oscillator which can perform duties as both auxilliary VCO* as well as VC-LFO. Shapes can be configured to cycle continuously, or to provide one-shot shaped outputs. When set to one-shot mode, Shapes may be used as an ersatz envelope generator.Using the Time knob, Shapes can cycle from as low as 8 seconds (whale song) to as high as 19500Hz (bat beeps).Shapes has 3 simultaneous outputs:sawtooth (+/-5V, 10Vpp)ramp (+/-5V, 10Vpp)triangle (+/-5V, 10Vpp)Additional waveforms may be derived courtesy of the Shape knob. Anticlockwise from 0 achieves progressively logarithmic sawtooths and ramps, whereas clockwise from 0 achieves progressively exponential sawtooths and ramps. The effect of the Shape knob on the triangle waveform is asymmetric, anticlockwise from 0 achieves progressively logarithmic leading edge, whereas clockwise from 0 achieves progressively exponential falling edge. Progressively exponential triangle waveforms can be achieved using the Time CV knob (set Shape knob to 0) providing there is no jack in the Time CV input socketTime CV input provides wide ranging control of time. It is possible to dial in something approaching 1V/oct over a limited range, although Shapes has not been designed to perform as an accurately tracking VCO. In the audio range, Shapes comes into it’s own when used as a ‘daughter’ VCO to an external ‘mother’ VCO by patching the ‘mother’ VCO into Shapes’ Gate In input socket – some impressive oscillator sync style effects can be achieved.Gate In can also be used to initiate waveforms in one-shot mode, where a pulse of any length will cause Shapes to complete one cycle.*Shapes has not been designed to perform as an accurately tracking audio VCO.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
only 2 left
Silent Disco is a 4 HP output module with left and right line outs, and 2 x stereo headphone outs (1 Watt). Silent Disco was designed for CFON2 modular workshops 2023. This year’s theme was Silent Disco. There were 8 separate modular systems, each system having its own Silent Disco module. Participants at the workshops were able to explore each system via the dual headphone outputs of their Silent Disco module. The Silent Disco modules also allowed us to hook up each of the 8 systems to to a multitrack recorder and a PA system at line levels, so we were be able to carve out a live soundscape out of the participants’ improvisations. Participants could also move around the room from system to system by unplugging their headphones from one system and plugging into another.Features:• Left and Right Eurorack level inputs (2 x 3.5mm sockets)• Left and Right line level outputs (2 x 6.35mm sockets)• 2 x stereo headphone outputs (2 x 6.35mm sockets)• Stereo volume control for headphone outputs• Right input is normalled from Left input when there is no jack in the Right inputDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
DSP based stereo chorus/tap delay/plate reverb module. Stasis Leak is a 6 HP 48kHz DSP effects module, providing a choice of stereo chorus, stereo plate reverb and tap tempo delay. Stasis Leak is based around a Belton ABE-FX sub board, which in turn is based around a Coolaudio V1000 chip.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
Variable Roland style filter. Based on the Roland System 700 state variable filter module. Lowpass, bandpass and highpass outputs. A big part of the sound of the State 700 is the way in which resonance is reduced as the audio inputs are driven harder. It won’t self oscillate with a hot audio input, throttle back a little and you’ll get squelchy ear bleeding resonances!DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
only 1 left
Expandable 4 channel VCA based stereo mixer with tone shaping and FX bus. Strips is also expandable! You can add a second strips, connected to the first via a 16 pin to 16 pin cable. The cable powers the second Strips and gives you 8 channels to play with. The second Strips accesses the first Strips FX bus. When using in expanded configuration, the FX send/return and main outputs for the second Strips are not available.FX phase jumper – because not all FX that you might use in the FX loop are in phase with respect to their input/output. The phase jumper allows you to compensate for this and avoid weird phase cancellations.Features:• 4 x input channels, each featuring LEVEL, HIGH, LOW, FX send, PAN, MUTE and CV control of level.• FX send and stereo return + FX phase jumper• Left and Right Eurorack level inputs (2 x 3.5mm sockets)• Left and Right line level outputs (2 x 6.35mm sockets)• Scribble strips!DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
Envelope Generator, based on the Roland System 100M 140 ADSR. “The snappiest ADSR in the world”.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
ThermoNuclear is a sub-miniature vacuum tube based overdrive. The first stage is a MOSFET with switchable mu-amp. The second stage is a self biased sub-miniature pentode with switchable triode/pentode. Then there’s a tonestack based on the EH Big Muff. Finally, there’s a blend control and another MOSFET stage for some gain recovery after the tonestack. ThermoNuclear will crush and destroy your tone with a pleasing warm tubey goodness.Although the filament of the tube will glow, it’s not a lightbulb, and the level of glow may vary between different tubes.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
Trans Europa is a CV processor / generator Module.Features:• Octave switching over 9 octaves• Voltage controlled octave switching, CV input is bipolar +/-5V• Semitone transposition over 1 octave• Voltage controlled semitone transposition, CV input is bipolar +/-5V• 8 Modes (see below)• Glide feature, which can be applied either manually or by external gate.• CV thru, you can patch a 1V/oct voltage source in Trans Europa’s Input, it will be replicated at the Output, with the benefit that all Trans Europa’s features can be applied.Modes• Semitones• Minor 7th• Major 7th• Rick’s Chord• First Fourth Fifth• Diminished• Sustained A• Sustained BDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.