Clock, Trigger, Gate
available
Infinitely Maybe is a full featured randomness module, with a number of sources of randomness:• White noise• Pink noise• Sample and hold circuit• Random gates circuitAn onboard CV mixer allows you to mix two different sources into the sample and hold circuit. White noise is normalised to CV input 1, Pink noise is normalised to CV input 2Infinitely Maybe has an onboard clock for triggering the sample and hold circuit. This may be overridden with an external clock if required via the clock in socket.There is a built in LAG circuit, which enables the S/H OUT to slide between voltages at a predetermined rate. This function can be remotely controlled via the LAG INFinally, a random gates output is derived from the S/H Out. With the MAYBE knob at 0 a constant gate is available. The further you turn the MAYBE knob towards 10, the less likelihood of a gate is.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
The EZSQ is a simple 8 step sequencer featuring a clock input, reset input and pitch output. It was designed to sit next to the VCSQ2 to give it even more power, but 8 steps sequencers are useful anywhere in all modular cases.Features:• 8 steps• Clock input• Reset input• CV outputDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
This is the DIY version of this unit.Pathways is a modular matrix mixer designed for feedback manipulation, creative routing, weird synthesis… and many other things.Based around sixteen analog VCAs it can be the central hub of many different setups and a bridge between desktop gear and eurorack systems.Features:• 4x 1/4″ inputs with gain / drive control, 4x 1/4″ outputs• Each of the 16 matrix intersections can be controlled manually or via CV, a dedicated LED gives visual feedback of the channel volume• An envelope follower is normalled to input four, the signal then gets fed through a clock divider with three cascaded outputs. Willingly, an external signal can be inserted into the divider• Two voltage controlled LFOs can modulate any parameter and create dynamic feedbacks, asymmetrical panning, tempo-related fx send/returns• If patched into itself, each channel can self oscillate so it can be used as a polyphonic cv-controllable drone synthesizer• full eurorack compatibility, each parameter has its own 1/8″ input jackDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled unit. The kit includes all parts to build the unit. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
This is the DIY version of this unit.Solid Felt is a stereo multimode analog filter in desktop format.Its name comes from the etymology of the words “stereo” and “filter”.From subtle timbral variation to an all-encompassing sonic treatment, Solid Felt can be used in multiple ways to embellish or vandalize your sound bouquet:As two independent mono filtersto give a stereo treatment to a mono signalto filter a stereo signal at the same cutoff frequency on the L and R channelsAs a mono 24dB/oct filter (placing the two filters in series)To synthesize sounds, via external feedback patchingTo extrapolate a CV signal from your audio input and use it to control any of its parameter or external gearAs a stereo overdrive effectTo bring line level signals to Eurorack levelFeatures:• 2x Analog multimode analog filters• 2x 1/4″ jack high impedance inputs• 2x 1/4″ jack low impedance outputs• 8x 1/8″ jack eurorack compatible CV inputs• 8x 1/8″ jack eurorack compatible CV outputs• Input gain control to amplify incoming signals up to fuzzy territory• mode control to select between lowpass, bandpass and highpass filter response (CV controllable)• an envelope follower (normalled to input A) which is fed into a three stage clock divider• a voltage controlled LFO with waveform blend control and two outputs 180° out of phase• a voltage controlled LFO with rising and falling sawtooth outputsDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled unit. The kit includes all parts to build the unit. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
Herzlich Labs - R2R Ladder 8-bit DAC. It's a passive R2R ladder circuit, which will do all kinds of neat things in your system. Use it as an 8-Bit Digital to Analog Converter, punch in a bunch of digital signals in every numbered input, and from the output you shall find a delightful analog signal.Or why not use it as a weird, passive weighted mixer? A fixed-setting attenuator? Why not plug in a bunch of stuff and just see where it takes you? I promise it's safe, thanks to the brilliant design and architecture of the Herzlich R2R.In delightful 3 HP to fill that space left by another odd-sized module.Features:• Passive 8-bit DAC• Use it as a mixer, fixed attenuator or a number of other things• Flexibly use anything as input or outputDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
KRONO is a clock and rhythm generator module offering 12 independent outputs split into two groups, packed with 10 versatile modes ranging from Euclidean to chaotic rhythms. Designed for creative timing control, it features weighted tap tempo, external sync, state persistence across power cycles and a unique swap function for inverting output group behavior. With visual feedback LEDs, fixed base clock outputs, USB-C programming, and open-source firmware, KRONO is a flexible and inspiring tool for rhythmic experimentation.Features:• 12 Clock Outputs divided into two groups (A/B)• 10 Operational Modes covering standard, mathematical, musical, probabilistic, and chaotic rhythms.• Weighted Tap Tempo & External Sync• State Persistence: Saves Tempo, Active Mode, and Swap State for each mode, retaining them across power cycles.• Calculation Swap: Inverts functions between groups via the MOD button or external gate.• Visual Feedback: the Status LED indicates the active mode; the Auxiliary LED signals state changes (tap, mode select, swap).• Fixed Base Clock Outputs: Outputs 1A and 1B always provide the unmodified main clock.• Hardware Platform: Based on CPU STM32F411.• Open Source: Firmware developed with PlatformIO (C/C++), customizable.• Programming: Via USB-C DFU.• “whatever” power connector – don’t mind the polarity, it’s protected eighter way.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
DivSkip is a 4 Channel Trigger and Gate Processor, with loads of great modes. Bernoulli Gates, Clock Division, Turing, Euclidean Split, Euclidean Classic, Ramp / Gate Length, Retrigger and Pattern.Plug in triggers or gates from a clock, logic module or sequencer and generate new rhythms and variations. Modes include Probability, Clock Division, Turing, Euclidean, Retrigger, Gate Delays and 64 step preset patterns.Features:• 4 Channels of Triggers or Gates• push-to-mute• 8 modes per Channel• LED rings for visualizationDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
Eleven rhythmic outputs for wONkY drum patterns.• Pulses turns the sequence from the main Turing Machine into a series of repeating rhythmic semi-random clock signals, that are based on the main clock input.• Seven of the 11 outputs are just the binary steps of the sequence on the front panel of the main module. The other four are derived from those pulses - so when steps 1+2 are active, the 1+2 output pulses.• As with most of the Turing Machine features, it is hard to explain, but very easy and intuitive in practice: send pulses from the module to anything that takes a rhythmic pulse; envelope generators, FM Index inputs, drum modules or other sequencers. Very complex polyrhythms come easily.• Because the Pulses are all related to the main module, they randomise, lock and change with that module. With the main module's big knob at 12 o'clock, the pulses are random. At 5 o'clock, they are locked, and at 3 o'clock they will 'slip' slowly over time.• You can try out a fully operational Turing Machine + Pulses + Volts in the free VCV Rack software.• Pulses connects around the back with a 16-way ribbon cable and works with any Turing Machine (Mk2, or Mk1 with the backpack).• Pulses uses Surface Mount components but is still a very simple build for anyone who has done a bit of through hole soldering beforehand.• Here is an epic series of videos from mixolydian2010 that documents the whole build process• Here's a very old audio demo from when I was developing Pulses, which shows the kind of polyrhythmic craziness it can create.• Despite involving SMD components, Pulses is a very straightforward DIY build, that most people complete without any problems. If you get stuck, the Pulses Github Issue List or the main Turing Machine issue list are probably the best places to start.DIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.
only 1 left
Startup is a headphone amp, six-input mixer, tap tempo clock, divider & multiplier in 4hp. It's the perfect way to start a small Eurorack case. Full DIY Kit.Startup is designed to be the best way to start a small Eurorack case, featuring a Mixer, Clock & Headphone Amp. This is a really easy project for DIY newcomers, all the SMD components come pre-soldered and the PCB is programmed and testing prior to shipping. You just need to solder the buttons, jacks and pot. The Music Thing Modular ‘Startup’ is designed to be the best way to help start a small Eurorack case.This 4HP module does three things:1) It’s a 5 channel output mixer, with a spare channel for stereo signals (like a Korg Volca or a phone).2) It’s a nice clean headphone amp with two outputs.3) It’s a useful tap-tempo clock, with a second channel giving divided or multiplied clocks.The best way to understand Startup is with with the Quick Start Manual. (Use button below)DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
The Turing Machine is a binary sequencer based on a 16-bit shift register. Instead of precise programming, you steer its output.You can’t save or recall sequences—once changed, they’re gone.It generates clocked, stepped random control voltages (melodies, basslines, sequences) that can loop based on the length control.Since 2012, it’s been a popular Eurorack DIY project. Check #turingmachine on Instagram for demos.DivKid's 27-minute video explains it all, and here’s a 20-minute talk on its design.Sound on Sound Magazine published a nice review.Expanders connect to the module and modify sequences:• Volts: Extra voltage output controlled by five pots.• Pulses: Converts sequences into beats with 11 rhythmic outputs.• Voltages: Adds two CV outputs controlled by 8 faders.• Vactrol Mix: A matrix mixer for rhythmic audio cutting and panning.Looping is controlled by the big knob:• Noon = Random sequences.• 5 o’clock = Locked repeating sequence.• 7 o’clock = Double-length loop.• 3 or 9 o’clock = Loops with occasional changes.A free, virtual version exists in VCV Rack.Inspired by classic shift register synth circuits (Triadex Muse, Buchla 266, Noisering).Musically, it draws from 60s/70s minimalist composers like Steve Reich and Terry Riley.A Random Reading List covers its historical influences, from Marvin Minsky to Don Buchla.Open-source design has led to many clones and software versions (e.g., Mystic Circuits' Vert, VCV Rack modules, Mutable Instruments' Marbles).Despite the name, it’s not a true Turing Machine—just a looping data system.The original Mk1 documentation includes a detailed block diagram.It’s a dense but straightforward through-hole DIY build—better for experienced builders. Docs are on Thonk; troubleshooting on GitHub. DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
Particles, is 4 channels of trigger modulation, capable of mathematically variating and manipulating your patterns with a combination of fun features to play with. It can evolve your rhythmic idea into more complex and groovy patterns which are difficult to achieve without music knowledge.You can create your algorithms from the rhythmic tools provided to be able to change the patterns instantaneously in many ways without worrying to sacrifice the original idea.You can shift and scramble the outputs, you can repeat the triggers with different time signatures to transform the grooves, mute in different ways, disappear by probability trigger inputs, disappear by probability repetitions, use sequential switching to shift randomly with a different kind of resetting, bypass each channel and set it individually the amount of each feature per channel when feeding external CV.The idea of Particles, was designed to provide features for building complex breaks, grooves, organic-evolving percussion sounds, different options for arpeggios, and even bass line grooves, the limits are decided by you.Features:• 4 trigger inputs/outs.• Repetitions with different distribution time to choose from.• Manually shift the output channels, scramble them randomly or clocked them in foward mode.• Reset the ouputs to 4 different shift modes.• Dissapear repetitions by probability per channel.• Dissapear the input trigger by probability per channel.• Mute each channel with clock divisions from input clock.• Mute manually the outputs• Disable triplets from repetitions to have musical patterns• Random volatges output clocked from clock input.• The slider keeps the adjusted value from each feature.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
REWIRE is a 4×4 sequential switch and versatile signal router that lets you reconfigure a modular patch on the fly without touching cables.The module offers four inputs and four independent outputs, each with level control, switching logic and real-time manipulation and is built for dynamic signal flow, generative systems and performance precision. Fully clocked, resettable, shiftable and divisible, REWIRE functions as a patch programmer and performance brain in just 8 HP.Applications range from rotating LFOs across destinations and shifting melodies between voices to remapping triggers for generative grooves, stepping audio through multiple FX chains rhythmically, or using the faders as a simple manual preset bank.Features:• 4 inputs – 4 independent outputs (4×4 routing matrix)• Per-output level attenuverter (precision gain for each destination)• Sequential-switch for automated step-based routing• Clock input for tempo-synced switching• Resettable and shiftable for pattern control and live manipulation• Divisible/ratio modes for polymetric or subdivided switching patterns• Real-time manipulation – change routing without touching cables• Works with audio, CV and triggers (low-latency switching)DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
only 1 left
Λόγοι is a voltage controlled clock divider, counter, and delay. It subdivides and adds time, creating organic, evolving signatures. Λόγοι brings movement and life to the trigger signal, from a subtle swing to bizarrely complex and intricate rhythms. Instructions The functions of Λόγοι are split with division on the left, and addition on the right. The right side operates either in Counter mode, by adding clocks, or Swing mode, by adding a time delay. The mode is set by the centre switch. The module has CV inputs (top jacks) and trigger outputs (middle left/right jacks) for each side, and a combined trigger output (centre bottom jack) which gives the output of both operations: divide and add. The trigger input (bottom left and right jacks) is shared between division and addition. There is also a reset input (middle centre jack) and manual reset switch (push switch up). There are three LEDs indicating the divided and added output to the left and right, and the combined output in the centre. Divide The divider toggles its output every n clocks, where n is the divisor. The divisor is set with a manual (top knob) and CV level control, in a range from 1 to 32. Count With the switch in the down position, the additive side functions as clock counter. The counter will output a trigger signal every m clocks, where m is the addend. The range is from 1 to 32 clocks, with 16 in the centre position. The combined output will divide and count. If i is the incoming clock, n the divisor, and m the addend, then it will output a a trigger signal every i/n + m clocks. Note that when the addend is larger than the divisor, in other words, n < m, then the divider frequency is higher than the addition and the combined output will never trigger. Swing With the switch in the centre position, the right side adds a time delay to the input. The amount of delay, or swing, ranges from 0ms to around 1000ms. In Swing mode, the combined output passes all clocks through until each time the divisor triggers, when it adds a time delay. The result is that every n-th clock is delayed by m, where m is the amount of swing and n is the divisor. As in Count mode, if the divisor frequency is greater than the delay time, the combined output will not trigger. In Swing mode, this is determined by the combination of input clock frequency and delay time. DIY-Kit-Type: THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
only 1 left
Φορέω is a triple function processor for triggers, gates and clocks. It simultaneously performs pulse width modulation, multiplication and repetition, with individual input, output and CV for each function.• Pulse width modulation, as a ratio of the input signal rate, is adjustable from 0 to 100 percent. Multiplication also operates on the input signal rate, multiplying it by a factor from 1 to 16.• Repetition generates a burst of triggers, at the rate of the multiplier, with repetitions adjustable from 1 to 16.Each function has two knobs for manual and CV level, and three jacks for trigger input, CV input and trigger output.Pulse width modulation carries through to the outputs of the two other functions, and the three trigger inputs are normalled from top to bottom.When multiply and repeat are combined, Φορέω makes an excellent burst generator, perfect for rolls, flams and fills. The repeater gives precise control over burst length, while the multiplier easily moves from quarter notes, to thirds, to eights, to everything in between and lots more beyond. Go on, give us a snare rush!Φορέω is also extremely versatile with many utility functions, such as master clock doubling, clock modulation, and for triggering and clocking fast sequences. It even works as a square wave overtone generator with PWM, tracking audio input signals up to 20kHz.Φορέω perfectly complements Στοιχεῖα, Λόγοι, Κλάσματα and Χρόνος, completing our Euclidean series of trigger processors.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
only 2 left
The Robaux Decision Tree randomly sends a gate to one of three outputs and then to one of three sub-outputs. Generate unpredictable rhythms. You can choose to route a gate to a single random output or play polyphonic gates. Utilize the knob to transition from total chaos to a repeating loop.The latch mode lets you hold an incoming gate. Pair it with a multimode filter to select various filter types. Use it to alternate between a variety of waveforms. The random input routing injects vibrancy into your sound.The DCSN 3 can also function as a traditional clock divider. The signal is split from half to 1/16 on the top four jacks. Additionally, a continuous sequence is output through the lower eight jacks. Odd divisions enable intricate rhythm creation. Utilize it at audio rate for polyphonic chords using just one square VCO.DIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
The Robaux SWT16+ is a 16-track eurorack trigger sequencer with up to 64 steps per track.The Sweet Sixteen Plus is perfect for triggering drums, envelopes or modulation sources.With the new member of the Robaux family, you can switch between eight different patterns.This will allow you to create even more exciting performances. You can store these patterns in up to 16 memory banks.Program your tracks step by step. Play your tracks on the fly. Or just use the new Euclidean rhythm generator.The new design has even more crazy flashing buttons! With the improved menu navigation, you can use the sequencer even more intuitive.The sequencer offers 16 different modes to create and modify rhythms. Modes are divided into four distinct areas:Create, Perform, Track Settings and Sequencer Settings.Randomize your tracks, move your steps or reverse your patterns. With these tools, you can discover entirely new rhythms.And the new Coin function adds even more variety to your beats.Features:• Number of Tracks: 16• Number of Steps per Track: up to 64• Number of Presets: 16• Number of Patterns per Preset: up to 8• 1 x Clock In• 1 x Reset In• 16 x Trigger Out• 1 x MIDI Out (Alternative firmware and adapter required)• 28 x backlight silicon button padsDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
The SetonixSynth Detectorist is a 2 HP Gate-to-Trigger-to-Gate module, designed to provide useful “duty cycle”-like behavior from any sharp rising edge input.When triggered by either the gate input jack or manual pushbutton, the Detectorist will produce an adjustable-length pulse, spanning in length from 12 milliseconds - about 85 seconds over its three ranges. If the Detectorist is re-triggered while the output is already active, the count will reset but the output will remain active without dropping to zero, thus “tying” the pulses, or producing 100% duty cycle.Features:• Converts any rising-edge pulse to a gate with three time ranges• Overall hold range of 12ms - 85 seconds• Manual gate trigger/hold button• Capable of re-triggering while output is activeDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
available
The Clock O’Pawn mk2 serves as a versatile clock device, taking on the role of true "chef d’orchestre" for your modular system. Its transport section lets you start, stop, and reset instruments synchronized with its intuitive internal clock or have your setup dance with your MIDI equipment.If you find metronomic clock signals uninspiring, a variety of groove patterns and clock humanization features enable the maestro to guide your setup with distinctive shuffles and swings. To complete this rich set of features in a small yet powerful clock source: presets memory, select bus compatibility, and several handy options to configure the Clock O'Pawn the way it suits you the best.Features:• Clock source module offering four distinct outputs• Transport section with play, pause, stop, tap tempo and manual reset operations• Diverse selection of grooves, ranging from classic swing to experimental clock manipulation• Humanize adding randomisation to the clock timing• Accent output with 27 different patterns• Option menu for customizable preferences• Midi input for external sync with midi devices• Memory of 16 presets• Select bus compatibility• Skiff friendlyDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
AlgoRhythmic Generator. Two outputs and five different rhythmic flavors multiply by a load of “algo-rhythmic” processing to result in a practically infinite number of polyrhythms. That’s the fundamental formula that produces the Knight's Gallop principle : a dual trigger generator providing sequences according to tables and modes.The source tables contain patterns such as the Euclidean polyrhythms, and the modes allow the user manipulate and mangle those patterns according to different algorithms. As the module has two outputs, it is a very powerful instrument to create diversified and instantaneous polyrhythms.Features:• Dual Output Trigger Generator• Variable length sequences (up to 16 steps)• Length and Pulse amount potentiometers and CV inputs• Shift + & shift - buttons allowing to shift the sequence forward and backward• Main mode (MN) providing a lot of utlity modes for the second output : reset, no shift, invert and reverse• Compute mode (CP) calculating associated sequences for the second output delivering very musical polyrythm• Random mode (RD) adding randomness on the second output sequence, 4 amounts of randomness determined by the sub mode• Dual mode (DL) allowing to set the two outputs seperatly• Record mode (RC) turning the Knight's Gallop into a “play your sequence on the buttons to record it” module• Five different kind of tables for five different rythmic flavours : Divider Sequences, Classic Euclidean, Revised Euclidean, Anti Euclidean & Split Sequences• User replaceable firmware chipDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
The Time Apprentice is a compact dual configurable clock divider. The dividers have their own set of divisions, perfect for applications such as clocking and resetting sequencers, syncing pingable modulation sources or triggering events. A set of jumpers at the back of the module allows for personalisation of the divider’s behaviour.Features:• Dual clock dividers• Dedicated potentiometer for each divider with two different ratio ranges• 4 jumpers at the back allowing customisation of the dividers (triggers/gates, auto-reset, alternative clocking)• Skiff friendly (25mm deep)• Intellijel and Pulp Logic format supportedDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.