Synthvoice
sold out at the moment
HEX cor is a digital polyphonic synthesizer with a capacitive keyboard, potentiometers for signal modulation and an adaptable looper that through its unusual shape explores new ways of interaction and sound synthesis.Features:• Capacitive pads• Recording button• Octave• Waveform• Decay• Loop speed• Loop length• Sync switch• Header pins• 3,5 mm headphone jack output• USB C power portDIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.
available
zetaSID is a compact 4HP Eurorack synthesizer voice that brings the legendary SID sound into a modern modular format. Based on the MIDIbox SID synthesis engine, it offers deep digital sound design, animated OLED visual feedback and powerful expansion through the midiphy phybus system.A single zetaSID works as a monophonic CV/gate-controlled SID voice, while multiple units can be linked into a larger polyphonic instrument. With nexusMIDI and phybus expansion, zetaSID can grow into a full MIDI-controlled synthesizer with up to six stereo voices, while unused CV and gate inputs can be reassigned as additional modulation sources.The sound engine includes six LFOs, two advanced envelopes, eight modulation paths, four wave sequencers, three oscillator arpeggiators and a 24 × 14 trigger matrix. This allows everything from classic chiptune tones and animated arpeggios to acid-style basslines, evolving digital textures and percussive C64-inspired sounds. zetaSID also includes Lead, Bassline and Drum engines, giving it a wide range of synthesis options in a very small footprint.The integrated OLED display visualizes oscillator outputs, arpeggio patterns, filter curves and other sound parameters, making patch editing more immediate. Thanks to phybus UI cooperation, multiple zetaSID modules can work together as one expanded interface, with different units controlling different parts of the same patch.zetaSID ships with 100 preset patches in its internal ROM bank and supports optional microSD storage for session recall and patch handling. With its milled aluminium front panel, compact depth and strong modular connectivity, zetaSID is a powerful SID-inspired Eurorack voice for chiptune, basslines, drums, experimental synthesis and expandable polyphonic setups.Features• Compact 4HP Eurorack SID synthesizer voice.• Based on the MIDIbox SID synthesis engine.• Monophonic CV/gate control or expandable polyphonic MIDI setup.• phybus expansion for multi-unit linking and UI cooperation.• Up to six stereo voices with 12 linked zetaSID modules.• Lead, Bassline and Drum sound engines.• Six LFOs, two envelopes and eight modulation paths.• Four wave sequencers and three oscillator arpeggiators.• 24 × 14 event trigger matrix for deep sound design.• Animated OLED display for oscillator, filter and pattern visualization.• 100 factory ROM patches included.• Optional microSD support for saving and recalling sessions.• CV input, gate input and Eurorack audio output.
available
Elmyra 2 is a 4-voice digital/analog hybrid platform for microtonal sonic exploration, capable of creating anything from lush ambient soundscapes to gritty droning textures and shrieking noises, available as a 42 HP Eurorack module or semi-modular desktop synth. With 31 modulation targets, 4 polymetric sequencers, delay, additional per-voice effects, a choice of various filters, as well as onboard LFOs and utilities, it is essentially a purpose-built small modular system in itself. A set of preset cards (included) or electronic components like capacitors or diodes can be plugged into the front panel in order to change the sound character.Features:• 4 independent voices activated by touch or CV• wavetable-based complex oscillator engine, up to 12 oscillators in total, 1V/octave compatible• chromatic mode makes chords and harmonic sounds possible, microtonal scales supported• 41 patch points• 31 modulation targets• touchpads with analog envelopes that can be used as modulation sources• resonant filter switchable between:• boomy and aggressive multimode 2-pole state variable filter (low-pass, band-pass, high-pass)• creamy 4-pole low-pass ladder filter• delay with unhealthy amounts of feedback• lo-fi reverb• analog OUCH circuit: a unique combination of destructive distortion, waveshaping and filtering• sonic character can be customised by using special preset cards (set of 4 included) or components like diodes that can be plugged into the front panel• preset cards can be used with other Neutral Labs modules• external audio can be processed via audio input• 9 per-voice modulations and effects:• unison detune• dual sub-oscillators• saturation• bitmangler• sample rate reduction• noise• high-pass filter• low-pass filter• 2 LFOs: 1 sine, 1 complex morphable• 4 sequencers with arbitrary step length per voice (up to 128), allows polymetric structures• delay time and LFOs can be clock-synced or unsynced (tap tempo is also possible)• utilities• dual attenuator/buffered multiple/voltage generator• CV summing circuit• solid bamboo wood case• boutique synth handmade in GermanyDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
available
Elmyra 2 is a 4-voice digital/analog hybrid platform for microtonal sonic exploration, capable of creating anything from lush ambient soundscapes to gritty droning textures and shrieking noises, available as a 42 HP Eurorack module or semi-modular desktop synth. With 31 modulation targets, 4 polymetric sequencers, delay, additional per-voice effects, a choice of various filters, as well as onboard LFOs and utilities, it is essentially a purpose-built small modular system in itself. A set of preset cards (included) or electronic components like capacitors or diodes can be plugged into the front panel in order to change the sound character.Features:• 4 independent voices activated by touch or CV• wavetable-based complex oscillator engine, up to 12 oscillators in total, 1V/octave compatible• chromatic mode makes chords and harmonic sounds possible, microtonal scales supported• 41 patch points• 31 modulation targets• touchpads with analog envelopes that can be used as modulation sources• resonant filter switchable between:• boomy and aggressive multimode 2-pole state variable filter (low-pass, band-pass, high-pass)• creamy 4-pole low-pass ladder filter• delay with unhealthy amounts of feedback• lo-fi reverb• analog OUCH circuit: a unique combination of destructive distortion, waveshaping and filtering• sonic character can be customised by using special preset cards (set of 4 included) or components like diodes that can be plugged into the front panel• preset cards can be used with other Neutral Labs modules• external audio can be processed via audio input• 9 per-voice modulations and effects:• unison detune• dual sub-oscillators• saturation• bitmangler• sample rate reduction• noise• high-pass filter• low-pass filter• 2 LFOs: 1 sine, 1 complex morphable• 4 sequencers with arbitrary step length per voice (up to 128), allows polymetric structures• delay time and LFOs can be clock-synced or unsynced (tap tempo is also possible)• utilities• dual attenuator/buffered multiple/voltage generator• CV summing circuit• case made of plant-based bioplastic and native German oakwood• boutique synth handmade in GermanyDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
available
This is the DIY Desktop version of this unit.Logic, Unbound. Meet Luna. The first serious Lunetta synthesizer.Look beyond clean waveforms and predictable polyphony. Luna takes you back to a time when digital didn’t mean perfect. It meant raw. Inspired by the subterranean DIY culture of the 70s and 80s, Luna is a love letter to the Lunetta machines of old – living, breathing organisms built from CMOS logic chips. But where those machines were fragile experiments, Luna is a weaponised instrument of sonic confusion.The Nervous System Exposed. True to the Neutral Labs philosophy, we don’t believe in hiding the magic behind an opaque faceplate. Luna features exposed CMOS inputs and outputs directly on the front panel. You're not simply patching cables – you are rewiring the brain of the synthesizer itself. Combine signals, bend logic, and physically intervene in the computation to create sounds that shouldn’t exist.Rhythm is Timbre. Timbre is Rhythm. In the world of Luna, there is no difference between a sequencer and an oscillator. The same digital pulse that drives a bass line can be accelerated into a screeching lead or folded into a metallic drone.Five oscillators provide the raw material. A chaotic array of logic blocks (XOR, NOT, AND, shift registers, counters, multiplexer) chews up those signals and spits out complex, evolving mathematical noise.Taming the Digital Mess. Raw logic can be harsh. To turn this binary chaos into music, Luna feeds its digital soul through three organic low-pass gates. These analogue circuits impart a natural decay and percussive punch to the madness, transforming mathematical errors into bongos, plucks, and thumping basslines.Drench it in Atmosphere. Once you’ve constructed your signal, destroy it again. Luna comes equipped with a suite of effects – distortion, delay, reverb, chorus, bitcrusher, phaser and more – to smear your logic into a wash of ambient bliss or gritty industrial texture.Features:• 5 oscillators• Logic gates (2 XOR, 2 NOT, 2 AND)• 5 logic blocks (5-step ring counter, 4-bit binary counter, 2 shift registers, 4-channel multiplexer)• 3 touchpads that generate logic signals• 3 channels for audio manipulation (low-pass gates with adjustable decay and switchable trigger mode, gain, tilt EQ)• 13 audio effects freely assignable to 2 effect slots running in series (drive, delay, reverb, 6 filter types, bitcrusher, phaser, chorus, comb filter)• CV control for effects and 2 oscillators• MIDI control over 2 oscillators, all 3 low-pass gates, and 3 logic outputs• 2 sequencers with up to 64 steps, syncable to clock or MIDI• Headphone-compatible audio outputDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
available
This is the DIY Eurorack version of this unit.Logic, Unbound. Meet Luna. The first serious Lunetta synthesizer.Look beyond clean waveforms and predictable polyphony. Luna takes you back to a time when digital didn’t mean perfect. It meant raw. Inspired by the subterranean DIY culture of the 70s and 80s, Luna is a love letter to the Lunetta machines of old – living, breathing organisms built from CMOS logic chips. But where those machines were fragile experiments, Luna is a weaponised instrument of sonic confusion.The Nervous System Exposed. True to the Neutral Labs philosophy, we don’t believe in hiding the magic behind an opaque faceplate. Luna features exposed CMOS inputs and outputs directly on the front panel. You're not simply patching cables – you are rewiring the brain of the synthesizer itself. Combine signals, bend logic, and physically intervene in the computation to create sounds that shouldn’t exist.Rhythm is Timbre. Timbre is Rhythm. In the world of Luna, there is no difference between a sequencer and an oscillator. The same digital pulse that drives a bass line can be accelerated into a screeching lead or folded into a metallic drone.Five oscillators provide the raw material. A chaotic array of logic blocks (XOR, NOT, AND, shift registers, counters, multiplexer) chews up those signals and spits out complex, evolving mathematical noise.Taming the Digital Mess. Raw logic can be harsh. To turn this binary chaos into music, Luna feeds its digital soul through three organic low-pass gates. These analogue circuits impart a natural decay and percussive punch to the madness, transforming mathematical errors into bongos, plucks, and thumping basslines.Drench it in Atmosphere. Once you’ve constructed your signal, destroy it again. Luna comes equipped with a suite of effects – distortion, delay, reverb, chorus, bitcrusher, phaser and more – to smear your logic into a wash of ambient bliss or gritty industrial texture.Features:• 5 oscillators• Logic gates (2 XOR, 2 NOT, 2 AND)• 5 logic blocks (5-step ring counter, 4-bit binary counter, 2 shift registers, 4-channel multiplexer)• 3 touchpads that generate logic signals• 3 channels for audio manipulation (low-pass gates with adjustable decay and switchable trigger mode, gain, tilt EQ)• 13 audio effects freely assignable to 2 effect slots running in series (drive, delay, reverb, 6 filter types, bitcrusher, phaser, chorus, comb filter)• CV control for effects and 2 oscillators• MIDI control over 2 oscillators, all 3 low-pass gates, and 3 logic outputs• 2 sequencers with up to 64 steps, syncable to clock or MIDI• Headphone-compatible audio outputDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
available
Crum Hum is a 3-voice experimental and expressive soundscaping instrument designed for generative and ever-evolving melodic and harmonic creation.The Crum Hum features 12 sound engines which range from simple sawtooth and square waves with lowpass filtering, to various wavetable and FM engines and more complex setups like bass, chords, and melody. There are also 12 different built-in scales to play with.Each of the three voices has a triangular touchpad that lets you control the timbre and volume simultaneously. Each voice also offers a Frequency knob for setting the lowest possible note, as well as a Random knob that sets the probability of notes being played for each clock pulse.The Tone knob affects the timbre of all three voices simultaneously. What it does exactly depends on the selected sound engine and the tone can also be randomized for subtle to drastic sonic variations at each clock pulse.Moreover, Crum Hum features built-in delay, reverb, and overdrive effects, as well as an LFO that can modulate the frequency, tone, or volume. There’s an internal clock generator, but it’s also possible to sync the synth to an external clock source. Most parameters can be controlled via MIDI CC (see the user manual for more details).In addition to a stereo audio output, Crum Hum features a CV output that corresponds to the touchpads, allowing for expressive control of other modular instruments.Features:• 3 x melodic voices with expressive touch control• 12 x different sound engines• Generative & randomized melodic and chord generation• 12 x different scales• Built-in delay, reverb, overdrive and LFO• 3.5mm CV output• 3.5mm Clock input• Send and receive Midi sequencing and Midi CC.
sold out at the moment
The Blast module is designed to make crafting great kick drums easier. It helps you overcome the challenges of balancing low-end depth, midrange impact, and high-frequency clarity to create kicks that feel powerful and sound cohesive.Blast focuses on the essential elements of a kick drum: delivering enough punch to stand out in the mix while maintaining a full, rich sustain. Its unique envelope offers a fast decay with a slower release for amplitude, ensuring a tight, punchy transient without sacrificing fullness. In addition, the Body Control feature allows you to increase the weight of the kick, adding depth and power without overpowering the mix. With tools like compression, envelope shaping, and subtle distortion, Blast gives you the flexibility to shape the transient for just the right amount of impact and definition-without overcomplicating the process.Whether you're looking for a clean, punchy sound or a more versatile tone, Blast offers intuitive controls that adapt to a wide range of musical styles. It's designed to help you get the sound you want easily and effectively, without compromising quality.Features:• Analog kick drum module• Manual and trigger input• Separate amplitude and pitch decay controls, both with CV inputs• Unique envelope provides a fast decay with a slower release• Body control to increase the weight of the kick• Compression with soft clipping• Pitch amount to determine how offset the initial pitch is• Blendable waveshape distortion with wave folding• Thru-zero FM input• AM input• Accent input with level/accent attenuator• Tuning control and 1V/Oct input for consistent pitch tracking• Final output plus a unipolar positive and unipolar negative amp envelope outputsDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
available
This is the DIY Desktop version of this unit, but it can also used as an Eurorack module. Plinky is an 8 voice expressive polyphonic touch synthesizer that specializes in fragile, melancholic sounds, designed by mmalex.Think of it as an eight stringed instrument, with eight vertical monophonic strips. You can play it straight away on its 64 main pads. Each of the eight strings has 4 oscillators or sampler grains, detuned by the touch of your fingers, white noise, two ADSR envelopes and a resonant 2-pole low-pass gate. Plinky also has a global delay, reverb, high pass filter and saturation along with a simple mixer, arpeggiator, sequencer and sampler. It supports four external CV modulation sources, each with their own LFO.Plinky was released in 2021, then hit hard by the chip crisis. In coordination with Plinky’s creator mmalex, Making Sound Machines are bringing back Plinky both as assembled unit and as a beginner-friendly DIY Kit.Plinky v3 integrates TRS MIDI input and output directly on-board, so you sequence polyphonic chords externally and play a melodic line on top on its touch surface.The revision also upgrades to USB-C, optimizes the build experience, and introduces improvements to the audio path.Works as standalone unit with USB-C power or Eurorack power cable. DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
Plinky+ is the enhanced evolution of the beloved Plinky DIY synthesizer, created by mmalex and thoughtfully upgraded in collaboration with Making Sound Machines. It retains full firmware compatibility with the original, while introducing major hardware improvements that elevate its playability, durability, and connectivity.Designed for hands-on expressiveness and modular integration, Plinky+ combines a refined interface with the same lush digital audio engine that made the original a favorite among sound explorers.Upgraded Features:• Expanded Touch SurfaceAll audio and CV jacks have been relocated to the back, freeing up the entire front panel for a larger playing area. The new 22 mm spacing per strip offers keyboard-like ergonomics for precise pitch and pressure control. The redesigned layout also features a full 16 cm strip length for detailed performance gestures.• Larger OLED DisplayA high-contrast, wide-format white-on-black OLED screen replaces the smaller original, offering improved visibility from various angles – perfect for live use and in-studio sessions.• Sturdy Metal EnclosurePlinky+ comes housed in a durable, black powder-coated metal case that keeps it steady on your desk or performance rig. At just under 1 kg, it's lightweight yet solid.• Dust Protection IncludedA clear PET-G lid is included to keep your instrument safe from dust when not in use.• Expanded ConnectivityPlinky+ integrates the full feature set of the original Plinky plus the ABXY CV outputs from the expander – now built in. All I/O is now rear-mounted for cleaner cable management and ergonomic play.• Improved Sound OutputThe analog output section for line, headphone, and Eurorack levels has been completely redesigned for enhanced clarity and dynamic range. Stereo outs now use balanced 6.3 mm jacks, and a dedicated volume knob on the front panel gives you quick access to output control.• Battery-Ready (Optional)While not shipped with a battery, Plinky+ includes a power circuit and connector for retrofitting a battery pack – ideal for portable setups.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All parts are pre-soldered. It's a dry assembly with a screwdriver, similar to the Moog Mavis and Werkstatt.For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
The Witch is a compact and versatile polyphonic synthesizer. The Witch can be used Standalone, with a MIDI Controller, Analog Sequencer, or MIDI Polyphonic Expression / MPE Controller. It's USB powered or with 9V DC.It comes with four different synth engines:• SubTract Virtual Analogue synthesizer with 48dB resonant filter• VoSim Voice Simulator formant synthesizer• WaveBank Morphing wavetable synthesizer• QuadSampler Sampler with peak filterEach synthesizer engine is provided in two variants:• Expression Mode Continuous pitch control and MPE support• Performance Mode Discrete pitch control, standalone chords and classic MIDI supportOther features include two assignable tap tempo LFOs with continuously variable shapes and a powerful effects section.As well as eight factory patches, the Witch is fully compatible with the OWL Library of more than 300 patches. What’s more, users can create their own patches using any of the supported DSP languages: Pure data, Max gen~, SOUL, Faust, Maximilian and C++.The Witch has its own Synth Editor web application: witch.rebeltech.orgDIY-Kit-Type:THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
available
All knobs and no menus, an FM synth engine with hands-on controlALGO's four oscillators can be configured in series or parallel combinations, to create Complex FM or additive sound textures.A unique Algorithm Display indicates the signal flow from one oscillator to another - easy to understand FM with pretty twinkly lights!Each oscillator has controls for Level and Frequency, allowing easy adjustment of FM timbres, no menu diving snorkels needed.Modulation inputs for Frequency or Level for each oscillator - patch in a couple of Envelopes, and you have an instant FM synth voice.Bored of Sine waves? A generous Wave Warp control bends things through Triangle to Pulse wave and back again.Wave Warp can be applied to Carrier, Modulator or both types of oscillator.For the more discerning mangler, Wave Folding is also available in three delicious flavours; Symmetric, Asymmetric and Soft Clip!A Global Detune spread control with CV input is great for creating Netflix apocalypse drones that descend into the abyss.Lastly an onboard Stereo Chorus can add a vivacious 1980's shimmer to all your FM creations.Oh, nearly forgot. It's Stereo !Features:• Frequency range 8 Hz - 35 kHz• Sampling frequency 85 kHz @ 2 x oversampled (170 kHz)• Four through zero oscillators• Harmonic intervals, Fine tune, or Fixed frequency options for each oscillator• Amplitude OR Frequency/V/OCT CV inputs for each oscilator• 9 FM algorithm combinations• Wave Shaping and three types of Wave folding• Multi Stage vari-speed high quality chorus effect• Stereo output, with Pan control for each oscillator in the stereo field• Pretty lights !PLEASE NOTE THE KIT IS ONLY SUITABLE FOR EXPERIENCED BUILDERS.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
available
FM & Vector Synthesis - Two icons of the '80s in one unit!Introducing the new Vector Wave from RYK Modular bringing together the awesome power of 16 oscillator FM, combined with Vector synthesis OR true multi voice polyphony.The Vector Wave is a feature packed compact Eurorack module, which can be used as a stand alone synth-voice without the need for external VCA,ENV, LFOs etcWARNING! To build the kit you MUST have the following:• Accurate and stable 5.00V reference source to calibrate the module• Flux pen, or liquid flux• Two mini clamps• Clean high quality 2/3mm tip solder iron [chisel type recommended]Features:• 16 oscillators, divided into 4 banks, oscillators can freely configured into series or parallel combinations for complex FM or additive synthesis• A cute Vector Joystick for morphing between oscillator banks, for cool performance timbre sweeps and sonic movementVectors can be recorded from the joystick and replayed from trigger sources, or animated from external or internal modulation sources• Super cool retro Big-Pixel screen, ideal for nostalgia freaks or the visually impaired• Wave Warping brings grit and aggression to the FM synthesis with oscillators continuously variable between Sine,Tri-ish Saw, Pulse waveform• Wave Folding for subtle to extreme sonic bending• Two Envelope generators [per voice in polyphonic modes], and two LFOs with all controls assignable as modulation destinations• Intuitive Modulation Slot patching from external and internal sources to be routed to any parameter within the Vector Wave• 30 User Voice storage spaces for storing your synth masterpieces to internal memory, enabling you to impress your friends at a later date• Thee modes of oscillator bank allocation Monophonic Vector, and Polyphonic Voice, and Multitimbral Polyphonic• MIDI input for a spaghetti-free Polyphonic setup, velocity, aftertouch and MIDI CCs avail- able as modulation sources• Slim but handsome Expander Module also available that adds 3 more V/oct and Gate inputs, for maximum mutli-voice multitimbral melodious mayhem!PLEASE NOTE THE KIT IS ONLY SUITABLE FOR EXPERIENCED BUILDERS.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
only 2 left
V/Oct and Gate expander for RYK Vector Wave.The slim but handsome Vector Wave Expander module, adds 3 extra V/Oct and Gate inputs to the Vector Wave.Using Multi Timbral mode, these extra inputs can control 4 separate monophonic synth voices within the Vector Wave.This is a great way to add multi voice synth parts in a compact and unique Eurorack module!
available
Polyphonic Synth VoiceBread & Butter is a General MIDI based polyphonic synth voice with 128 selectable instruments plus a drums preset. The sound banks have a synthetic and warm quality to them, and the variety of instruments makes this module a flexible and fun addition in any system.Bread & Butter features the standard V/OCT and GATE inputs for triggering the synth voice. Thanks to a polyphony of up to 64, the voices will decay independently making it possible to ratchet chords that decay polyphonically. If the HOLD function is engaged, each note will also sustain. In addition, the MIDI input can be used simultaneously with the V/OCT and GATE inputs. For example; trigger the drums on MIDI channel 10 while generating a bass line via the V/OCT/GATE inputs. The synth voices can also be played polyphonically via MIDI.The module features stereo outputs and the PAN knob lets you spread the polyphonic voices out in the stereo sound field. Parameters such as pitch bend, velocity and instrument selection can be voltage controlled.Features:• CV input range: +/- 5V• Gate input voltage: 3,3-10V• Polyphony: Up to 64 voices (40 voices with sustain)DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
available
Rhythmatic is a complete analog drum machine for Eurorack, inspired by the iconic CR-78 and packed with modern features. It includes six classic analog drum voices, Bass Drum, Snare Drum, Low Conga, Rim Shot, Hi-Hat, and Cymbal.The built-in sequencer supports up to 64 patterns with polymetric sequencing across 16 steps, and it comes pre-loaded with original CR-78 patterns and exclusive banks by Sebsongs Modular, Konstantine, and Salkinitzor.A standout feature is the central randomization knob, which adds or subtracts steps to create evolving patterns—ideal for live performance. Holding the shift button transforms this knob into a loop recorder, capturing real-time tweaks and changes. Rhythmatic also includes voice mute buttons, configurable trigger I/O jacks, voltage control over key parameters, external clock/reset inputs, and flexible audio routing. Combining vintage sound with creative control, Rhythmatic is a versatile and performance-ready analog drum module.Features:• Six analog drum voices: Bass Drum, Snare Drum, Low Conga, Rim Shot, Hi-Hat, and Cymbal• Tune and decay controls for Bass Drum and Snare, decay control for Cymbal• 64-step sequencer with polymetric capabilities• 64 pre-programmed patterns, including CR-78 classics and artist-created banks• Real-time pattern randomization with central performance knob• Loop recorder function for pattern changes and knob movements• Individual mute buttons for each drum voice• Configurable trigger jacks for input or output per voice• Voltage control over pattern and randomization parameters• External clock and reset inputs• Dual audio outputs with voice split functionality• Designed for creative sequencing and live performance in Eurorack systemsDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
available
The Battering Ram is a bass drum synthesizer based on an original design by Marc Nostromo. This module offers precise control over various parameters, including decay, tuning, depth, click amount, and drive. These controls have been thoughtfully mapped to provide sweet spots at every combination of potentiometer settings. The drive section can seamlessly transition between two distinct wave-shaping modes, ranging from smooth drive/compression to hard-clipping distortion for core music lovers. For smooth modular integration, there's an additional output that mirrors the amplitude envelope or its inverted shape.The module also boasts other convenient features, such as storing and recalling potentiometer settings, a 3-pole high-pass filter, and the option to use gates instead of triggers. Despite its compact size, the Battering Ram delivers a diverse range of bass drum sounds, from long sub-bass drums to aggressive techno kicks.Features:• Kick drum module based on an original design• Expansive sonic palette spanning from 808-inspired sub-bass to assertively distorted kicks• Dual drive options: a subtle fold for gentle saturation or a high-gain distortion with clipping• Amplitude envelope output with inversion switch• CV control over different parameters including a V/oct pitch input• Dynamic phrasing through velocity input.• Pitch locking functionality transforms the tuning potentiometer into an octave switch• Gate mode• Switchable 30Hz 3 poles high pass filter• Store and recall panel parameters feature• Select bus compatibility with 16 presets• Djtechtools rubber injected knobs• Skiff friendlyDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
available
At its core, Boba Fat features two oscillators that empower producers to easily craft both earth-shaking sub-basses and delicate, enveloping kicks.Features:• Analog Drum Generator• Designed for Kick- and Bassdrums• Two Voices: Soft Mallet and Hard Mallet• Each Mallet may be triggered independently• Internal LFO with Sync• Volume and Boost per Voice• Groove CV Input „Vari“ for Hard Mallet• Mod CV Input for Soft MalletDIY-Kit-Type:Panel/PCB Kit. This is a do-it-yourself panel/PCB kit, no parts are supplied, you will need to source them yourself.
sold out at the moment
Discover the Touch 2, an instrument designed for hands-on control and tactile interaction. Easily upload different instruments via USB and start playing instantly!Open source instruments included: BASS // STRING // LOOPER // FX // DRUMS // SLICERCheck out the product page for the complete instrument list, download links, and videos. https://www.synthux.academy/simple-synth/touch2Key Features:Swappable Faceplates: Includes 4 different faceplates for versatile performance.12 Touch Pads: Experience a responsive, tactile performance every time.Powered by the Daisy Seed microcontroller, the Touch 2 delivers incredible sound quality with any instrument you load onto it. Plus, it's fully programmable! Create your own unique instruments using C++, Arduino, Max, or Puredata.Upgrade your music-making experience with the Touch 2. Order now and elevate your performance!Features:• Programmable. All Simple kits come with the Daisy Seed microcontroller and access to our introduction to synth programming video course.• Open source instrument on Github.• Each kit comes with a video course teaching sound fundamentals: https://learn.synthux.academy/• Powerful music instrument for live performances.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
sold out at the moment
The 3394 Voice is a compact and flexible analog synth voice that packs a full signal chain into one module.VCO, VCF, VCA, envelopes, and noise. Based on the classic 3394 chip, it delivers rich analog tone with selectable square, saw, and triangle waveforms, routed through a juicy 24dB low-pass filter capable of self-resonance and pitch tracking. Two built-in envelopes shape both filter and amplitude, with switchable AD/AR modes for dynamic control. When unpatched, it acts as a constant VCO output, and the mix trimmer allows tonal variation by blending in a square sub, noise, or external signal. Ideal for melodic lines or snappy percussive sounds like kicks, snares, and zaps, the 3394 Voice is both a complete voice and a set of standalone building blocks for your Eurorack system.Features:• VCO with Triangle/Square/Saw waves• Lowpass resonant 24db filter• Square sub oscillator• Analog noise source• Built in VCA and 2 envelopes• Can also be used as separate Filter/VCO/VCA/Noise sourceDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.