only 2 left
Midiphy - Wirescanner is a compact DIY cable tester designed to quickly validate IDC and MicroMatch ribbon cables used in Eurorack, MIDIbox and midiphy hardware builds. Instead of guessing where a cable fault might be, the Wirescanner displays the connection pattern graphically on a 16 × 16 LED matrix, making continuity errors, wrong pin mappings or faulty ribbon cables easy to spot at a glance.The tool is especially useful when building or servicing complex DIY projects such as the midiphy SEQ v4+, MatriX or other systems using internal ribbon connections. It supports IDC 8/10/16 and MicroMatch 8/10 cables, covering common Eurorack power cables as well as many internal data connections found in synth and DIY electronics projects.Built without a microprocessor, Wirescanner offers a direct and practical testing workflow: connect the cable, check the LED pattern and confirm whether the wiring is correct. A clean diagonal line indicates a properly wired straight cable, while deviations immediately reveal crossed, missing or problematic connections.The full kit includes the necessary parts and enclosure, making it a useful workshop tool for DIY builders, modular technicians and anyone assembling ribbon cables by hand. Small, visual and easy to use, the midiphy Wirescanner helps prevent hard-to-trace build errors before they become bigger problems.Features:• DIY cable tester for IDC and MicroMatch ribbon cables.• Supports IDC 8/10/16 and MicroMatch 8/10 connections.• Graphical 16 × 16 LED matrix for visual cable validation.• Useful for Eurorack power cables and internal synth DIY wiring.• Helps detect crossed, missing or faulty cable connections.• No microprocessor required.• Full kit includes all parts and enclosure.• Practical tool for midiphy SEQ v4+, MatriX and MIDIbox builds.• Suitable for DIY builders, repair benches and modular workshops.DIY-Kit-Type:SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.
only 2 left
nexusMIDI is a 6HP Eurorack phybus expander that adds four classic DIN MIDI ports to connected midiphy modules such as zetaSID. With two MIDI inputs and two MIDI outputs in standard 5-pin DIN format, it makes it easy to connect external keyboards, controllers, sequencers, DAWs and MIDI hardware to a phybus-based modular setup.Designed as the central MIDI gateway for zetaSID and other phybus instruments, nexusMIDI enables polyphonic MIDI keyboard control, MIDI clock synchronization, modulation via pitch bend and mod wheel, velocity-sensitive dynamics, SysEx patch transfer and ASID SID-file playback. In combination with multiple zetaSID modules, it turns a phybus instrument cluster into a classic MIDI-controlled polyphonic synthesizer with up to six stereo voices.The module uses reliable standard MIDI circuitry for stable communication, even with longer MIDI cables. MIDI data can be routed through the phybus network using virtual patching, reducing cable clutter while keeping connected modules flexible and recallable. Status LEDs provide clear visual feedback for MIDI activity and available ports, making nexusMIDI practical in both studio and live setups.With its high-quality milled aluminium front panel, compact 30mm depth and standard Eurorack power connection, nexusMIDI is a focused expansion module for musicians who want to integrate zetaSID and phybus systems with traditional MIDI workflows.Features• 6HP Eurorack MIDI expander for phybus systems.• Adds 2 × MIDI In and 2 × MIDI Out via standard 5-pin DIN ports.• Designed for zetaSID and other midiphy phybus modules.• Enables polyphonic MIDI control of zetaSID clusters.• Supports MIDI clock sync for arpeggiators, LFOs and wave sequencers.• Routes pitch, gates, triggers and modulation via phybus.• Supports pitch bend, mod wheel and velocity-based control.• Sends arpeggios, SysEx patch data and MIDI messages to external gear.• ASID over SysEx support for SID-file playback with zetaSID.• Status LEDs for MIDI activity and port feedback.• High-quality milled aluminium front panel.• Power consumption: +12V 90mA, no −12V or 5V required.• Up to 15 nexusMIDI units per bus expansion, 60 physical MIDI ports total.
available
zetaSID is a compact 4HP Eurorack synthesizer voice that brings the legendary SID sound into a modern modular format. Based on the MIDIbox SID synthesis engine, it offers deep digital sound design, animated OLED visual feedback and powerful expansion through the midiphy phybus system.A single zetaSID works as a monophonic CV/gate-controlled SID voice, while multiple units can be linked into a larger polyphonic instrument. With nexusMIDI and phybus expansion, zetaSID can grow into a full MIDI-controlled synthesizer with up to six stereo voices, while unused CV and gate inputs can be reassigned as additional modulation sources.The sound engine includes six LFOs, two advanced envelopes, eight modulation paths, four wave sequencers, three oscillator arpeggiators and a 24 × 14 trigger matrix. This allows everything from classic chiptune tones and animated arpeggios to acid-style basslines, evolving digital textures and percussive C64-inspired sounds. zetaSID also includes Lead, Bassline and Drum engines, giving it a wide range of synthesis options in a very small footprint.The integrated OLED display visualizes oscillator outputs, arpeggio patterns, filter curves and other sound parameters, making patch editing more immediate. Thanks to phybus UI cooperation, multiple zetaSID modules can work together as one expanded interface, with different units controlling different parts of the same patch.zetaSID ships with 100 preset patches in its internal ROM bank and supports optional microSD storage for session recall and patch handling. With its milled aluminium front panel, compact depth and strong modular connectivity, zetaSID is a powerful SID-inspired Eurorack voice for chiptune, basslines, drums, experimental synthesis and expandable polyphonic setups.Features• Compact 4HP Eurorack SID synthesizer voice.• Based on the MIDIbox SID synthesis engine.• Monophonic CV/gate control or expandable polyphonic MIDI setup.• phybus expansion for multi-unit linking and UI cooperation.• Up to six stereo voices with 12 linked zetaSID modules.• Lead, Bassline and Drum sound engines.• Six LFOs, two envelopes and eight modulation paths.• Four wave sequencers and three oscillator arpeggiators.• 24 × 14 event trigger matrix for deep sound design.• Animated OLED display for oscillator, filter and pattern visualization.• 100 factory ROM patches included.• Optional microSD support for saving and recalling sessions.• CV input, gate input and Eurorack audio output.